Kollmorgen

You are here:
  1. Home
  2. Kollmorgen
  3. Page 86

Kollmorgen AKD-P01206-NBESF

Product Introduction:​
The AKD-P01206-NBESF is a high-performance Ethernet-based digital servo amplifier from Kollmorgen's AKD family. It is a position-indexer type drive designed for single- or multi-axis motion control systems requiring fast response, high bandwidth, and plug-and-play compatibility with AKM servomotors. The "NB" denotes a book-size form factor with natural convection cooling (no fan), suitable for clean-room or noise-sensitive environments. "ESF" indicates EtherCAT or SynqNet fieldbus communication support.

Kollmorgen B-102-A-99-066

Product Name:​ Goldline B Series Size 102 Frame Brushless Servo Motor, A-winding
Introduction:​ Low-inertia, rare-earth magnet (NdFeB) permanent magnet synchronous motor for 230 VAC drive input. Intended for rapid acceleration/deceleration small-load applications.

Kollmorgen SR03000-2G104A

Product Name:​ SERVOSTAR SR03000 Digital Servo Amplifier / Spindle Drive (Legacy Goldline Era)
Product Introduction:​ Part of the discontinued SERVOSTAR SR family for controlling Goldline B/M/BH/MH series brushless servo motors. Provides torque, velocity, and position control with resolver or encoder feedback.

Kollmorgen AKD-B01207-NBA-AC

Product Introduction:​ Same hardware platform as AKD-P but with on-board BASIC runtime and KAS (Kollmorgen Automation Suite) compatibility—can execute multi-axis motion programs without a PLC/master.
Key Differences from AKD-P:​ Built-in program memory, multi-task execution, can operate as standalone motion controller.

Kollmorgen AKD-P00307-NBP-N-I000

Product Name:​ AKD™ High-Performance Digital Servo Drive, Position Indexer Version
Model Breakdown:
  • AKD:​ Platform
  • P:​ Position Indexer (onboard motion tasking / program storage)
  • 003:​ 3 Arms continuous output

Kollmorgen ME2-405-A-A2

Product Name:​ Kollmorgen ME-Series Pre-assembled Servo Motor Cable (Power + Feedback combined or separate per config)
Product Introduction:​ Factory-molded cable assembly for connecting AKM servo motors to AKD/S300/S700 drives. ME2 denotes motor-end connector type (M23 SpeedTec), 405 indicates length/configuration, A-A2 = power + feedback combo, specific pinout for AKM series.

Kollmorgen AKM65L-ACCNR-00

Product Name:​ AKM65L Brushless Permanent Magnet Synchronous Servo Motor
Product Introduction:​ Frame Size 6 (138×138 mm flange), stack length "L" (long), winding "C", resolver feedback, no holding brake, no shaft key (smooth shaft), standard IP54.

Kollmorgen AKM52G-ANC2EJ00

Product Introduction:​ AKM52 is a Size 5 (flange 108×108 mm IEC), 4-stack-length "G" winding servo motor with high torque density, low cogging, and Neodymium-Iron-Boron permanent magnets. AN = resolver feedback, C2 = Smooth shaft w/o keyway, EJ00/0 = specific connector & brake configuration variant.

Kollmorgen AKD-B00306-NCS

Product Brief:​
Entry-level AKD drive with CANopen (DS301/DSP402) interface. "B" = CANopen; "00306" = 3 A continuous, 120/240 VAC; "N" = No STO; "CS" = screw terminals, standard I/O. Ideal for cost-sensitive multi-axis machines using CANopen master.

Kollmorgen AKM65L-ACCNR-0-0

Product Brief:​
Mid-size AKM servomotor with 138 × 138 mm flange, low-cogging stator design, Neodymium magnets, and standard 2-pole brushless resolver. "L" = long-stack winding giving higher continuous torque; "ACCNR" = resolver feedback, no brake, smooth shaft (no keyway on some variants — keyed also available).

Kollmorgen AKD-P01206-NBCA

Product Brief:​
High-performance AKD platform drive with EtherCAT fieldbus interface. Delivers 12 A continuous / 30 A peak from a single-phase or three-phase 120/240 VAC supply. "P" = EtherCAT; "N" = No STO option on this variant; "BCA" = connector style, standard I/O, no custom mod

Kollmorgen 6SM 37S-6.000

Product Brief:​
High-dynamic-response, 3-phase brushless PM servo motor with Neodymium-Iron-Boron magnets. The "37S" denotes a small-frame, low-inertia variant; "-6.000" indicates 6000 rpm maximum mechanical speed.