Kollmorgen

You are here:
  1. Home
  2. Kollmorgen
  3. Page 35

Kollmorgen BDS5-210-00010-404B-2-020

Product Introduction:​
The BDS5 series are compact digital drives primarily for stepping motors but also capable of controlling brushless DC/AC servo motors in indexed or analog mode. The BDS5-210-00010-404B-2-020 is a 240 VAC input, 10 A peak drive with specific I/O and feedback configuration ("404B" = I/O config; "2-020" = firmware/cable option).

Kollmorgen S30661-NA-SB

Product Introduction:​
The S300 series is a compact digital servo drive for brushless AC servo motors. S30661-NA-SB indicates a 6 A continuous / 12 A peak drive with standard analog ±10 V command interface, no fieldbus option (NA = none), SB = specific firmware/hardware revision. Supports 1- or 3-phase 110–480 VAC input depending on model variant (S3066x typically 1×230 V or 3×208–480 V).

Kollmorgen B-202-C-23

Product Introduction:​
The Goldline B-Series are low-inertia, rare-earth magnet brushless servo motors designed for 230 VAC operation. The B-202-C-23 has a 20-frame (92×92 mm flange), stack length 2, winding type C, resolver feedback, open keyway shaft, rear shaft extension, Class H insulation, and built-in thermostat.

Kollmorgen S61401-SE/ATS-S61401-560

Product Introduction:​
The SERVOSTAR 600 series (predecessor to S700/AKD) is a digital servo amplifier supporting vector control of AC brushless servo motors. S61401-SE is the standard 14 A continuous version with RS232/analog command; ATS-S61401-560 is an ATS-configured or spare variant of the same drive.

Kollmorgen CB0655112

Product Introduction:​
CB-prefixed part numbers are Kollmorgen standard pre-assembled motor cables. CB0655112 typically denotes a 6.5 m (65-series length code) power or brake cable with specific pinout/connector for AKM servomotors—often a motor power + brake cable with circular metric connectors.

Kollmorgen CH041A-13-3305

Product Introduction:​
The Cartridge DDR is a frameless-style direct-drive rotary motor pre-assembled into a stainless-steel cartridge housing with bearings, rotor, stator, and high-resolution encoder—combining the compactness of frameless technology with the ease of installation of a housed motor. CH041A-13-3305 indicates a size-041 cartridge with specific winding (A), shaft seal, stack length, and EnDat or similar feedback.

Kollmorgen S70102-NANANA

Product Introduction:​
The S700 series is a fully digital, high-performance servo drive for single-axis motion control. The S70102-NANANA is the smallest frame in the S700 lineup, offering 1.5 A continuous / 2.5 A rated output at 3×208 VAC, suitable for small to medium servo motors. It features onboard Ethernet, EtherCAT option, Safe Torque Off (STO), and supports single-cable feedback (SFD3, Hiperface DSL).

Kollmorgen MW0500512

Product Introduction:​
The MW050xxxx series are compact power stages / interface modules used with Kollmorgen's IL (IronLess) linear motor drives—part of the ServoStar Micro / IL drive family. MW0500512 typically denotes a 0.167 kW ironless linear axis power module rated ~2.1 A continuous / 7.0 A peak, designed to drive low-power ironless linear motors in precision positioning applications.

Kollmorgen TTR-5301-137-A

Product Overview:​
The TTR-5301-137-A is a legacy Kollmorgen Industrial Drives (KID) product — typically a brushless servo motor or a matched resolver/feedback sub-assembly originally supplied with Goldline-era motors. Many TTR-prefixed parts are replacement rotors, stators, or complete motors with built-in resolver feedback for B/M-series.

Kollmorgen 403A-P/S403BA-PB

Product Name:​ SERVOSTAR® 400 Series Digital Servo Drive, 3 A Continuous, Profibus Option
Product Overview:​
The SERVOSTAR 403A-P (shipped as S403BA-PB) is a compact, DSP-based digital servo amplifier for controlling brushless AC servo motors. "403" = 3 A continuous output; "A" = 230 VAC class; "P" = Profibus DP fieldbus interface; "B" in S403BA-PB = standard I/O/config.

Kollmorgen M-607-A-B1-E1

Product Overview:​
The M-607 is a medium-inertia counterpart to the low-inertia B-series, suited for applications with larger reflected load inertia. "A-B1-E1" typically specifies winding A, resolver feedback, standard shaft/connector, and specific mounting/lead-length option.

Kollmorgen CKM30B-AKCNT-00

Product Overview:​
The CKM series is Kollmorgen's economy-line synchronous servo motor offering good torque density at competitive cost. "CKM30B" = 130 mm flange, B-winding (medium voltage/torque), "AKCNT-00" decodes to: no brake, standard feedback (2500 ppr incremental encoder or SFD), smooth shaft or keyed, standard connectors.