Kollmorgen

You are here:
  1. Home
  2. Kollmorgen
  3. Page 90

Kollmorgen 6SM-77S-3.000-09-V/12

Product Introduction:
The 6SM series (also known as Kollmorgen Seidel 6SM) are three-phase brushless synchronous servo motors with rare-earth neodymium permanent magnet rotors, optimized for high dynamic response and compact installation. The 6SM-77S-3.000-09-V/12 denotes frame 77 mm, S-length (medium), 3000 min⁻¹ rated speed, 9-pole resolver or encoder feedback (V = resolver/encoder variant), winding code 12.

Kollmorgen B02407-NBA/P02407-NBE

Product Introduction:
The AKD® series is Kollmorgen's next-generation Ethernet-based servo drive family, designed for fast commissioning and high-bandwidth motion control. The B02407-NBA and P02407-NBE are 24 A continuous / 48 A peak models operating from 240–480 VAC 3-phase mains, intended for medium-to-high power servo applications. "NBA" and "NBE" denote variant configurations (interface / option card differences such as analog, CANopen, or EtherCAT ready).

Kollmorgen S70302-NANANA-NA-024

Product Name:​ S700 Single-Axis Servo Amplifier / Servo Drive, 3 A Continuous, EtherCAT + CANopen
Series:​ S700 (advanced digital servo drives, successor to S600)
S70302 = 3 A continuous, 9 A peak; NANANA = No extra option cards (std I/O, resolver+encoder ports, no STO module fitted externally), NA = standard; 024 = firmware/hardware revision or country code.

Kollmorgen B-204-C-31

Product Name:​ GOLDLINE® B-204-C Brushless Rare-Earth Servo Motor
Series:​ GOLDLINE B (Low-Inertia, NEMA/Metric Frame)
B-204 = Frame size 20 (NEMA 42–56 equiv.), stack length 4; C = Winding code; -31 = Option (resolver feedback, standard seals, no brake, metric/NEMA flange)

Kollmorgen M00607-MCEPDMM

Product Name:​ Kollmorgen Pre-assembled Servo Motor Cable (Power + Feedback combo or Power-only) for AKM Series
Part Pattern M00607-MCEPDMM:​ "M" prefix = cable/motor cable assembly; 00607 ≈ 6 m length (typical interpretation in Kollmorgen cable numbering); MC = Motor Cable; EPDM = EPDM outer jacket (oil-resistant, flexible); M = Metric connectors (M23 SpeedTec); last M = variation/revision.

Kollmorgen CE03251

Model CE03251:​ Typically a single-axis PWM servo amplifier, 3 A class (≈1.2 kW), 1×220 VAC or 3×208 VAC input depending on exact sub-version.
Description & Function:​
Compact, DIN-rail or panel-mount servo amplifier providing torque/velocity control via ±10 V analog command or step/direction. Compatible with AKM mini-series and Goldline small-frame motors. Often used as a cost-effective stand-alone drive.

Kollmorgen B-402-BD-99-TS-294

Product Name:​ GOLDLINE® B-402 Brushless Permanent-Magnet Servo Motor, Low-Inertia, NEMA/Metric Mount
Series:​ GOLDLINE B (legacy high-performance rare-earth magnet servo motors)
Decoded:​ B = Goldline B series; 402 = Frame size 40 (approx. NEMA 56–66 frame), stack length 2; BD = Winding/feedback config; 99 = Special modification code; TS-294 = Custom option/tag.

Kollmorgen S61000-PB

Product Name:​ SERVOSTAR 610 Digital Servo Drive / Servo Amplifier, 10 A Continuous
Series:​ S600 (predecessor to S700, fully digital PWM servo drive)
Model S61000-PB:​ 10 A RMS continuous, 20 A peak, 230–480 VAC 3-phase input, forced convection cooling (built-in fan), PB = standard I/O + resolver/encoder feedback.

Kollmorgen AKM33H-ACMNR-0

Product Description & Working Principle:​
A 3-phase permanent-magnet (NdFeB) synchronous AC servo motor with very low cogging torque. The rotor magnetic field interacts with stator windings energized by a servo drive to produce precise torque/speed. Rotor position is sensed by an integral resolver for commutation and closed-loop control.

Kollmorgen AKD-P02407-NBEr

Product Name:​ AKD™ Panel-Mount Servo Drive, Position Indexer Version with Internal Regenerative Resistor
Series:​ AKD (Next-Generation Ethernet-Based Servo Drives)
Part Number Meaning:​ P = Position Indexer (Motion Tasking); 024 = 24 A continuous; 07 = 3×400–480 VAC input; N = Standard I/O; B = Internal Brake/Regen Resistor; Er = EtherNet/IP capable variant.

Kollmorgen S70102-NANA

Product Introduction:​
Smallest member of the S700 family, intended for low-power servo axes. Same architecture and feature set as S70602 but derated to 1.5 A continuous. "NANA" = No fieldbus expansion card fitted (base analog/pulse+direction + RS-232), no extra safety card — STO is still onboard. MMC slot present for parameter storage.

Kollmorgen DBL3H00250QR2000S40

Product Introduction:​
The DBL series are rugged, high-performance brushless servo motors with smooth rotor surfaces and very low cogging. The DBL3 frame is a mid-size (approx. 130 mm flange). "H" denotes a winding optimized for 230/400 VAC (320 VDC bus typical), "00250" = 2.5 kW rated power, "Q" = resolver feedback (or resolver+encoder per option table), "R2000" = 2000 line encoder/feedback option, "S40" = SpeedTec M23 connector, IP65, with brake omitted (no -B suffix).