Kollmorgen

You are here:
  1. Home
  2. Kollmorgen
  3. Page 96

KOLLMORGEN S20660-SRS

Product Brief:​ The S200 series is a compact, high-dynamic-response digital servo drive for brushless DC/AC servo motors. The -SRS suffix denotes standard I/O plus SynqNet motion network interface. Designed for plug-and-play commissioning with Kollmorgen AKM motors using Smart Feedback Device (SFD).

KOLLMORGEN S30301-NA-SB

Product Brief:​ The S300 is a compact, full-digital brushless servo drive designed for high-precision position, velocity, and torque control. It integrates an onboard motion controller capable of storing up to 300 motion tasks and supports electronic gearing, homing modes, and camming. Optimized for use with AKM, Goldline, and other permanent-magnet synchronous motors.

Kollmorgen MMC-SD-6.0-460-D

Product Introduction:​ The MMC Smart Drive family are compact, standalone digital AC servo/vector drives with onboard motion controller capability. The MMC-SD-6.0-460 delivers 6.0 kW continuous at 460 V AC input and is typically used with larger AKM5x/AKM6x motors or Goldline BH/MH series. The "–D" suffix commonly indicates DeviceNet communications or a specific I/O/feedback configuration in the MMC legacy range.

Kollmorgen SR03000-000000

Product Introduction:​ The SR series (sometimes referenced as part of Kollmorgen's intelligent drive lineage prior to AKD) provides microstepping control for 2-phase hybrid stepper motors, or in some contexts is a re-badged compact servo drive. The SR03000-000000 is a legacy part — modern equivalents are found in the Kollmorgen stepper drive (P5000 / P7000 series) or AKD with stepper mode. Some documentation lists it as a 3 A, 115/230 V AC input microstepping drive.

Kollmorgen B-204-B-24

Product Name:​ Goldline® B-Series Permanent Magnet Brushless Servo Motor, Frame B-204 (≈92 × 92 mm flange), Stack Length 4 (long), Winding B, with optional 24 V DC brake and/or built-in DC tachogenerator (suffix "-24" historically denotes 24 V brake or tach-related option in Goldline B legacy catalog)

Kollmorgen AKM51E-ACCNR-00

  • Product Name:​ AKM™ Series AC Synchronous Servo Motor, Frame AKM51 (Flange 100 mm × 100 mm / 115 mm OD), Stack Length 1 (short), Winding Type E (higher-speed / 240 V class), with resolver feedback, no brake, M23 connectors
  • Typical Parameters (AKM51E — 240 V AC / 320 V DC bus):
    • Continuous (Stall) Torque:​ ≈ 1.9–2.15 N·m (17–19 lb-in)

Kollmorgen AKM43K-ANSN2-02

  • Product Name:​ AKM™ Series AC Synchronous Servo Motor, Frame AKM43 (Flange 84 mm × 84 mm), Stack Length 3 (long), Winding Type K (high-torque / 480 V class), with resolver or optical encoder (AN = resolver or specific feedback per code), no brake, M23 connectors
  • Typical Parameters (AKM43K — 480 V / 640 V DC bus):
    • Continuous (Stall) Torque:​ ≈ 3.0–3.4 N·m (27–30 lb-in)

Kollmorgen AKM42E-ACC2AB00

  • Product Name:​ AKM™ Series AC Synchronous Servo Motor, Frame AKM42 (Flange 84 mm × 84 mm), Stack Length 2 (medium), Winding Type E (mid-voltage/high-speed), with resolver feedback, keyway shaft, no brake, M23 connectors
  • Typical Parameters (AKM42E — 320 V DC bus / 240 V AC winding):
    • Continuous (Stall) Torque:​ ≈ 1.14–1.27 N·m (10–11 lb-in) @ 100 °C ΔT

Kollmorgen AKM52K-SSS2S-06

  • Product Name:​ AKM™ Series AC Synchronous Servo Motor, Frame Size AKM52 (Flange 115 mm / 130 mm OD), Stack Length K (long), 480 V AC winding, resolver feedback, smooth shaft, no brake, M23 connector
  • Product Introduction:​ The AKM52 is a high-power-density permanent-magnet AC servo motor from Kollmorgen's AKM family. The "K" stack length gives the highest continuous torque in the AKM5 frame. "SSS2S-06" decodes approximately to: Standard (S) flange/IEC tolerance, Smooth shaft (S), Single resolver feedback (S), 2 = standard seal, S = no brake, -06 = 480 V winding / specific connector orientation.

Kollmorgen B-606-B-A9-B3-203

Product Introduction:​ The Goldline EB series are low-inertia, rare-earth magnet synchronous servo motors designed for high dynamic performance. The EB-606 frame is a mid-size NEMA 20 / IEC equivalent motor typically used with Kollmorgen ServoStar CD/S300/S600 drives. The suffix "-B" denotes stack length B (medium torque), and the option codes indicate resolver feedback, special connector/MS bayonet, and possibly a rear shaft or thermostat per customer specification.

Kollmorgen S60300-PB

Product Introduction:​ The S600 series is a fully digital single-axis servo drive designed to control synchronous (permanent magnet AC) and asynchronous (induction) servo motors. The S60300-PB variant includes a PROFIBUS DP interface for integration into Profibus-based automation networks. It is typically paired with Kollmorgen AKM, Goldline, or other 3-phase brushless servo motors.

Kollmorgen CR10260

Product Introduction:​ CR-prefixed parts in Kollmorgen's cable catalog are pre-manufactured interconnection cables for AKM servomotors — either power-only, feedback-only, or combo. CR10260 is a standard-length (verify from order — often 3 m / 6 m / 9 m selectable via suffix not shown here) shielded cable with Intercontec motor-side connector and drive-side flying leads or D-sub/M12 as applicable.