Kollmorgen

You are here:
  1. Home
  2. Kollmorgen
  3. Page 92

Kollmorgen MMC-DSA2

  • Product Name:​ MMC-DSA2 — Distributed Servo Amplifier / Motion Interface Module (part of Kollmorgen MMC-2 / DSA distributed architecture)
  • Product Introduction:​ The MMC-DSA2 is a distributed servo axis interface module used in Kollmorgen's MMC-2 (Modular Motion Controller) or standalone DSA networked motion systems. It provides axis control, I/O expansion, and communication between the host controller and BDS5 or SERVOSTAR amplifiers via fiber-optic or serial link.

Kollmorgen BDS5A-103-0101

  • Product Name:​ BDS5A-103-0101 PWM Digital Servo Drive (Brushless DC / AC Servo Amplifier)
  • Product Introduction:​ Kollmorgen BDS5 family digital servo amplifier — full-digital DSP-based drive for 1- or 3-phase brushless servo motors (Goldline B/M/BH/MH etc.). Provides torque, velocity, and position control modes; accepts ±10 V analog command, step/direction, or master-follower.

Kollmorgen B-406-A-A1

  • Product Name:​ Goldline B-406-A Brushless Servo Motor (Low Inertia, 230 VAC Class)
  • Product Introduction:​ Legacy Goldline B-series 3-phase PM brushless servo motor — low rotor inertia for high-acceleration point-to-point moves. Typically paired with Kollmorgen SERVOSTAR CD/S200/S300 or older BDS5 drives. Still widely used in legacy machine retrofits.

Kollmorgen AKM52H-ANCSEJ0

  • Product Name:​ AKM52H AC Synchronous Brushless Servo Motor with 24 VDC Holding Brake & Digital Encoder
  • Product Introduction:​ Mid-frame AKM5 (108 mm flange) servo motor with medium-inertia rotor, optimized for 640 VDC bus, equipped with high-resolution feedback (typically SFD or EnDat — "NCSEJ" variant indicates encoder + brake + keyed shaft + connectors). Suited for indexing tables, CNC axes, and converting equipment.

Kollmorgen AKM44S-SSC2R-0

  • Product Name:​ AKM44S AC Synchronous Brushless Servo Motor
  • Product Introduction:​ Part of Kollmorgen's AKM™ family — a compact, high-torque-density 3-phase permanent magnet synchronous servo motor designed for direct coupling to Kollmorgen AKD / S700 / SERVOSTAR drives in industrial automation, packaging, and robotics.

Kollmorgen AKD-B00607-NAAUS

Product Introduction:​
The AKD series are next-generation Ethernet-based servo drives offering plug-and-play commissioning with Kollmorgen AKM motors. The AKD-B00607-NAAUS is a 240/480 VAC 3-phase input, 6 A continuous (18 A peak), base drive with analog ±10 V command and no fieldbus option card (NA = none), US labeling. It includes an internal regenerative braking resistor.

Kollmorgen BDS5-210-00010-404B-2-020

Product Introduction:​
The BDS5 series are compact digital drives primarily for stepping motors but also capable of controlling brushless DC/AC servo motors in indexed or analog mode. The BDS5-210-00010-404B-2-020 is a 240 VAC input, 10 A peak drive with specific I/O and feedback configuration ("404B" = I/O config; "2-020" = firmware/cable option).

Kollmorgen S30661-NA-SB

Product Introduction:​
The S300 series is a compact digital servo drive for brushless AC servo motors. S30661-NA-SB indicates a 6 A continuous / 12 A peak drive with standard analog ±10 V command interface, no fieldbus option (NA = none), SB = specific firmware/hardware revision. Supports 1- or 3-phase 110–480 VAC input depending on model variant (S3066x typically 1×230 V or 3×208–480 V).

Kollmorgen B-202-C-23

Product Introduction:​
The Goldline B-Series are low-inertia, rare-earth magnet brushless servo motors designed for 230 VAC operation. The B-202-C-23 has a 20-frame (92×92 mm flange), stack length 2, winding type C, resolver feedback, open keyway shaft, rear shaft extension, Class H insulation, and built-in thermostat.

Kollmorgen S61401-SE/ATS-S61401-560

Product Introduction:​
The SERVOSTAR 600 series (predecessor to S700/AKD) is a digital servo amplifier supporting vector control of AC brushless servo motors. S61401-SE is the standard 14 A continuous version with RS232/analog command; ATS-S61401-560 is an ATS-configured or spare variant of the same drive.

Kollmorgen CB0655112

Product Introduction:​
CB-prefixed part numbers are Kollmorgen standard pre-assembled motor cables. CB0655112 typically denotes a 6.5 m (65-series length code) power or brake cable with specific pinout/connector for AKM servomotors—often a motor power + brake cable with circular metric connectors.

Kollmorgen CH041A-13-3305

Product Introduction:​
The Cartridge DDR is a frameless-style direct-drive rotary motor pre-assembled into a stainless-steel cartridge housing with bearings, rotor, stator, and high-resolution encoder—combining the compactness of frameless technology with the ease of installation of a housed motor. CH041A-13-3305 indicates a size-041 cartridge with specific winding (A), shaft seal, stack length, and EnDat or similar feedback.