Digital guide
You are here:
Kollmorgen EC2-T31T-15-05
Product Introduction:
The EC2 is Kollmorgen’s economy electric cylinder family. The “EC2-T31T-15-05” designation typically refers to a cable assembly or adapter kit for coupling a T31T NEMA-23 hybrid stepper motor to the EC2 actuator — 1.5 m motor power/encoder cable with 05-pin or specified connector style. In some catalogs this appears as a motor-to-cylinder adapter bracket + cable set.
Detailed content
Associated EC2 Actuator Data (for context):
-
Max Thrust: 3600 N (ball screw) / 1800 N (lead screw options)
-
Stroke Length: up to 750 mm
-
Screw Leads: 4 mm (lead), 16.5 mm (ball)
-
Motor Compatibility: T22T/T31T hybrid steppers, AKM23x servo motors (NEMA 23 mount)
-
Housing Material: 6063-T6 anodized aluminum tube; 6061-T6 cast aluminum end plates
-
Guide/Bearings: Angular-contact thrust bearings; carbon steel screw, bronze nut (lead) or heat-treated ball screw
-
Sealing: Optional protective boot; IP54 std / IP65 opt
-
Operating Temp: -30 … +70 °C
Cable/Kit Specs (typical for T31T-15-05):
-
Length: 1.5 m (≈ 05 ft implied by -15-05)
-
Conductors: 4 × motor phase + shield (stepper), possibly + Hall/encoder wires if feedback-equipped
-
Connector (Drive End): Phoenix/terminal or circular industrial style per Kollmorgen P-series
-
Connector (Motor End): MS-style or JST-HV per T31T motor
-
Jacket Material: Oil-resistant PVC or PUR for flex/fixed applications
Installation & Notes:
-
Route separately from AC power; use ferrites if EMI is a concern on long runs.
-
Verify connector keying matches T31T motor — mismatch can damage windings.
-
For full EC2 actuator assembly, confirm stroke length, screw type, and motor mount orientation before ordering.
