Product Series: S400 (Compact AC Servo Motor Family) Product Introduction: The S406AM-CA is a compact AC servo motor from Kollmorgen's S400 product line, designed for general-purpose motion control applications requiring high dynamic performance in a small footprint. It features an integrated absolute encoder and is compatible with Kollmorgen AKD, BDS, and AKM series servo drives.
Product Series: S77202 (AKD Drive Braking Resistor Assembly) Product Introduction: The S77202-NANANA is a braking resistor assembly designed for use with Kollmorgen AKD-series servo drives. It dissipates regenerative energy generated during motor deceleration, preventing DC bus overvoltage faults. The "NANANA" suffix indicates the standard / default configuration with no special options selected.
Product Series: S61400 (Encoder Housing & Accessories) Product Introduction: The S61400-PB is a rear-end protection cap (end bell cover) designed for Kollmorgen S-series absolute encoders. It protects the rear shaft-side bearing and encoder electronics from dust, moisture, and mechanical damage in harsh industrial environments.
Product Series: BH (High-Torque Frameless Brushless DC/AC Servo Motor) Product Introduction: The BH-828-E-43-B3 E1 is a high-performance frameless (hollow-shaft) brushless servo motor from Kollmorgen's BH product line. It is designed for direct-drive rotary applications where the motor is integrated directly into the mechanical structure, eliminating gears, belts, and couplings. This results in zero backlash, high stiffness, and superior dynamic response.
Product Series: CH (Cable Harness / Motor Lead Wire Assembly) Product Introduction: The CH092A-11-1105 is a pre-assembled motor power cable with connectors, specifically engineered for Kollmorgen servo motors. It provides a factory-terminated, tested, and shielded connection between the servo drive and the motor, ensuring signal integrity and compliance with EMC standards.
Product Series: BDS5A (Compact Digital Servo Drive Family) Product Introduction: The BDS5A-206-0001 is a compact single-axis digital servo drive manufactured by Kollmorgen, designed for cost-effective motion control in machine automation. It integrates a servo amplifier, motion controller, and I/O in a single housing, eliminating the need for a separate motion controller in many applications.
Product Introduction: The AKD-P01207-NBA is a single-axis digital servo drive from Kollmorgen's AKD-P product line, rated at 12 A continuous current and approximately 2 kW power output. The "NBA" configuration denotes a standard single-axis drive with CANopen communication, built-in braking chopper (no external resistor needed), 24 VDC logic, and support for all Kollmorgen servo motor feedback protocols. This drive is designed for small-to-medium servo motors requiring precise motion control.
Product Introduction: The DH083A-13-1210 is a frameless direct-drive torque motor from Kollmorgen's DH083A product line. The model code breakdown: "DH" = DirectDrive Hollow rotor, "083" = 83 mm outer diameter, "A" = Series A (standard performance), "13" = frame/stack variant 13, "1210" = 121 mm stack length. This motor features a hollow rotor with no shaft, no bearings, and no housing — it integrates directly into the customer's mechanical assembly.
Product Introduction: The AKD-P04807-NBS is a single-axis digital servo drive from Kollmorgen's AKD-P product line, rated at 48 A continuous current and 7 kW output. The "NBS" configuration denotes a standard single-axis drive with CANopen communication, built-in braking chopper and braking resistor (no external components required), 24 VDC logic, and support for all standard Kollmorgen servo motor feedback protocols. The internal braking resistor is rated at 1.5 kW continuous.
Product Introduction: The S70602-SENANA is a high-performance AC servo motor from Kollmorgen's S70 product family with a 60 mm frame size. The suffix breakdown: "60" = 60 mm frame, "02" = stack length code 02 (medium length), "SE" = single-turn absolute encoder, "NA" = no brake, "NA" = no keyway (smooth shaft). This motor delivers high torque in a compact package with absolute position feedback.
Product Introduction: The D101B-93-1210-014 is a frameless direct-drive torque motor from Kollmorgen's D101B product line. This motor features a hollow rotor design with no shaft, no bearings, and no housing — it mounts directly into the customer's mechanical structure. The model code breakdown: "D101B" = D101B series, "93" = 93 mm outer diameter, "1210" = 121 mm stack length, "014" = winding code (014 = highest torque variant in this frame).
Product Introduction: The AKI-CDT-MOD-10 is a pre-configured motor feedback and power cable assembly from Kollmorgen's AKI cable product line. The "CDT" designation indicates a cable with motor-side connector, drive-side connector, and integrated temperature sensor (thermistor). The "MOD-10" specifies a cable length of 10 meters. This cable is designed for connecting Kollmorgen servo motors to AKD/AKD-P/AKD2G servo drives.
