Kollmorgen

You are here:
  1. Home
  2. Kollmorgen
  3. Page 84

Kollmorgen S70362-NANANA

Product Description:​
This is a high-current variant of the S700 series. The "36" denotes 36 A RMS continuous output (some documentation lists S70362 as 36 A cont. / 72 A peak; S70302 = 30 A / 60 A — verify exact label). It shares all S700 platform features: EtherCAT/CANopen onboard, STO, multi-feedback, MMC slot, three option card slots (all "NA" = empty). Intended for large-frame servo motors or multi-motor regenerative systems.

Kollmorgen S70602-NANANA-NA

Product Description:​
The S70602-NANANA-NA is a high-performance digital single-axis servo drive from Kollmorgen's S700 series. It accepts 208–480 VAC 3-phase input and delivers 6 A RMS continuous / 18 A RMS peak output current. The "NANANA" suffix indicates no option cards installed in the three expansion slots—onboard EtherCAT and CANopen are standard. It is designed for complex motion tasks requiring high dynamic response, autotuning, and multi-feedback support.

Kollmorgen 65WKS-M310/22

Product Introduction:​
The 65WKS-M310/22 is a Kollmorgen S300 (SERVOSTAR 300) series digital servo amplifier, also marketed as SERVOSTAR 310. It is an earlier-generation drive preceding the AKD series but still widely used in legacy installations. "65WKS" is the Indramat/Kollmorgen legacy naming; "M310" = 310 model (10 A continuous), "/22" = firmware/option version.

Kollmorgen B-204-B-23

Product Introduction:​
The Kollmorgen "B-xxx-B-xx" numbering is characteristic of the legacy Goldline B-series frameless permanent magnet brushless motor kits. The B-204 is the frame size (diameter/stack length group); "-B-23" specifies winding configuration, magnet grade, and stack length variant. These are frameless kits​ — rotor (magnet ring + hub) and stator (wound laminations + leads) only — intended to be built into a machine's own structure (bearing set, housing provided by machine designer).

Kollmorgen SR03000-Y015

Product Introduction:​
In Kollmorgen legacy parts, "SR03000" refers to the SERVOSTAR 300 (S300) platform base drive. The suffix "-Y015" commonly denotes a cable set of 15 meters or a specific I/O/cable harness option. If it is the drive: it is a digital brushless servo amplifier, 3 A continuous (base SR03000), expandable with option cards. If it is a cable: it is the pre-assembled motor power + feedback shielded cable for AKM motors to S300 drives, 15 m length, with Intercontec/M23 connectors.

Kollmorgen B01207-NBA

Product Introduction & Notes:​
The "B" prefix in newer Kollmorgen listings often maps to the AKD-Bxxxx book drive chassis. "01207" matches AKD-x01207 (12 A, 240/480 V 3Ø). "NBA" likely specifies the mechanical/thermal option (book, natural cooling, standard I/O). If this is a bare drive chassis (no communication card fitted), it requires a plug-in communications module (EtherCAT, CANopen, etc.) to function. If interpreted as legacy SERVOSTAR "B" generation, it would be a 12 A, 480 V digital brushless servo amplifier — similar electrical ratings to AKD-B01207 but older generation (S300/S400 era).

Kollmorgen AKM21C-ANS2GB02

Product Introduction:​
The AKM21C is the smallest frame in the AKM lineup (Flange ≈ 42 mm). Winding "C" is typically a low-voltage or 120 V class winding suited for 48 VDC bus or 115/230 VAC with appropriate drive. The ANS2GB02 configuration typically means: AKM2 frame, winding C, S—feedback (often resolver or single-cable encoder), 2—smooth or keyed shaft with standard seal, G—no brake or specific connector config, B02—special paint/option code.

Kollmorgen AKM42G-ACCNDB00

Product Introduction:​
The AKM42G is a medium-frame synchronous servo motor from Kollmorgen's AKM series, optimized for high torque density and dynamic response. Winding "G" is a 240 V class winding. This specific suffix (ACCNDB00) typically indicates: Standard AKM4 flange, G winding, C—feedback (SFD Smart Feedback Device or incremental encoder depending on exact code), N—keyed shaft with standard seal, D—no holding brake (or brake omitted), B00—standard paint/connector (usually double M23 SpeedTec connectors, right-angle rotatable).

Kollmorgen AKD-P00607-NBE3

Product Introduction:​
The AKD-x00607 models are the 480 V three-phase variant of the AKD platform. AKD-P00607-NBE3 is rated 6 A continuous (18 A peak), designed for 187–528 VAC three-phase mains. The "-E3" suffix generally indicates EtherNet/IP or PROFINET RT (depending on regional coding; EtherCAT is typically -EC). This unit is used where higher supply voltage is available.

Kollmorgen AKD-B00306-NCS-B00

Product Introduction:​
The AKD-B00306-NCS is part of the AKD-Basic subfamily — a compact AKD drive with embedded BASIC programming capability, allowing simple stand-alone motion control without an external PLC. "NCS" indicates CANopen or Modbus TCP communication. Rated at 3 A continuous / 9 A peak.

Kollmorgen AKD-P00606-NCP

Product Introduction:​
AKD-P00606-NCP is a mid-range AKD drive with 6 A continuous output current, intended for 120/240 VAC single or three-phase supply. The "NCP" suffix typically designates CANopen (or optional Profibus DP) communication interface. It provides full position/velocity/torque control and is commonly paired with AKM2x/3x series motors in general automation.

Kollmorgen AKD-P01206-NBESF

Product Introduction:​
The AKD-P01206-NBESF is a high-performance Ethernet-based digital servo amplifier from Kollmorgen's AKD family. It is a position-indexer type drive designed for single- or multi-axis motion control systems requiring fast response, high bandwidth, and plug-and-play compatibility with AKM servomotors. The "NB" denotes a book-size form factor with natural convection cooling (no fan), suitable for clean-room or noise-sensitive environments. "ESF" indicates EtherCAT or SynqNet fieldbus communication support.