Digital guide
You are here:
Kollmorgen TTE-4501-3061-A-12
Product Introduction: Factory-molded, shielded feedback (encoder/resolver) cable assembly for connecting AKM-series servo motors to Kollmorgen S700/AKD/S600 drives. “TTE” prefix = Kollmorgen legacy cable part numbering; “3061” typically denotes connector style (motor-side M23 angled SpeedTec feedback plug, drive-side flying leads or micro-D depending on exact code); “A-12” commonly indicates 12-meter length or a specific pinout/option variant in older catalogs.
Detailed content
-
Construction & Materials:
-
Conductors: Tinned copper, individually twisted pairs for signal integrity
-
Shielding: Overall braided copper + AL-foil shield, drain wire terminated at drive end
-
Jacket: Oil-resistant PUR (polyurethane) or PVC (depending on exact sub-code), gray or black
-
Connectors: Motor side — M23 12-pin male angular connector (SpeedTec Ready, rotatable), overmolded; Drive side — flying leads or Mini-D-sub 15/26-pin per feedback type (resolver, incremental, EnDat, SFD)
-
Length: Typically 12 m implied by “-A-12” suffix in some legacy systems (confirm against project BOM)
-
-
Electrical:
-
Rated Voltage: 60 V (signal level)
-
Temperature Range: −40 °C to +80 °C (PUR version)
-
Bending Radius (fixed/flex): min. 7.5 × Ø / 10 × Ø respectively for flex-rated versions
-
-
Application: Used with AKM2x–AKM6x motors equipped with resolver (R-), incremental encoder (F-), SFD (C-), EnDat (D-), or Hiperface feedback. Match cable type code to motor feedback code.
-
Usage Notes: Do NOT coil excess cable tightly around motor or drive; keep feedback cable separated from power cables (≥ 30 cm or use metal partition). Shield must be 360° terminated at drive end ground point.
