Kollmorgen

You are here:
  1. Home
  2. Kollmorgen
  3. Page 33

Kollmorgen B-402-BD-99-TS-294

Product Name:​ GOLDLINE® B-402 Brushless Permanent-Magnet Servo Motor, Low-Inertia, NEMA/Metric Mount
Series:​ GOLDLINE B (legacy high-performance rare-earth magnet servo motors)
Decoded:​ B = Goldline B series; 402 = Frame size 40 (approx. NEMA 56–66 frame), stack length 2; BD = Winding/feedback config; 99 = Special modification code; TS-294 = Custom option/tag.

Kollmorgen S61000-PB

Product Name:​ SERVOSTAR 610 Digital Servo Drive / Servo Amplifier, 10 A Continuous
Series:​ S600 (predecessor to S700, fully digital PWM servo drive)
Model S61000-PB:​ 10 A RMS continuous, 20 A peak, 230–480 VAC 3-phase input, forced convection cooling (built-in fan), PB = standard I/O + resolver/encoder feedback.

Kollmorgen AKM33H-ACMNR-0

Product Description & Working Principle:​
A 3-phase permanent-magnet (NdFeB) synchronous AC servo motor with very low cogging torque. The rotor magnetic field interacts with stator windings energized by a servo drive to produce precise torque/speed. Rotor position is sensed by an integral resolver for commutation and closed-loop control.

Kollmorgen AKD-P02407-NBEr

Product Name:​ AKD™ Panel-Mount Servo Drive, Position Indexer Version with Internal Regenerative Resistor
Series:​ AKD (Next-Generation Ethernet-Based Servo Drives)
Part Number Meaning:​ P = Position Indexer (Motion Tasking); 024 = 24 A continuous; 07 = 3×400–480 VAC input; N = Standard I/O; B = Internal Brake/Regen Resistor; Er = EtherNet/IP capable variant.

Kollmorgen S70102-NANA

Product Introduction:​
Smallest member of the S700 family, intended for low-power servo axes. Same architecture and feature set as S70602 but derated to 1.5 A continuous. "NANA" = No fieldbus expansion card fitted (base analog/pulse+direction + RS-232), no extra safety card — STO is still onboard. MMC slot present for parameter storage.

Kollmorgen DBL3H00250QR2000S40

Product Introduction:​
The DBL series are rugged, high-performance brushless servo motors with smooth rotor surfaces and very low cogging. The DBL3 frame is a mid-size (approx. 130 mm flange). "H" denotes a winding optimized for 230/400 VAC (320 VDC bus typical), "00250" = 2.5 kW rated power, "Q" = resolver feedback (or resolver+encoder per option table), "R2000" = 2000 line encoder/feedback option, "S40" = SpeedTec M23 connector, IP65, with brake omitted (no -B suffix).

Kollmorgen EC2-T31T-15-05

Product Introduction:​
The EC2 is Kollmorgen's economy electric cylinder family. The "EC2-T31T-15-05" designation typically refers to a cable assembly or adapter kit for coupling a T31T NEMA-23 hybrid stepper motor to the EC2 actuator — 1.5 m motor power/encoder cable with 05-pin or specified connector style. In some catalogs this appears as a motor-to-cylinder adapter bracket + cable set.

Kollmorgen S70602-NAPMNA

Product Introduction:​
The S700 is Kollmorgen's high-performance digital servo drive for 1- or 3-phase 208–480 VAC supplies. It supports a wide range of feedbacks and fieldbuses, with advanced tuning, camming, and electronic gearing. The NAPMNA code = Standard, EtherCAT + CANopen onboard, no expansion card, MMC slot present, STO included.

Kollmorgen M-403-B-21-B3

Product Introduction:​
The Goldline M-Series are classic Kollmorgen brushless servo motors with rare-earth magnets, optimized for medium-inertia applications and compatibility with SERVOSTAR amplifiers. Frame size corresponds to NEMA 34 / IEC 80 mm class. The "-B-21-B3" suffix typically denotes winding code (B = specific voltage/torque constant), feedback (21 = encoder option), and connector/mount variant (B3 = MS connectors or flying leads, flange mount).

Kollmorgen S406AM-CAS

Product Introduction:​
Same S400 platform as S403AM but rated 6 Arms continuous / 12 A peak. "CAS" = CANopen fieldbus interface (DS301/DSP402 profile). Intended for use as an axis module sharing DC bus with a S400 Master.

Kollmorgen S403AM-SER

Product Introduction:​
The SERVOSTAR 400 (S400) family is a modular digital servo amplifier platform. The S403AM is a 3 A continuous / 6 A peak axis module for 160–310 VDC bus (from 1×115 VAC or 3×230 VAC input on a master module). "SER" indicates SERCOS fiber-optic ring interface. Axis modules share the DC bus with a master (S40xM).

Kollmorgen AKD-P01206-NBPUS

Product Introduction:​
The AKD series provides high-bandwidth digital servo control with plug-and-play auto-tuning when paired with AKM motors. The "-P" denotes position indexer (onboard motion tasks), "NB" = built-in regenerative braking resistor, "PUS" = EtherCAT + CANopen fieldbus + US power variant (120–240 VAC).