Kollmorgen

You are here:
  1. Home
  2. Kollmorgen
  3. Page 27

Kollmorgen AKM21C-ANS2GB02

Product Introduction:​
The AKM21C is the smallest frame in the AKM lineup (Flange ≈ 42 mm). Winding "C" is typically a low-voltage or 120 V class winding suited for 48 VDC bus or 115/230 VAC with appropriate drive. The ANS2GB02 configuration typically means: AKM2 frame, winding C, S—feedback (often resolver or single-cable encoder), 2—smooth or keyed shaft with standard seal, G—no brake or specific connector config, B02—special paint/option code.

Kollmorgen AKM42G-ACCNDB00

Product Introduction:​
The AKM42G is a medium-frame synchronous servo motor from Kollmorgen's AKM series, optimized for high torque density and dynamic response. Winding "G" is a 240 V class winding. This specific suffix (ACCNDB00) typically indicates: Standard AKM4 flange, G winding, C—feedback (SFD Smart Feedback Device or incremental encoder depending on exact code), N—keyed shaft with standard seal, D—no holding brake (or brake omitted), B00—standard paint/connector (usually double M23 SpeedTec connectors, right-angle rotatable).

Kollmorgen AKD-P00607-NBE3

Product Introduction:​
The AKD-x00607 models are the 480 V three-phase variant of the AKD platform. AKD-P00607-NBE3 is rated 6 A continuous (18 A peak), designed for 187–528 VAC three-phase mains. The "-E3" suffix generally indicates EtherNet/IP or PROFINET RT (depending on regional coding; EtherCAT is typically -EC). This unit is used where higher supply voltage is available.

Kollmorgen AKD-B00306-NCS-B00

Product Introduction:​
The AKD-B00306-NCS is part of the AKD-Basic subfamily — a compact AKD drive with embedded BASIC programming capability, allowing simple stand-alone motion control without an external PLC. "NCS" indicates CANopen or Modbus TCP communication. Rated at 3 A continuous / 9 A peak.

Kollmorgen AKD-P00606-NCP

Product Introduction:​
AKD-P00606-NCP is a mid-range AKD drive with 6 A continuous output current, intended for 120/240 VAC single or three-phase supply. The "NCP" suffix typically designates CANopen (or optional Profibus DP) communication interface. It provides full position/velocity/torque control and is commonly paired with AKM2x/3x series motors in general automation.

Kollmorgen AKD-P01206-NBESF

Product Introduction:​
The AKD-P01206-NBESF is a high-performance Ethernet-based digital servo amplifier from Kollmorgen's AKD family. It is a position-indexer type drive designed for single- or multi-axis motion control systems requiring fast response, high bandwidth, and plug-and-play compatibility with AKM servomotors. The "NB" denotes a book-size form factor with natural convection cooling (no fan), suitable for clean-room or noise-sensitive environments. "ESF" indicates EtherCAT or SynqNet fieldbus communication support.

Kollmorgen B-102-A-99-066

Product Name:​ Goldline B Series Size 102 Frame Brushless Servo Motor, A-winding
Introduction:​ Low-inertia, rare-earth magnet (NdFeB) permanent magnet synchronous motor for 230 VAC drive input. Intended for rapid acceleration/deceleration small-load applications.

Kollmorgen SR03000-2G104A

Product Name:​ SERVOSTAR SR03000 Digital Servo Amplifier / Spindle Drive (Legacy Goldline Era)
Product Introduction:​ Part of the discontinued SERVOSTAR SR family for controlling Goldline B/M/BH/MH series brushless servo motors. Provides torque, velocity, and position control with resolver or encoder feedback.

Kollmorgen AKD-B01207-NBA-AC

Product Introduction:​ Same hardware platform as AKD-P but with on-board BASIC runtime and KAS (Kollmorgen Automation Suite) compatibility—can execute multi-axis motion programs without a PLC/master.
Key Differences from AKD-P:​ Built-in program memory, multi-task execution, can operate as standalone motion controller.

Kollmorgen AKD-P00307-NBP-N-I000

Product Name:​ AKD™ High-Performance Digital Servo Drive, Position Indexer Version
Model Breakdown:
  • AKD:​ Platform
  • P:​ Position Indexer (onboard motion tasking / program storage)
  • 003:​ 3 Arms continuous output

Kollmorgen ME2-405-A-A2

Product Name:​ Kollmorgen ME-Series Pre-assembled Servo Motor Cable (Power + Feedback combined or separate per config)
Product Introduction:​ Factory-molded cable assembly for connecting AKM servo motors to AKD/S300/S700 drives. ME2 denotes motor-end connector type (M23 SpeedTec), 405 indicates length/configuration, A-A2 = power + feedback combo, specific pinout for AKM series.

Kollmorgen AKM65L-ACCNR-00

Product Name:​ AKM65L Brushless Permanent Magnet Synchronous Servo Motor
Product Introduction:​ Frame Size 6 (138×138 mm flange), stack length "L" (long), winding "C", resolver feedback, no holding brake, no shaft key (smooth shaft), standard IP54.