Kollmorgen

You are here:
  1. Home
  2. Kollmorgen
  3. Page 49

Kollmorgen MOTOREB-404-D-91-B3001

Product Introduction:
This is not a standard catalog motor but a legacy order/build tag from the EB-404 motor family (often associated with older Kollmorgen brush or brushless retrofit motors, compound code D-91-B3001 indicating winding, voltage and shaft modification). Commonly seen as spare-part reference for machine builders.

Kollmorgen AKM74L-ANC2DB0

Product Name:​ AKM7 Family High-Torque Brushless AC Servo Motor, Frame 188 mm, Stack 4, Winding L, EnDat Abs Encoder, 24 V Brake
Product Introduction:
Large AKM7 motor for heavy-axis machinery. 53 Nm stall torque, 640 VDC bus capability, single-turn absolute encoder, integrated 24 VDC fail-safe brake, rotatable M23 connectors.

Kollmorgen AKM13C-ANCNR-00

Product Name:​ AKM1 Family Brushless AC Servo Motor, Frame 40 mm, Stack 3, Winding C, Resolver
Product Introduction:
Compact AKM1 synchronous servo motor. Low-inertia rotor for high acceleration, smooth shaft, 2-pole resolver feedback, IP65 housing, M23 connector pigtails.

Kollmorgen AKD-B01207-NBS

Product Name:​ AKD Series Ethernet Servo Drive, 12 A, 240–480 VAC, Basic (no display), SFD
Product Introduction:
Next-generation AKD platform drive. 3-phase 240–480 VAC input, 12 A RMS continuous (30 A peak), built-in Ethernet stack, plug-and-play with AKM motors, no front display (Basic variant), SFD-capable.

Kollmorgen S30361-SE

Product Name:​ SERVOSTAR S300 Single-Axis Digital Servo Drive, 3 A, 110–230 VAC
Product Introduction:
Mid-power S300 digital drive for synchronous servo, asynchronous, and linear motors. 110–230 VAC single/three-phase input, 3 A continuous, optional STO (Safe Torque Off) depending on hardware revision.

Kollmorgen S60600-PB

Product Name:​ SERVOSTAR S600 Single-Axis Digital Servo Drive with PROFIBUS Card
Product Introduction:
Legacy S600-series amplifier (now serviced-only, not recommended for new designs). Three-phase 230–480 VAC direct line operation, 6 A RMS continuous per phase, factory-fitted PROFIBUS DP interface card.

Kollmorgen S30361-NA

Product Name:​ Kollmorgen SERVOSTAR 300 (S300) Digital Servo Drive, 3 A 240 VAC, No Option
Product Introduction:
The S30361-NA is the S300 entry drive: S3 = S300, 03 = 3 A continuous, 6 = 110–230 VAC, 1 = firmware gen, NA = no fieldbus/option card. It is the predecessor to AKD-P00306/01206 on 240 V.

Kollmorgen CR10250

Product Name:​ Kollmorgen CR-series Drive Option Module / Braking Resistor Kit
Introduction:
CR10250 appears in Kollmorgen docs as an S200/S300/AKD regeneration resistor kit or CAN/IO option card​ depending on assembly. Most commonly a dynamic braking resistor module​ for 240 V S200 class.

Kollmorgen CR03251

Product Name:​ Kollmorgen CR-series Feedback/Power Accessory (cable or option card)
Introduction:
Same family logic as CR033021. CR03251 is a Kollmorgen logistics-numbered accessory, predominantly a motor power/feedback hybrid cable​ or S200/S300 option card. Distributor records show CR03251 used as a resolver feedback cable for 6SM to S300 drive.

Kollmorgen AKD-P00307-NAE

Product Name:​ Kollmorgen AKD Servo Drive, 3 A 480 VAC Class, Analog Base, E Revision
Product Introduction:
The AKD-P00307-NAE is the 480 VAC three-phase version of the AKD base drive: 003 = 3 A continuous, 07 = 480 VAC (187–528 VAC), NAE = no fieldbus, E hardware revision. It delivers 2000 W continuous and pairs with AKM2/3/4 motors on 400 V machines.

Kollmorgen CR033021

Product Introduction:
The CR033021 is a Kollmorgen spare/option part from the CR parts list—typically a feedback breakout cable, resolver conversion cable, or drive option card used with S200/S300/AKD legacy systems. Exact identity depends on Kollmorgen order code: CR = Component/Resistor/Cable/Card prefix, 033021 = internal logistics number.

Kollmorgen AKM41H-EKMNEH00

Product Introduction:
The AKM41H-EKMNEH00 is an AKM4 frame (AKM41) motor, short stack, winding H (higher voltage/speed), E = EnDat feedback, K = specific connector/flange group, M = smooth shaft, N = no brake, E = EnDat absolute, H = connector orientation, 00 = base. It targets 480 VAC AKD/S700 drives.