Kollmorgen

You are here:
  1. Home
  2. Kollmorgen
  3. Page 58

Kollmorgen CE0655012

Product Type:​ Legacy full-digital servo amplifier (CD-series)
Product Introduction:​
CE0655012 is a ServoStar CD5 family drive (base code CE06550 with suffix 12). It predates AKD and was widely used with AKM, B-series, and Goldline motors. It supports 115/230 VAC single or 3-phase and delivers moderate continuous current.

Kollmorgen AKM41H-AND2GF00

Product Type:​ Brushless AC permanent-magnet rotary servo motor
Product Introduction:​
AKM41H-AND2GF00 decodes as: AKM4 frame (84 mm flange), stack 1 (short), H winding (high-speed/voltage class), A = standard flange/foot, N = SFD feedback, D = smooth shaft, 2 = no brake, G = Intercontec connector, F00 = standard sealing/length variant.

Kollmorgen P00606-NAE

Product Introduction:​
P00606-NAE is the option/suffix shorthand for AKD-P00606-NAE-xxxx. It is a compact single-axis drive rated 6 Arms continuous, 18 A peak, designed for AKM and other Kollmorgen brushless motors. “N” = 208–480 VAC 3-phase input, “A” = SFD/standard feedback, “E” = EtherCAT fieldbus.

Kollmorgen SR1000-2G204C

Product Type:​ Single-axis brushless servo amplifier
Product Introduction:​
SR1000-2G204C is a member of Kollmorgen’s older SR/S300/S600 servo drive lineage (commercialized before AKD took over mid-power slots). It provides closed-loop current, speed, and position control for synchronous AC servo motors such as AKM or Goldline.

Kollmorgen CR10550U1343D

Product Introduction:​
CR10550U1343D belongs to Kollmorgen’s 1G Performance cable family. It carries encoder/resolver feedback signals from an AKM servo motor to an AKD-series drive. The “CR” prefix identifies cable assemblies; “10550” denotes cable construction; “U1343D” is the length and connector variant code.

Kollmorgen CET002000003

Product Introduction:​
CET002000003 is a Kollmorgen internal configuration identifier used to define a co-engineered or customer-specific AKM motor build — including winding voltage, stack length, feedback device, shaft style, brake option, connector type, and sealing level. It maps to the AKM part-number scheme rather than a public off-the-shelf model.

Kollmorgen S60600-PBUS

  • Product Name: SERVOSTAR 606 (S600 Series) 6A Servo Drive with PROFIBUS-DP
  • Product Introduction: S60600 is the 6A continuous S600 drive; "-PBUS" explicitly indicates PROFIBUS-DP fieldbus interface card installed. It is a robust, proven drive for legacy PROFIBUS-based systems.

Kollmorgen AKD-T00306-ICA

  • Product Name: AKD Series Programmable (T = PDMM / BASIC-capable) 3A Drive with CANopen
  • Product Introduction: The "T" prefix often denotes AKD-PDMM (Programmable Drive with Motion Controller) or enhanced logic version. This 3A unit includes expanded I/O, SD card, and CANopen (ICA likely = CANopen interface). It can run IEC 61131-3or BASIC programs standalone.

Kollmorgen AKD-B01206-NBS-9-0000

  • Product Name: AKD Series Basic 12A Servo Drive with SynqNet / Option
  • Product Introduction: A 12 Arms continuous drive (B=basic, NB=natural cooling, S=SynqNet or specific bus option in some contexts, 9=option code, 0000=standard). It delivers 4000 W continuous and is used in medium-power multi-axis systems.

Kollmorgen AKM63L-ACC2EN00

  • Product Name: AKM6 Series Synchronous Servo Motor (Flange size 63)
  • Product Introduction: Part of the global-standard AKM family, offering high torque density, low cogging, and plug-and-play feedback with AKD drives. The "63L" indicates size 6, long stack; "ACC2EN00" defines connector, winding, brake, and encoder options (typically EnDat or similar absolute feedback).

Kollmorgen AKD-B00306-NAA-N-I000

  • Product Name: AKD Series Basic Servo Drive (No Bus, Standard I/O)
  • Product Introduction: The "B" denotes basic drive without built-in motion controller; "NAA" indicates no fieldbus, standard analog/Pulse-Dir control. It is a 3A drive for cost-sensitive single-axis applications.

Kollmorgen AKD-P00306-NCE

  • Product Name: AKD Series Position Indexer Servo Drive with EtherCAT
  • Product Introduction: A 3 Arms continuous output AKD drive configured as a position-type (P) with EtherCAT communication (CE denotes EtherCAT). It is optimized for multi-axis synchronized motion over real-time Ethernet.