Kollmorgen

You are here:
  1. Home
  2. Kollmorgen
  3. Page 89

Kollmorgen AKD-P01207-NBCUS

Product Introduction:
The AKD-P01207 is a high-voltage (480 VAC 3-phase) variant of the AKD platform. "P" = Position Indexer (built-in motion task table but no full PDMM programming), "NBC" = EtherCAT + CANopen communications, "US" = US-market labeling/certifications. This unit relies on an external motion controller or PLC via EtherCAT/CANopen for coordinated motion.

Kollmorgen AKD-M01206-MCEPDMM

Product Introduction:
The AKD-M01206 is a position-indexing AKD drive with "M" designation indicating integrated motion controller (Programmable Drive with Motion Master — PDMM capability). It can execute standalone motion programs via Kollmorgen Pipe Network or PLCopen motion blocks, and acts as EtherCAT master for multi-axis systems. The -MCEPDMM suffix denotes extended communication options (EtherCAT + Modbus TCP + CANopen) and PDMM functionality.

Kollmorgen AKM42E-ANCNC-N0

Product Introduction:
Compact yet powerful AKM4 frame motor with "E" winding, offering balanced torque/speed for medium-duty automation. The -NCNC-N0 suffix indicates standard digital feedback (SFD or EnDat-capable), no holding brake, standard smooth or keyed shaft.

Kollmorgen AKM65M-ANC2DA00

Product Introduction:
The AKM65M is a mid-to-large frame AKM servo motor with "M" winding (higher voltage/lower current), equipped with a digital smart feedback device (typically SFD, EnDat or incremental encoder per -NC2DA- configuration). Frame 65 offers significantly higher continuous torque than AKM3x/4x series.

Kollmorgen AKM31H-ASSS2-02

Product Introduction:
The AKM31H-ASSS2-02 belongs to Kollmorgen's AKM family of permanent-magnet synchronous servo motors. It features a size-31 (70×70 mm) IEC flange, "H" winding for high-speed operation, integral resolver feedback, and a smooth or light keyway shaft depending on sub-option. Designed for direct mating with AKD, S200/S300/S600 drive families.

Kollmorgen AKD-T00607-ICA

Product Introduction:
The AKD "T" version is a base drive similar to "P" but without built-in indexer (torque/velocity mode focus). T00607 denotes 6 A continuous, 240–480 VAC 3-phase input (480 V class). "ICA" typically references a specific interface card or regional/connector configuration in legacy ordering codes.

Kollmorgen S71201-S71201

Product Introduction:
The S700 (formerly Seidel S700) is Kollmorgen's compact high-performance digital servo drive family, positioned between the older BDS4 and the newer AKD. S71201-S71201 typically references a 240 VAC 3-phase S700 drive rated ~12 A, or in some catalogs an option/feedback interface card for the S700. The S700 offers advanced autotuning, notch filtering, and supports a wide range of feedback.

Kollmorgen P00606-NBP

Product Introduction:
Mid-range AKD drive with 6 A continuous / 18 A peak output, powered from 85–265 VAC single- or three-phase. "NBP" denotes base version with analog command capability and no built-in fieldbus card (option slot empty), standard I/O.

Kollmorgen M01206-MCEPDMM

Product Introduction:
The AKD PDMM (Programmable Drive with Motion Master) combines an AKD servo drive (same power stage as AKD-M01206) with an embedded KAS (Kollmorgen Automation Suite) motion controller running a real-time multitasking engine. It can control multiple axes over EtherCAT in addition to its own local axis.

Kollmorgen AKD-P01206-NAAN-00 00

Product Introduction:
This is an AKD "P" (position indexer capable) base drive, 12 A continuous output, supplied from 85–265 VAC single- or three-phase. NAAN indicates no built-in fieldbus card (analog/±10 V command, CANopen-ready option slot empty), no regenerative resistor, and standard I/O.

Kollmorgen CE03261-000000

Product Introduction:
CE-prefixed Kollmorgen part numbers typically designate cable sets or accessories. CE03261-000000 is a factory-coded cable assembly—most commonly a feedback (encoder/resolver) cable or hybrid motor/power cable for AKM / 6SM series motors. Exact pinout and length must be cross-checked against the original machine documentation.

Kollmorgen BDS4-206J-202C

Product Introduction:
The BDS4 (Brushless Digital Servo) amplifier is an earlier-generation Kollmorgen digital servo drive for 2- or 3-phase brushless servo motors. The BDS4-206J-202C is a 6 A continuous (≈12 A peak) model with specific I/O configuration (J = I/O option, 202C = firmware/hardware revision). This product line has been discontinued and replaced by AKD or S300/S700 series.