Kollmorgen

You are here:
  1. Home
  2. Kollmorgen
  3. Page 100

Kollmorgen S30361-NA-ARM9

Product Brief:​ Digitally controlled 3-phase PWM servo amplifier providing torque, velocity, and position control loops. S30361 = 230/400 VAC 3Φ input, 6 A continuous / 12 A peak. "NA" = No optional fieldbus card (bare analog/step-dir interface); "ARM9" reference on label indicates ARM9-based processor platform (S300 uses 32-bit RISC CPU). Interfaces via ±10 V analog command, step/direction, or master encoder follow. Supports resolver, incremental encoder, EnDat, BiSS via appropriate feedback card.

Kollmorgen AKD1207-NBCC-0

Product Brief:​ High-performance single-axis Ethernet-ready servo amplifier for PMSM, asynchronous AC, linear, and DC brush motors. "1207" = 7 Arms continuous / 14 A peak @ 480 V class (or 12 A peak @ 240 V — check firmware rev; typical 1207 = 7 A cont / 14 A pk). "N" = no extra option card (CANopen module in fieldbus slot). "B" = CANopen (CiA 301 / DS402 profile)​ pre-installed. "C" = Standard I/O. "C" again per some codings = Std I/O confirmed; "-0" = no additional accessories. No "S" = No Safe Torque Off (STO).

Kollmorgen CB10560

Product Series:​ Kollmorgen SERVOSTAR CD Family​ — 230 VAC Class
Product Brief:​ Compact digital brushless servo drive for 3-phase PMSM/BLDC motors. CD10560 variant provides 5 A continuous / 10 A peak​ output from 208–230 VAC 3Φ input. Features SERCOS interface option or analog ±10 V / step-dir control depending on interface card fitted. CB10560 in OEM lists typically references the CD10560 drive itself (catalog cross-reference: CB = Configured Build of CD platform).

Kollmorgen B-206-B-22-S-2

Product Brief:​ Same architecture as B-204-C-21 but with B-winding​ (lower torque constant / higher speed capability) and suffix "-S-2" indicating smooth shaft (no keyway) and special sealing / connector arrangement per Kollmorgen Goldline option coding. Frame 20 (≈ 89 mm flange). Intended for applications needing higher RPM at moderate torque. Compatible with SERVOSTAR S300/S600/S700 and AKD (120/240 V models for B-winding).

Kollmorgen N41HCLM-LNK-NS-01

Product Brief:​ 2-phase (or 4-phase bifilar) hybrid stepping motor with 1.8° full-step angle (200 steps/rev). NEMA 42 (4.325 in × 4.325 in) flange, heavy-duty construction with Class B insulation, premium "M" winding for maximized torque. Factory-fitted with MS circular connector and 8 flying leads (for unipolar/bipolar series/parallel configurations). Shaft with keyway and shaft seal. Compatible with Kollmorgen stepper drives (7200/PD-xxx series) and 3rd-party microstepping drives.

Kollmorgen CR10561

Product Brief:​ Factory-molded shielded cable with motor-side circular connector (Intercontec / M23 style) and drive-side flying leads or mating connector for Kollmorgen SERVOSTAR S300/S600/S700 or early AKD drives. CR-prefix cables are legacy configured assemblies — CR10561 typically denotes a specific length/pinout for Goldline B/M/H series motor power + resolver/encoder feedback (dual-cable style — power separate from feedback, or combo depending on exact sub-code). Some references list CR10561 as a resolver feedback cable​ for Goldline B-series motors.

Kollmorgen B-204-C-21

Product Brief:​ 3-phase interior permanent magnet (IPM/NdFeB) synchronous servo motor offering high torque density and low cogging for dynamic point-to-point motion. Frame "20" = 20-size (flange ≈ 89 mm / 3.5 in square — NEMA 34 mounting pattern). "C" = winding code (medium torque/speed for 230 V bus). Supplied with integral resolver or encoder (factory-fitted — verify from nameplate). Compatible with SERVOSTAR S300/S600/S700 and AKD drives.

Kollmorgen CB10661-MZ

Product Series:​ Kollmorgen SERVOSTAR CD​ (Compact Drive) Family — 230 VAC Class
Product Brief:​ Digitally controlled 3-phase PWM servo amplifier for brushless (BLDC/PMSM) and brushed DC servo motors. Designed for stand-alone or multi-axis machine control with SERCOS optical fiber interface for deterministic real-time communication with a motion controller. CB10661-MZ is a 230 VAC input, medium-current variant of the CD series.

Kollmorgen 60WKS-CE240/12 PB

Product Brief:​ Compact rare-earth PMSM servo motor, frame 60 × 60 mm flange, with "CE240" winding (voltage/torque constant optimized for 240 VAC / 320 VDC bus). "/12" refers to feedback — Resolver (typically 12-pole or 1-pole 2-track — in AKM naming PB = resolver, smooth or keyed shaft, IP65). "PB" = Resolver feedback + keyed shaft + IP65 seals + standard connector. Exact AKM base model would be e.g. AKM61x-xxxxxxx per full part number — 60WKS-CE240/12PB is the abbreviated OEM/panel spec notation.

Kollmorgen SM-56S-3.000

Product Brief:​ Compact 3-phase PMSM servo motor, frame 56 × 56 mm flange. "S" = winding code (low-to-mid torque, higher speed capability). "3.000" = 3000 rpm rated speed. No suffix letter = No holding brake. Designed for moderate torque / high dynamic response axes — typical in smaller packaging, pick-place, or auxiliary machine axes. Compatible with Kollmorgen S300/S700 (240 V models) and AKD (120/240 V models with correct auto-tune).

Kollmorgen 6SM77K-3.000-G

Product Brief:​ 3-phase sinusoidally wound PMSM servo motor with high-energy NdFeB magnets, optimized for dynamic response and low cogging. Frame 77 × 77 mm flange. "K" winding = medium-torque, medium-speed winding. "3.000" = 3000 rpm rated speed. "-G" suffix = Equipped with 24 VDC spring-applied electromagnetic holding brake. Compatible with Kollmorgen SERVOSTAR / S700 / AKD (480 V models) and legacy BDS4/6 drives with correct current/tuning.

Kollmorgen BDS4A-240J-000

Product Brief:​ Compact Eurocard-format 4-quadrant PWM servo amplifier for 3-phase brushless (BLDC/PMSM) motors with sinusoidal or trapezoidal commutation. Accepts ±10 V torque/speed command and resolver or Hall-based commutation feedback. Intended for standalone or rack-mount use in legacy machine tools and special machinery. "240" = 240 VAC 1Φ/3Φ input (typ. 208–240 VAC 3Φ). "J" = Specific I/O & enable configuration (Enable HI, ±10 V command, tacho/encoder follower options — exact J-pinout per BDS4 manual). "-000" = No brake option card / standard unit.