Kollmorgen

You are here:
  1. Home
  2. Kollmorgen
  3. Page 23

Kollmorgen B-204-C-99-S-2-46

Product Introduction:​ Kollmorgen "B" series frameless brushless motor kits (historically Goldline® BLM / ULT/ULT-true frameless). B-204 = frame size 204 (approx. bore & OD per Kollmorgen frameless dimension tables — typically ~200 mm outer diameter, ~70–100 mm ID depending on exact series). "C" = stator/rotor pair; "99" = custom winding/specification; "S" = shaft/hub config or special; "2-46" = stack length or magnet config. These are component-level kits, not housed motors.

Kollmorgen CR03260

Product Introduction:​ Kollmorgen "CR" prefixed part numbers typically denote pre-assembled cable sets or accessories. CR03260 is commonly a motor interconnect cable​ (power + feedback combined or separate) for AKM series servo motors — M23 angled male to drive-end or junction box, specified length and pinout. Exact pinout depends on motor feedback type (encoder vs resolver vs SFD).

Kollmorgen AKM31H-ANCN2-00

Product Introduction:​ AKM31 is a compact 70×70 mm flange (IEC size) permanent-magnet synchronous brushless servo motor. "H" winding = medium voltage/high speed. "ANCN2-00" decode: A-side standard flange, smooth (no key) shaft, N-side standard tolerance, C = incremental encoder (Hall-effect ComCoder, 2048 pulses/rev), N = no holding brake, 2 = connector orientation (angled M23), 00 = standard.

Kollmorgen LPS PA-LM

Product Introduction:​ Kollmorgen LPS (Linear Positioning System) family — a complete integrated linear stage combining iron-core or slotless linear motor, precision guide rails (typically recirculating or air bearing depending on sub-model), and linear encoder feedback. "PA-LM" commonly refers to a Linear Module Actuator with integrated feedback pre-mounted.

Kollmorgen 64WKS-M240/70-RLG

Product Introduction:​ Legacy (now obsolete/discontinued) Seidel-series brushless DC/AC servo amplifier in double Eurocard format. Designed for 3-phase supply 60–172 VAC, output stage PWM transistor inverter, controlled by motor's electronic rotor position sensor (resolver or Hall — "RLG" variant). Can be paralleled (up to 3 units, one master).

Kollmorgen AKD-P01207-NBP12

Product Name:​ AKD Series Servo Drive — 480 VAC 3Ø, 12 A Continuous, 24 VDC External 12 V Option (or NBP = No Brake / Special I/O)
  • Product Introduction:​ AKD platform for 240/480 VAC 3-phase input, 12 Arms continuous, 30 Arms peak. The "-NBP12" suffix typically indicates 480 V 3Ø, no integral brake control or special I/O config, possibly 12 V auxiliary option. Follows AKD-x01207 electrical ratings.

Kollmorgen P01206-NAC

Product Introduction:​ This is an AKD-P01206 base platform (12 A continuous, 2400/4000 W class on 120/240 VAC) with a legacy or regional option code "NAC" — generally interpreted as 120/240 VAC 1Ø/3Ø input, analog command, no fieldbus interface, standard I/O. Functionally equivalent to AKD-P01206-NBxx variants for basic analog-controlled systems.

Kollmorgen AKD-T00307-NBA

Product Introduction:​ AKD drive variant for 240/480 VAC three-phase supply. The "T" in some legacy AKD coding can indicate a specific I/O or communications subset; "-NBA" typically = 480 V 3Ø input, analog ±10 V / pulse & direction command inputs, no built-in fieldbus master, standard I/O. Continuous rating follows AKD-x00307.

Kollmorgen AKD-P00606-NBSUS

Product Introduction:​ Part of the Kollmorgen AKD® high-performance digital servo drive family. Designed for plug-and-play commissioning with AKM™ brushless servo motors. The "-NBSUS" suffix typically denotes 120/240 VAC 1Ø/3Ø input, no built-in regenerative resistor, Sine/Cosine or Smart Feedback Device (SFD) support, USB service port, and standard industrial I/O.

Kollmorgen S403AM-SE

Product Description:​ The S400 (S300/S400) family is Kollmorgen's previous-generation high-performance digital servo drive. "S403" = 3 A continuous, 400 V class (3-phase 208–480 VAC input). "AM" = specific I/O & feedback connector config. "SE" = SERCOS interface (fiber-optic ring) for real-time multi-axis motion.

Kollmorgen AKD-B00606-NCA

Product Description:​ "B" = Base drive version​ — no built-in fieldbus master; controlled via ±10 V analog command, step/direction, or internal programming. Intended for standalone or retrofit applications replacing older analog drives. "NCA" = standard I/O, no STO module, specific connector layout.

Kollmorgen AKD-P00606-NCC

Product Description:​ The AKD-P family are high-performance, Ethernet-based digital servo amplifiers. The "P" denotes EtherCAT® motion bus​ as primary network interface. "00606" = 6 A continuous / 18 A peak / ~2 kW @ 240 VAC. "NCC" = no regenerative resistor, standard I/O, CAN/EtherCAT option populated, no Safe Torque Off (STO) in base, specific connector/config variant.