Kollmorgen

You are here:
  1. Home
  2. Kollmorgen
  3. Page 83

Kollmorgen B-202-A-23 & B-404-C-21

Product Name:​ Kollmorgen Goldline® B-202-A-23 Low-Inertia Permanent Magnet Synchronous Servo Motor — Frame Size 20, Stack 2, Winding A, Resolver, Keyed Shaft
Specifications:
  • Frame Size:​ B-20 (≈92 × 92 mm flange, NEMA 34 equivalent)

Kollmorgen AKM65K-ANCNR-00

Product Introduction:​
The AKM65 is one of the largest standard AKM frames (135 mm square flange), intended for high-power machine tool, converting, and heavy automation applications. "K" stack is a long laminate giving high continuous torque. "ANCNR-00" = Standard configuration, N=Std seal (IP65), C=Resolver feedback, N=No brake, R=Right-angle or standard connector orientation, 00=default shaft (smooth / plain).

Kollmorgen AKM21C-ANS2GB03

Product Introduction:​
The AKM™ series offers standardized NEMA/metric flange mounting, low-cogging magnet designs, Class F (155 °C) insulation, and a wide selection of windings for global voltages. The AKM21 frame is a small-inertia motor; "C" stack length gives medium continuous torque for the frame. "ANS2GB03" decodes approximately to: A=Standard, N=No seal upgrade (IP65 std), S=SFD (Smart Feedback Device — electronic motor nameplate), 2=Connector orientation, G=24 VDC spring-applied fail-safe brake, B03=Smooth shaft with keyway variant / specific winding code.

Kollmorgen AKD-P00307-NBP

Product Introduction:​
This is a standard AKD drive (non-BASIC) in the 480 VAC family, 3 A continuous / 9 A peak. The trailing "P" in the suffix typically designates a specific fieldbus option (commonly PROFIBUS DP-V1 or CANopen depending on regional coding; verify against Kollmorgen ordering guide). Functionally identical to AKD-P00307-NBC except for the network interface.

Kollmorgen AKD-B00307-NBA

Product Introduction:​
AKD BASIC drives incorporate an onboard interpreted BASIC language engine allowing stand-alone motion programs to be stored and executed without a separate motion controller. The "B" prefix = BASIC version; "00307" = 3 A continuous / 9 A peak, 240/480 VAC 3-phase (187–528 VAC); "NBA" suffix = standard I/O, no special options, EtherCAT disabled — typically Modbus/TCP or standalone serial control with local program execution.

Kollmorgen AKD-P02406-NBC

Product Introduction:​
The AKD® series is Kollmorgen's next-generation high-performance digital servo drive. The "-P" denotes 120/240 VAC 3-phase (85–265 VAC line-to-line) supply. The "02406" indicates 24 A RMS continuous / 48 A peak output. "NBC" = No brake chopper (standard), B = base hardware platform, C = EtherCAT® fieldbus. It is designed for demanding indexing, electronic cam, and synchronized multi-axis motion.

Kollmorgen S61401-PB

Product Introduction:​
These are S200-series single-axis servo amplifiers configured with the "PB" (Panel Bus / Proprietary Kollmorgen bus) communication option rather than SynqNet. They share the same digital architecture, current-loop performance, and feedback capabilities as the S20660-SRS but are intended for standalone or legacy Kollmorgen multiaxis systems using the Panel Bus interface.

Kollmorgen S20660-SRS

Product Introduction:​
The S200 series is Kollmorgen's first fully digital industrial servo drive family featuring an 800 Hz velocity loop bandwidth. The S20660-SRS is a compact single-axis drive rated 6 A RMS continuous / 18 A RMS peak, equipped with a SynqNet motion bus interface for distributed multi-axis control. It supports plug-and-play commissioning via the electronic motor nameplate (Smart Feedback Device) and is intended for precision indexing, packaging, semiconductor, and machine tool applications.

Kollmorgen P01206-NBE-MX4

Product Introduction:​ "P01206" references the 12 A AKD drive model; this cable assembly is the associated power cable for AKM motors driven by AKD-x01206. "NBE" = No Brake Leads Eliminated (or separate brake cable used); "MX4" = specific length/variant code in Kollmorgen ordering system (often 4 m implied by MX4 in some legacy code sets — confirm length from project docs).

Kollmorgen B-104-B-14-B3

Product Introduction:​ Legacy Kollmorgen Goldline® B-series rare-earth magnet (SmCo) brush-type DC servo motor, widely used with older ServoStar CD/S-series drives or 3rd-party DC amplifiers. "B-104" = B-frame size 104 (≈ 104 mm / 4.1″ OD), "B" winding, "14" = specific armature voltage/torque constant variant, "-B3" = standard NEMA 56C face with shaft key, with factory-installed tachogenerator and thermal switch.

Kollmorgen AKM42E-ACC2AB00

Product Introduction:​ Compact, medium-inertia permanent-magnet synchronous servo motor. Winding "E" provides balanced speed/torque — suited to 3000–4000 rpm applications. "ACC2AB00" typically = Standard AKM42 flange, E winding, resolver, no brake, standard shaft/connector configuration.

Kollmorgen AKM54H-ACCNR-00

Product Introduction:​ High-torque-density, low-cogging brushless servo motor from Kollmorgen AKM family. Designed for plug-and-play with S700/AKD drives via electronic nameplate auto-configuration. "ACCNR" decode: A=Standard flange(IEC72-1), C=Winding code H (medium speed/high torque), C=Resolver feedback, N=No holding brake, R=Keyway shaft, 00=Standard options.