Digital guide
You are here:
Kollmorgen P01206-NBE-MX4
Product Introduction: “P01206” references the 12 A AKD drive model; this cable assembly is the associated power cable for AKM motors driven by AKD-x01206. “NBE” = No Brake Leads Eliminated (or separate brake cable used); “MX4” = specific length/variant code in Kollmorgen ordering system (often 4 m implied by MX4 in some legacy code sets — confirm length from project docs).
Detailed content
-
Construction & Materials:
-
Conductors: 4 × color-coded copper (U/V/W + PE), cross-section matched to 12 A continuous (typically 2.5 mm² or 14 AWG for ≤15 m runs)
-
Shield: Tinned copper braid + foil overall shield, 360° terminated at drive end
-
Jacket: Oil-resistant, flame-retardant PUR (halogen-free optional), gray
-
Motor Connector: M23 4+PE pin male angular connector (SpeedTec Ready, rotatable 4×90°), overmolded
-
Drive End: Flying leads (tinned copper, stripped & ferruled) or fork terminals for AKD power terminal block (X1/X2 depending on model)
-
Temperature Range: −40 °C to +80 °C (flex-grade PUR)
-
Bending Radius (static/flex): ≥ 5 × Ø / ≥ 10 × Ø
-
-
Rated Voltage: 600 V (power)
-
Compatible Motors: AKM2x, AKM4x, AKM5x up to 12 A continuous rating
-
Usage Notes: If motor has holding brake, order separate brake cable (typically same series with “B” in code). Keep power cable separated from feedback cable. Shield must be connected to protective earth at drive cabinet ground bar. Do not exceed recommended cable length for drive regeneration energy considerations (check with WorkBench if >25 m).
