Kollmorgen

You are here:
  1. Home
  2. Kollmorgen
  3. Page 95

Kollmorgen CE1025112

Product Brief:​ CE10251 belongs to the SERVOSTAR CD2 family — compact single-axis digital servo amplifier for brushless AC servo motors. "CE" = 230 VAC input version (vs CR = 400 VAC); 10 = 10 A continuous rating; 251 = firmware/config variant. CE1025112 appears to be a sub-suffix/variant label. These drives preceded the S700/AKD generations but remain in many legacy systems.

Kollmorgen S70301-NA

Product Name:​ S700 Compact High-Performance Digital Servo Drive (S70301-NA)
Product Brief:​ Part of Kollmorgen S700 family — fully digital PWM servo amplifier for rotary and linear brushless servo motors, with Safe Torque Off (STO), expandable I/O and fieldbus options. "NA" denotes North America region / standard configuration (typically with CANopen/Ethernet-ready base + expansion slots).

Kollmorgen AKD-P00306-NCP

Product Name:​ AKD® PWM Servo Drive – Position Indexer, 120/240 VAC, 3 A
Product Brief:​ AKD-P00306 = single/three-phase 120/240 VAC input (85–265 VAC), 3 A continuous / 9 A peak, N = No Regen Resistor, C = CANopen fieldbus, P = Position Indexer firmware.

Kollmorgen MOTOREB-102-A-11-B2

Product Name:​ Goldline® EB-102-A-11-B2 Explosion-Proof Brushless Servo Motor
Product Brief:​ EB-102 = smallest EB frame (Size 1), A = winding code (typically 230 VAC, lowest torque in EB family), -11 = resolver + standard mount, -B2 = special shaft / connector / seal variant (manufacturer custom).

Kollmorgen EB-404-C-11

Product Name:​ Goldline® EB-404-C-11 Explosion-Proof Brushless Servo Motor
Product Brief:​ EB = explosion-proof version of Goldline B series (NEMA Class I Div 1 Groups C & D), 404 = frame size 4 stack 4, C = winding code (230 VAC), -11 = resolver + standard metric mount. Certified for hazardous locations.

Kollmorgen B-402-B-23

Product Brief:​ B = Goldline B series (low inertia, 230 VAC windings), 402 = frame size 4, stack length 2, B = winding code B (230 VAC line-to-line), -23 = resolver feedback + metric mount + rear shaft extension (typical interpretation). Designed for rapid acceleration/deceleration with SERVOSTAR amplifiers.

Kollmorgen AKM54L-CSSNR-02

Product Name:​ AKM54L-CSSNR-02 Permanent Magnet Synchronous Servo Motor
Product Brief:​ Size 54 (frame 54 = approx. 92 mm square flange, L = long stack), smooth shaft (S), standard sealing (S), no brake (N), resolver feedback (R), metric connector (02). Optimized for pairing with AKD-series drives.

Kollmorgen 57S-3.000-G0

Product Brief:​ "57S" denotes a NEMA 23 (57 mm square flange) size step/servo motor; "3.000" typically indicates 3.0 in-lb (≈0.34 Nm) rated holding torque or winding variant; "G0" = standard stack length / no brake / standard connector. Often used as a high-performance hybrid stepper or slotless BLDC in OEM machines.

Kollmorgen AKD-P00607-NBEby

Product Name:​ AKD® PWM Servo Drive – Position Indexer / Ethernet/IP Version
Product Brief:​ High-performance Ethernet-based servo drive from the AKD family, 3-phase 240/480 VAC input, 6 A continuous / 18 A peak, with built-in motion indexing (P = Position Indexer), N = No Regenerative Resistor (or internal depending on suffix), B = EtherNet/IP fieldbus, E = 24 VDC logic, y = regional/custom variant.

Kollmorgen digiFAS 7202-SPS

Product Name:​ digiFAS 7202-SPS Servo Amplifier / Programmable Spindle Drive
Product Brief:​ Part of Kollmorgen's Digifas 7000 series, a compact digital servo amplifier designed for torque and speed control of 6SM series synchronous servo motors. Supports PLC interface and motor holding brake control.

Kollmorgen AKD-P00607-NBEC-0091

Product Description:​
Entry-level current rating AKD for 400 V class systems. "007" = 480 V family; "06" = 6 A continuous; "NBE" = North America, EtherCAT motion bus; "C" = with Safe Torque Off (STO) per IEC 61800-5-2; "-0091" = specific firmware/option revision. Ideal for small to medium AKM3x / AKM4x (short stack) motors.

Kollmorgen AKM41H-AN92GF00

Product Description:​
Compact AKM size 41 motor with higher-current winding (H) for 120/240 V drive compatibility. "A" = frame 41 stack 1; "H" = winding H; "N92G" = feedback type (typically Hiperface DSL or incremental sine/cos with commutation tracks); "F" = with brake; "00" = standard metric mount, keyed shaft.