Kollmorgen

You are here:
  1. Home
  2. Kollmorgen
  3. Page 99

Kollmorgen MMC-SD-0.5-230-D

Product Brief:​ A DIN-rail mounted motor protection/monitoring module designed to work with Kollmorgen servo motors equipped with PTC or KTY thermal sensors, or as a standalone overload monitor for induction motors with thermal sensors. "SD" = Solid State / Monitoring type; "0.5" = settable current or sensor trip range reference (0.5 A base or PTC trip threshold reference); "230" = 230 VAC control supply; "D" = DIN rail housing with screw terminals. Provides relay contact output for machine shutdown on overtemperature or parameter violation. In many Kollmorgen legacy systems this was used alongside BDS4/SERVOSTAR to monitor PTC strings.

Kollmorgen S70102-NANANAA

Product Brief:​ Digitally controlled 3-phase PWM servo amplifier for brushless PMSM, asynchronous AC, DC brush motors. S70102 = 120/230 VAC input, 1.5 Arms continuous / 4.5 Arms peak​ (S70102 = smallest S700 frame). "NANANAA" = N(Std I/O), A(No bus card — analog ±10 V, Step/Dir, Encoder Follow, Modbus TCP via Ethernet port), N(Multi-feedback card — resolver/encoder/EnDat/BiSS/Hiperface), A(Std I/O confirm), A(No STO/Std). Features onboard web server for commissioning, autotuning, and electronic gearing/camming (with option). Compatible with AKM1x–AKM3x small-to-mid motors.

Kollmorgen M205-C21-259

Product Brief:​ The M205-C21-259 is a legacy configured part number for a Kollmorgen M200 Series direct-drive rotary table or frameless motor kit​ with a 205 mm outer diameter stator/rotor set, C21 = winding/stack option, 259 = special modification/feedback/bearing option. These are torque-motor-based rotary positioners providing zero-backlash direct coupling to the load. Modern equivalents are the Kollmorgen RBE / RMB / DD (Direct Drive Rotary)​ series.

Kollmorgen AKM11B-ANCNR-0

Product Series:​ Kollmorgen AKM®​ Series — AC Brushless Servo Motors
Product Brief:​ Compact 3-phase PMSM servo motor, frame 11 (55 × 55 mm IEC flange — NEMA 23 equivalent), B-winding = shortest stack for AKM11 (continuous stall torque ~0.16–0.21 Nm). Factory-fitted with 2-pole resolver ("C" in ANCNR-0 = resolver, N = smooth shaft, R = standard IP65 seals/connector), smooth shaft (no keyway), no holding brake. Compatible with AKD and S700 drives — auto motor ID via M23 connector resistors.

Kollmorgen CB06261

Product Brief:​ Factory-molded shielded power cable with motor-side circular connector (Intercontec M23) and drive-side flying leads or terminal-block plug for Kollmorgen SERVOSTAR S300/S600/S700 or AKD drives. CB06261 typically denotes a motor power cable (with or without brake leads) for small-to-mid frame Goldline B/M-series or AKM2x–AKM4x motors (≤ 6 A class, 3 m length typical — "06261" encodes length and pinout). For AKM motors the equivalent modern part is CE-prefix (e.g., CE06261 = AKM power cable 3 m). CB06261 = legacy Goldline/early AKM power cable.

Kollmorgen B-404S-C-93-B3-072

Product Brief:​ B-404S indicates frame 40, S = special stack variant; "-C-" = C-winding (higher torque constant than B-winding, lower max speed — typical continuous stall torque for B-404C ~5.5–6.5 Nm). "93" = keyed shaft + standard seals; "B3" = circular connector + shaft seal; "-072" = special lamination stack length 72 mm​ (non-standard — standard stacks are typically ~50/65/80 mm for B-40x; 072 is a custom length altering inertia and torque proportionally). Factory-fitted with 2-pole resolver. Compatible with SERVOSTAR S300/S600/S700 and AKD (120/240 V models for C-winding).

Kollmorgen B-402-B-A1-B2

Product Series:​ Kollmorgen Goldline B Series​ (Low-Inertia, 230 VAC Line Voltage)
Product Brief:​ 3-phase interior permanent magnet (IPM/NdFeB) synchronous servo motor. Frame "40" = B-40x — flange 110 mm × 110 mm (NEMA 56 / IEC 110), pilot ≈ 80 mm, 4× M8 on 130 mm BCD. "B" winding = medium-low torque constant / higher speed capability. Factory-fitted with 2-pole resolver (standard on Goldline B). "A1" = keyed shaft + standard seals; "B2" = mating circular connector type + optional shaft seal. Compatible with SERVOSTAR S300/S600/S700 and AKD (120/240 V models for B-winding).

Kollmorgen CR06660

Product Brief:​ Factory-molded shielded cable with motor-side circular connector (Intercontec M23 or Hirschmann-style) and drive-side flying leads or mating connectors for Kollmorgen SERVOSTAR CD/S300/S600/S700 drives. CR06660 typically denotes a servo motor feedback cable (resolver or encoder) or combined power+feedback cable​ for small-to-mid frame Goldline B/M-series or AKM2x–AKM4x motors (≤ 6 A class). Exact function (POWER vs FEEDBACK) must be verified from the cable tag — CR-series cables are often feedback-only for Goldline; power cables of same era are CB-prefix.

Kollmorgen AKM41H-AN92GF0

Product Brief:​ High-torque-density 3-phase PMSM servo motor, frame 41 (100 × 100 mm IEC flange), H-winding = medium stack length for AKM41 (continuous stall torque ~4.8–5.5 Nm). Factory-fitted with EnDat 2.1/2.2 absolute multiturn encoder (option "92G"), keyed shaft ("N" = keyed in AKM code — confirmed by AN92GF0 where 'N' = keyed), 24 VDC spring-applied holding brake ("F" = brake present), and standard IP65 shaft seal + rotatable M23 feedback/power connectors. Auto-recognizable by AKD/S700 drives via motor ID resistor network.

Kollmorgen AKD-P00306-NBEC-0000

Product Brief:​ Compact single-axis Ethernet-based servo drive. "P00306" = P-version (120/240 VAC 1Φ/3Φ input), 3 Arms continuous / 9 A peak. "NBEC" = N(Standard I/O), B(EtherCAT fieldbus card fitted), E(No STO), C(Extended I/O). "0000" = No additional accessories. Supports high-speed real-time communication via EtherCAT (CoE CiA 402 profile) for multi-axis synchronization. Fully compatible with AKM and AKM2G motors via auto motor ID.

Kollmorgen AKD-P04807-NB

Product Brief:​ High-performance single-axis servo amplifier for PMSM, asynchronous AC, linear, and DC brush motors. "P04807" = P-version (187–528 VAC 3Φ input), 48 Arms continuous / 96 A peak. "N" = no extra option card fitted (fieldbus slot empty). "B" = No built-in fieldbus interface card — analog ±10 V, Step/Dir, Encoder Follower, and Modbus TCP via Ethernet port are standard. Final "—" (no trailing letters) = Standard I/O, no STO. Delivers up to 32 kW​ continuous output power @ 480 VAC. Fully auto-recognizes AKM/AKM2G motors via M23 connector ID resistors.

Kollmorgen MCSS08-3224-00

Product Brief:​ The part number MCSS08-3224-00 denotes a custom-engineered motion control sub-assembly, cable harness, or sensor array originally designed for a specific OEM machine builder or specialized industrial application. These components are tailored to meet unique mechanical and electrical requirements of a particular machine platform. As a legacy custom part, detailed public specifications are not available, and it typically requires direct OEM consultation for replacement or cross-referencing to a standard product.