Digital guide
You are here:
Kollmorgen CB06261
Product Brief: Factory-molded shielded power cable with motor-side circular connector (Intercontec M23) and drive-side flying leads or terminal-block plug for Kollmorgen SERVOSTAR S300/S600/S700 or AKD drives. CB06261 typically denotes a motor power cable (with or without brake leads) for small-to-mid frame Goldline B/M-series or AKM2x–AKM4x motors (≤ 6 A class, 3 m length typical — “06261” encodes length and pinout). For AKM motors the equivalent modern part is CE-prefix (e.g., CE06261 = AKM power cable 3 m). CB06261 = legacy Goldline/early AKM power cable.
Detailed content
Cable Type: Motor Power + optional Brake Leads (if -B suffix — CB06261 base = power only; CB06261-B = power + brake)
Conductor Spec (Power): 4× power conductors AWG 18–AWG 16 (rated ≤ 6–10 A continuous)
Brake Conductors (if fitted): 2× AWG 22 (24 VDC brake)
Shielding: Overall tinned copper braid + AL-foil, drain wire terminated at drive-end connector shell
Jacket Material: PUR (Polyurethane) — oil-resistant, flame-retardant per UL 20276 / IEC 60332-1
Rated Voltage: Power cores ≤ 600 V AC/DC; Brake ≤ 30 V DC / 250 V AC
Temperature Range (Operation): –25 °C to +80 °C (PUR jacket)
Bend Radius (Static): ≥ 5 × OD; (Flex/Trailing Chain) ≥ 10 × OD
Connector (Motor End): M23 / Intercontec circular, keyed, rotatable, IP65 when mated
Connector (Drive End): Flying leads with ferrules or pre-installed terminal-block plug per SERVOSTAR/AKD I/O layout
Length (Typical CB06261): 3 m (encoded in “6261” — 626 = 3 m; last digit = variant)
Compliance: CE, UL recognized component, RoHS
Applicable Industries: Legacy Goldline B/M-series & early AKM equipped packaging, converting, printing, textile retrofits
Installation Requirements (Cable): Route separately from feedback/low-voltage signal cables (≥ 200 mm separation or partitioned duct); bond shield to drive chassis ground terminal only at one end (drive side); verify M23 connector keyway before mating; torque power terminals to spec (AKD: 0.5–0.8 Nm).
Usage Notes: Pair CB06261 power cable with CR-series feedback cable of matching length for non-hybrid Goldline installations; for AKM motors use CE (power) + CP (feedback) modern cables; inspect O-ring on motor connector before mating to maintain IP65.
