Kollmorgen

You are here:
  1. Home
  2. Kollmorgen
  3. Page 8

Kollmorgen AKM32D-ANCNR-01

  • Product Name:​ AKM Size 32 Brushless PM Servo Motor, Winding D, Resolver, No Brake, Rev 01
  • Introduction:​ 70×70 mm flange AKM, D winding, 640 VDC bus, resolver feedback, -01 = connector/mechanical revision.
  • Technical Specifications:
    • Max Bus: 640 VDC

Kollmorgen 700S7120S-NANNA

  • Product Name:​ S700 Series Digital Servo Drive, 12 A Continuous, Base Config (NANNA)
  • Introduction:​ S7120S variant, 208–480 VAC 3-phase, 12 A RMS continuous, 24/30 A peak, STO standard, no option cards (NANNA = base).
  • Technical Specifications:
    • Supply: 3×208–480 VAC (290–675 VDC bus)

Kollmorgen S20660-SRSS

  • Product Name:​ SERVOSTAR S200 Series AC Servo Drive, 120/240 VAC, 6 A, SynqNet (RJ45)
  • Introduction:​ Legacy fully digital S200 drive, single/3-phase 120/240 VAC, 6 A continuous, SRS = SynqNet with RJ45; predecessor to S700/AKD.
  • Technical Specifications:
    • Supply: 120/240 VAC 1-/3-phase

Kollmorgen AKM43L-BKC2AB00

  • Product Name:​ AKM Size 43 Brushless PM Servo Motor, Winding L, Encoder, With Brake
  • Introduction:​ 84×84 mm flange AKM, L winding (high speed), C2 = single-cable encoder class, B = 24 VDC fail-safe brake fitted.
  • Technical Specifications:
    • Max Bus: 640 VDC

Kollmorgen TTR-53810-4002-B-02-1

  • Product Name:​ Kollmorgen TTR Series DC Torque Motor / Direct-Drive Rotor Assembly
  • Introduction:​ Low-voltage DC direct-drive torque motor or linear-stage rotor component; TTR prefix denotes torque tube/rotor assembly, not a rotating AKM servo.

Kollmorgen AKM44H-ANDNCA00

  • Product Name:​ AKM Size 44 Brushless PM Servo Motor, Winding H, SFD/Encoder, No Brake
  • Introduction:​ 84×84 mm flange AKM with H winding (higher speed/lower torque than E), D = SFD feedback in AKM code.
  • Technical Specifications:
    • Max Bus: 640 VDC

Kollmorgen AKM64K-ANC2R-00

  • Product Name:​ AKM Size 64 Brushless PM Servo Motor, Winding K, Resolver, No Brake
  • Introduction:​ Large AKM frame for high continuous torque, 640 VDC bus class.
  • Technical Specifications:
    • Max Bus: 640 VDC

Kollmorgen AKM21G-ENBN2-00

  • Product Name:​ AKM Size 21 Brushless PM Servo Motor, Winding G, Encoder, No Brake
  • Introduction:​ Small AKM motor, 58×58 mm flange, 75 VDC bus class, low-inertia axis.
  • Technical Specifications:
    • Max Bus: 75 VDC

Kollmorgen AKM42E-ANCNR-00

  • Product Name:​ AKM Size 42 Brushless PM Servo Motor, Winding E, Resolver, No Brake
  • Introduction:​ Mid-frame AKM synchronous servo motor with 84×84 mm IEC flange, smooth shaft, resolver feedback.
  • Technical Specifications:
    • Max Bus: 640 VDC

Kollmorgen AKD-P00307-MCE

  • Product Name:​ AKD Series Ethernet Servo Drive, 240/480 VAC, 3 A, MCE option configuration
  • Introduction:​ 400 V-class single-axis AKD drive with 3 A continuous output and MCE-denoted option card/firmware preset; pairs with AKM 400 V windings.
  • Technical Specifications:
    • Supply: 240/480 VAC 3-phase (187–528 VAC)

Kollmorgen LE03565-JW02

  • Product Name:​ Kollmorgen LE03565 Controller / I/O Module (JW02 = OEM/config suffix)
  • Introduction:​ Legacy Kollmorgen/Danaher Motion control or analog I/O module used in older SERVOSTAR/PLC rack systems; not an AKD-class servo drive.
  • Technical Specifications:
    • Input: 0–10 VDC or 4–20 mA (analog input variant); isolated 1500 Vrms

Kollmorgen AKD-P00307-MCE

  • Product Name:​ AKD Series Servo Drive, 240/480 VAC, 3 A, extended option slot
  • Introduction:​ 400 V-class AKD drive with lower current rating and expanded option-card capability (MCE = specific option/firmware variant).
  • Technical Specifications:
    • Supply: 240/480 VAC 3-phase (187–528 VAC)