Digital guide
You are here:
Kollmorgen CB10550
Product Brief: Factory-molded shielded cable with motor-side circular connector (Intercontec M23 or Hirschmann-style) and drive-side flying leads or mating connectors for Kollmorgen SERVOSTAR CD/S300/S600/S700 drives. CB10550 typically denotes a ServoStar CD/S300/S600 compatible motor power cable (and/or feedback — verify from cable tag: POWER vs FEEDBACK) for mid-current AKM/Goldline B/M-series motors (≈ 6–12 A rating). Some CB10550 references indicate the SERVOSTAR CD10550 drive — if the received item is a drive (heat sink + terminals + connectors) treat as SERVOSTAR CD10550 (230 VAC, 5 A cont); if a flexible cable with connectors, use the cable specs below.
Detailed content
Cable Type (if cable): Motor Power + optional Brake Leads (if POWER version) OR Feedback/Resolver/Encoder (if FEEDBACK version — CB10550 commonly cited as power cable for CD10550/S300 6A class)
Conductor Spec (Power): 4× power conductors AWG 18–AWG 16 (rated ≤ 20 A continuous), brake pair AWG 22
Conductor Spec (Feedback — if resolver version): Twisted-pair screened wires AWG 24–AWG 22 — R1/R2 excitation + S1/S2/S3/S4 sine/cosine; if encoder: A/A– B/B– Z/Z– + 5 V/GND + thermistor
Shielding: Overall tinned copper braid + AL-foil, drain wire terminated at drive-end connector shell
Jacket Material: PUR (Polyurethane) — oil-resistant, flame-retardant per UL 20276 / IEC 60332-1; halogen-free option on some revisions
Rated Voltage: Power cores ≤ 600 V AC/DC; Signal cores ≤ 30 V DC
Temperature Range (Operation): –25 °C to +80 °C (PUR jacket)
Bend Radius (Static): ≥ 5 × OD; (Flex/Trailing Chain) ≥ 10 × OD
Connector (Motor End): M23 / Intercontec circular, keyed, rotatable, IP65 when mated
Connector (Drive End): Flying leads with ferrules OR pre-installed terminal-block plug / SUB-D (feedback) per SERVOSTAR I/O layout
Length: Defined by last digits of full order code (common: 3 m / 5 m / 7 m / 10 m)
Compliance: CE, UL recognized component, RoHS, DESINA color coding (where applicable)
Applicable Industries: Legacy Goldline B/M-series & AKM (early gen) equipped packaging, converting, printing, textile retrofits
Installation Requirements (Cable): Route power and feedback cables separately from high-voltage mains (≥ 200 mm separation or partitioned duct); bond shield to drive chassis ground terminal only at one end (drive side); verify connector keyway before mating; avoid tight bend radii < 5× OD.
Usage Notes (Cable): If CB10550 is power cable — pair with CR/CB feedback cable of matching length; inspect O-ring on motor connector before mating to maintain IP65; if the item is physically a drive (CB10550 = SERVOSTAR CD10550), refer to CD10550 specs: 230 VAC 3Φ, 5 A cont / 10 A pk, SERCOS or analog, resolver/encoder feedback, IP20, 0…+45 °C.
