Digital guide
You are here:
Kollmorgen P02406-NBC
Product Description:
The “P” prefix generally refers to Kollmorgen’s Goldline P-Series (or sometimes re-badged as part of Goldline+ / BMH lineage in later catalogs) — medium/high inertia, larger frame servo motor for 230/400 VAC. Frame 240 ≈ 240 mm flange, stack 6 (long), winding C, with resolver and brake (B = brake, C = connector/config). These were used in demanding continuous-duty applications needing higher inertia match.
Detailed content
Typical Specifications (P-240×6 — approximate):
-
Frame Size: 240 mm (NEMA 140 / IEC 225 equivalent)
-
Continuous Stall Torque: ≈ 95–110 Nm (varies by winding)
-
Peak Torque: ≈ 250–300 Nm
-
Rated Speed: 1500–3000 RPM (winding C typically lower speed, higher torque)
-
Bus Voltage: 320 VDC (230 VAC) or 565 VDC (400/480 VAC) — check winding code
-
Feedback: Resolver (std for -NBC)
-
Brake: 24 VDC or 90 VDC spring-applied (present — “B” in suffix)
-
Insulation: Class H
-
Enclosure: IP65 (sealed)
-
Thermostat: Yes
Applications:
Large press feeds, extruder screws, heavy-duty winding/unwinding, large gantry Y/Z axes.
Installation & Precautions:
-
Motor is heavy — ensure rigid mounting and secure lift during install.
-
Brake requires correct DC voltage and must release before drive enable.
-
Regenerative resistor may be needed for large inertia deceleration — consult drive setup.
