Digital guide
You are here:
Kollmorgen S70362-NANANA-US
Product Introduction: High-current S700 drive for large-frame AKM5x–AKM6x or gold-line motors. “NANANA” coding = no fieldbus option installed (control via ±10 V analog, master encoder follow, or step/direction on X3/X1), standard digital I/O, 24 V aux., and STO included. “US” = UL/cUL listed, 400/480 V AC rating.
Detailed content
-
Performance Parameters:
-
Rated (Continuous) Current: 36 A RMS
-
Peak Current: 72 A RMS (short duration)
-
Input Voltage (Mains): 3-phase 400–480 V AC (±10%), 50/60 Hz
-
DC Bus Voltage: approx. 540–680 V DC
-
Aux. Supply: 24 V DC ±20% (terminal X4)
-
-
Control Modes: Torque (analog ±10 V or digital), Velocity (analog or master-follow), Position (step & direction, electronic gearing, CAM profiles via internal setpoints)
-
Feedback Supported: Same full range as S700 — Resolver, incremental encoder, sin/cos, EnDat 2.1/2.2, Hiperface, SSI, BiSS
-
I/O: 8 dig. in (24 V), 3 dig. out (24 V), 2 analog in (configurable ±10 V / 0–10 V / 4–20 mA), 1 analog monitor out; Enable input, Fault relay
-
Regeneration: Internal brake chopper; external dynamic braking resistor recommended for high regen energy (connect to X8)
-
Mechanical & Environment:
-
Dimensions: wider housing than low-current S700 — approx. 100 × 306 × 228 mm (W × H × D typical for 36 A frame)
-
Cooling: Forced convection / integral fan depending on revision
-
Protection: IP20
-
Op. Temp.: 0 … +45 °C (derate above), Storage −25 … +70 °C
-
-
Certifications: CE, UL, cUL, cTÜVus, RoHS
-
Installation Notes: Requires adequate panel ventilation and separation from sensitive low-voltage wiring. Use ferrules on stranded wire. Torque terminals to specified values (typically 1.2–2.5 N·m depending on terminal size). Bus-bar or heavy-gauge cabling for power connections.
