Digital guide
You are here:
Kollmorgen AKD-P02407-NAE
Product Name: AKD Series AC Servo Drive (Position Indexer, 240–480 VAC, 24 A, Analog + Endat/Resolver)
Product Introduction: The Kollmorgen AKD-P02407-NAE is the 24 A continuous sibling of the P04807 on the same 240–480 VAC three-phase platform. “NAE” coding denotes analog command with EnDat/Resolver-capable feedback interface set and standard indexer firmware. It covers mid-range servo axes where 7–16 kW mechanical output is needed.
Detailed content
Technical Specifications:
-
Input Voltage: 3 × 187–528 VAC
-
Control Supply: 24 VDC
-
Continuous Output Current: 24 A RMS
-
Peak Output Current: 48 A RMS for 5 s
-
Continuous Output Power: 16,000 W (16 kW)
-
DC Bus Range: 340–680 VDC
-
Feedback: EnDat 2.2, resolver, sine/cos, incremental (SFD/BiSS optional via firmware)
-
Communication: Analog ±10 V, CANopen via RJ25, service Ethernet; no native EtherCAT unless card added
-
Protection: IP20, STO, thermal/overcurrent/overvoltage
-
Dimensions: 196 × 72 × 187 mm
-
Weight: 2.0 kgFunctional Features: Same AKD current loop (0.67 µs), autotuning, WorkBench oscilloscope, indexer motion tasks, plug-and-play with AKM.Application Scenarios: Mid-size conveyor indexing, spindle辅助轴, cartoner drives, rotary tables.Installation Requirements: Vertical DIN/panel mount, 24 VDC isolated supply, shielded cable, minimum 30 mm side clearance.Usage Notes: De-rate output if ambient exceeds 40 °C; NAE variant expects EnDat wiring on X9/X10 D-sub—mixing resolver and EnDat without parameter change causes fault F305.
