Others

You are here:
  1. Home
  2. Others
  3. Page 14

DELTA TAU OMRON ACC-68E

Introduction​
ACC-68E is a 3U rack interface board that provides optically isolated sinking digital inputs and sinking digital outputs for Delta Tau OMRON UMAC systems. It connects sensors, limit switches, pushbuttons, relays, solenoid valves, indicator lamps and other discrete devices to the PMAC control program through the UBUS backplane. The board is designed for noisy industrial cabinets where electrical isolation, self-protection and high-density discrete I/O are required.

Enedo ADC5483-D200136L

Product Introduction​
ADC5483-D200136L is treated as an Enedo ADC5483-series DIN-rail charging unit configured for 24 VDC battery systems. The base ADC5483 provides regulated 24 V charging, float compensation, and industrial backup power for control panels, security systems, and automation cabinets. The D200136L portion is used here as the procurement/configuration identifier; all performance values below follow the standard ADC5483 charger specification and must be confirmed against the nameplate of the delivered unit.

Parker Acroloop ACR1000A-R2

Product Name​
Parker/Acroloop ACR1000A-R2 two-axis motion controller.
Product Introduction​
ACR1000A-R2 is an Acroloop/Parker ACR-series motion controller for one or two servo or stepper axes. It operates as a PC ISA-bus controller or as a standalone RS-232 controller, includes a built-in PLC function, encoder feedback processing, analog servo output, and watchdog protection. The R2 revision is configured for Acroloop ACR1000 firmware and option set used in point-to-point, interpolation, and contouring applications.

Delta Tau ACC28B-A-D INTERFACE 24 AXIS

Product Introduction​
This designation describes a rack or DIN-mounted PMAC signal interface that converts PMAC/PMAC-2 motion commands into isolated differential step and direction signals for 24 independent servo or stepper axes. It returns drive fault, ready, and limit status, distributes axis-enable interlocks, and executes emergency-stop disabling. The standard Delta Tau ACC-28B board is a 16-bit analog-to-digital converter module; the ACC28B-A-D INTERFACE 24 AXIS designation is applied by integrators to a 24-axis digital motion interface and does not use standard ACC-28B ADC specifications.

Delta Tau ACC-8E PMAC-2 602469-103

Product Introduction​
ACC-8E is a PMAC-2 accessory board that converts PMAC motion commands into isolated analog servo signals and returns quadrature encoder feedback, home/limit/flag status, and amplifier-enable control. Standard boards serve four analog servo axes; 602469-103 sourced configurations are supplied in eight-channel analog servo builds through dual quad DAC groups or option expansion. The board connects to PMAC-2 through a flat-cable/backplane interface and wires field signals through removable terminal blocks or IDC headers.

VALMET AI8H D201189

Product Name
VALMET AI8H D201189 analog input module
Product Introduction
The AI8H D201189 is an analog input module used in a Valmet DNA distributed control system. It acquires standard 4–20 mA field signals from process transmitters and converts them into digital values for control, monitoring, and alarming. Publicly available official technical documentation for this exact spare number is limited.

DANAHER AHD70E4-44S

Product Name
DANAHER AHD70E4-44S servo drive unit
Product Introduction
The AHD70E4-44S is an industrial servo drive. The product description and full technical data sheet were not found in the available public manufacturer documentation. Therefore, the exact ratings, supported motor types, feedback interfaces, and safety functions cannot be confirmed.

DEIF AGC/GS/3

Product Name
DEIF AGC/GS/3 automatic genset controller
Product Introduction
The DEIF AGC/GS/3 is an automatic genset control module used for generator monitoring, automatic start and stop, synchronizing, load sharing, and multi-unit power management. It is intended for diesel generator sets operating in island mode, parallel operation, or standby power applications.

Genteq by Regal Rexnord 5KCP39PG

Product Name​
Genteq 5KCP39PG Series Permanent Split Capacitor Industrial Motor
Product Overview​
The 5KCP39PG prefix covers Genteq OEM replacement alternating-current motors produced under Regal Rexnord. The verified configuration 5KCP39PGU719S is a 48-frame, 5.6-inch diameter motor built for air-over blower and fan duties. The same 5KCP39PG family also includes other suffixes with different voltage, speed and horsepower ratings, so the nameplate suffix defines the exact electrical data.

LAM RESEARCH 61-380630-00

Product Name:​ 32-Channel Temperature Process Controller, 32TC
Product Introduction:​ This controller card performs multi-zone closed-loop thermal regulation for semiconductor process chambers, conditioning thermocouple or RTD inputs and executing PID control to maintain wafer-zone temperature uniformity.

LAM RESEARCH 605-109114-003

Product Name:​ RF Impedance-Matching Control Board
Product Introduction:​ This board performs automatic RF impedance matching and process closed-loop control for Lam plasma etch and thin-film platforms, coordinating RF power, gas, vacuum and chamber sensor subsystems.

LAM RESEARCH 605-109114-001

Product Name:​ Tool Controller / VME Single-Board Computer Module
Product Introduction:​ This board provides real-time control, communication and processing functions for Lam Research etch and deposition platforms, handling recipe execution, interlock processing and chamber/subsystem coordination.