Others

You are here:
  1. Home
  2. Others
  3. Page 92

AEG M907-000 Modicon 900 Series Memory Module

  • Product Introduction: This is a dedicated non-volatile memory module for the AEG Modicon 900 series PLC CPU modules, used to store user control programs, system configuration parameters, and important process data. It adopts advanced EEPROM and battery-backed RAM dual memory design, ensuring that the stored data will not be lost for a long time even when the power is off, and is an important functional module for the PLC system to realize program storage and data retention.
  • Technical Specifications:
    • Memory Type: 512 KB EEPROM (for program storage) + 256 KB battery-backed RAM (for data storage).
    • EEPROM Erase/Write Times: ≥100,000 times; Data Retention Time: ≥10 years (without power supply).
    • RAM Battery Type: Lithium battery, built-in, battery life ≥5 years (at 25°C).
    • Data Transmission Interface: Parallel interface, compatible with Modicon 900 series CPU backplane bus, data transmission rate up to 1 Mbps.

AEG 120-085-001 120 Series Servo Driver

  • Product Introduction: This is a high-performance digital servo driver of the AEG 120 series, specially matched with AEG 120 series servo motors to form a complete servo control system. It adopts advanced vector control algorithm, which can realize high-precision position, speed and torque closed-loop control, and is the core drive component for industrial equipment to realize precise motion control.
  • Technical Specifications:
    • Input Voltage: 220 VAC single-phase/three-phase selectable, 50/60 Hz, voltage tolerance ±10%.
    • Rated Output Power: 1.5 kW; Rated Output Current: 7.0 A; Peak Output Current: 21.0 A (3 seconds).
    • Control Modes: Position control (pulse/direction, CW/CCW), speed control (analog voltage, communication), torque control (analog voltage, communication).
    • Positioning Accuracy: ±1 pulse; Speed Regulation Range: 1:10000 (0.1 rpm to 3000 rpm).

AEG AS-9584-000 Modicon 984 Series PLC Chassis

  • Product Introduction: This is a dedicated rack chassis and backplane bus module for the AEG Modicon 984 series medium and large PLC systems, providing a standardized mechanical installation space and high-speed data transmission bus for the 984 series CPU, I/O, communication, and functional modules. It adopts a modular backplane design, supports multi-chassis expansion, and is the core hardware carrier for building large-scale industrial control systems.
  • Technical Specifications:
    • Number of Module Slots: 8 standard slots, compatible with all Modicon 984 series I/O and functional modules.
    • Backplane Bus Type: High-speed parallel bus, data transmission rate up to 10 Mbps.
    • Bus Power Supply: 24 VDC, provided by an external dedicated power supply module (AS-S908 series recommended).

AEG AS-B872-100 2-Channel Analog Output Module

  • Product Introduction: This is a 2-channel analog output module of the AEG Modicon 800 series PLC, which converts the digital control signals generated by the PLC CPU into standard analog voltage/current signals to drive industrial field actuators such as electric regulating valves, frequency converters, and servo drivers. It is a key interface module for the PLC system to realize continuous and precise control of industrial processes.
  • Technical Specifications:
    • Output Channels: 2 independent isolated analog output channels, each channel can be configured independently.
    • Output Signal Types: 0-5 VDC, 0-10 VDC (voltage output); 4-20 mA, 0-20 mA (current output), software configurable.
    • Resolution: 12 bits; Output Accuracy: ±0.1% of full scale at 25°C, ±0.25% over the entire operating temperature range.

AEG AS-S908-120 Modicon 900 Series Power Supply Module

  • Product Introduction: This is a dedicated industrial power supply module for the AEG Modicon 900 series PLC systems, engineered to provide stable and regulated DC power to the PLC backplane bus, I/O modules, and other peripheral components in industrial control cabinets. It features high voltage tolerance and anti-interference performance, ensuring uninterrupted power supply for the entire control system even in harsh industrial grid environments.
  • Technical Specifications:
    • Input Voltage: 115/230 VAC selectable, 50/60 Hz, voltage tolerance ±15%.
    • Output Voltage: 24 VDC, output voltage accuracy ±0.5%.
    • Rated Output Current: 5 A, peak output current 6 A for 10 seconds.
    • Power Efficiency: ≥85% at full load, no-load power consumption ≤2 W.

AEG OUTPUT B824 16-Channel 24 VDC Digital Output Module

  • Product Introduction: It is a classic 16-channel DC digital output module of the AEG Modicon 800 series, specially used to convert the digital control signals output by the PLC CPU into 24 VDC switching signals, drive various low-voltage industrial field actuators, and is the key execution interface of the PLC control system to connect the on-site equipment.
  • Technical Specifications:
    • Output Channels: 16 independent digital output channels, divided into 4 common groups of 4 channels each, supporting independent on/off control of each channel.
    • Output Type: Sourcing output (PNP type), compatible with most 24 VDC DC actuators on the market.
    • Rated Output Voltage: 24 VDC ±10%; Maximum Output Current: 2 A per channel, 8 A per common group.
    • Output Response Time: ≤5 ms (on), ≤3 ms (off); Drop-out Voltage: ≤1 VDC.
    • Overload Protection: Each channel is equipped with overcurrent and short-circuit protection, and the protection current is 2.5 A ±0.2 A, which automatically recovers after the fault is removed.

AEG AS-884A-201 High-Speed Counter Module

  • Product Introduction: It is a high-performance high-speed counter module of the AEG Modicon 884 series, specially designed for collecting high-frequency pulse signals from industrial field speed sensors, encoders and proximity switches. It can realize high-precision counting, frequency measurement and position detection, and transmit the collected data to the PLC CPU in real time to provide data support for the speed, position and displacement control of the equipment.
  • Technical Specifications:
    • Counting Channels: 4 independent high-speed counting channels, supporting single-phase and two-phase (A/B phase) pulse input.
    • Counting Frequency: Single-phase pulse maximum 500 kHz, two-phase A/B pulse maximum 250 kHz (4X quadrature decoding).
    • Counting Range: 32-bit signed integer, range from -2147483648 to 2147483647.

AEG AS-J540-100 Communication Interface Module

  • Product Introduction: It is a communication interface module designed for AEG Modicon series PLC, which can realize the data interaction between the PLC system and the upper‑level monitoring equipment (such as SCADA, HMI) through the Modbus TCP/IP protocol. It is the key component to realize the networking and remote monitoring of the industrial control system.
  • Technical Specifications:
    • Communication Protocol: Modbus TCP/IP, compatible with Modbus RTU protocol through protocol conversion.
    • Network Interface: 10/100 Mbps RJ45 Ethernet port, supporting full‑duplex communication.
    • Communication Distance: Up to 100 meters (twisted pair), supporting fiber‑optic extension.
    • Number of Connections: Up to 16 concurrent TCP connections.

AEG 120-166-006 Brushless Servo Motor

  • Product Introduction: It is a high‑performance brushless servo motor of the AEG Modicon 120 series, which integrates a permanent magnet rotor and a high‑precision encoder. It can realize high‑speed and high‑precision position, speed and torque control under the drive of the servo driver, and is used to drive the executive components in the industrial automation system to complete the precise motion control task.
  • Technical Specifications:
    • Rated Power: 0.75 kW; Rated Voltage: 220 VAC (three‑phase); Rated Current: 3.8 A.
    • Rated Speed: 3000 rpm; Maximum Speed: 6000 rpm; Rated Torque: 2.39 N·m.
    • Encoder: 2500‑line incremental encoder, supporting position feedback and speed measurement.
    • Protection Class: IP65 (motor body), IP20 (connector); Insulation Class: Class F.
    • Cooling Method: Forced air cooling; Weight: 5.2 kg; Dimensions: 110mm × 140mm (diameter × length).

AEG AS-B883-111 8‑Channel Analog Input Module

  • Product Introduction: It is an 8‑channel analog input module of the AEG Modicon 800 series, which is used to collect analog signals (voltage/current) from industrial field sensors such as temperature, pressure, flow, and level, convert them into 12‑bit digital signals through A/D conversion, and transmit them to the CPU module for data processing and control decision‑making.
  • Technical Specifications:
    • Input Channels: 8 independent analog input channels, supporting single‑ended or differential input switching.
    • Signal Types: Voltage (0‑5 VDC, 0‑10 VDC) and current (4‑20 mA) signals are optional.
    • Resolution: 12 bits; Conversion Accuracy: ±0.1% of full scale.
    • Conversion Time: ≤100 μs per channel.

AEG 1210880V5 Industrial Power Filter Module

  • Product Introduction: It is a power filter module designed for AEG industrial control equipment, which is used to filter out electromagnetic interference (EMI) and radio frequency interference (RFI) in the power supply line, protect the PLC, frequency converter and other precision equipment from the impact of grid noise, and ensure the stable and reliable operation of the equipment.
  • Technical Specifications:
    • Input Voltage: 220‑240 VAC, 50/60 Hz; Rated Current: 10 A.
    • Filtering Performance: It can suppress common‑mode and differential‑mode interference, and the attenuation of interference signals above 1 MHz is ≥40 dB.
    • Leakage Current: ≤1 mA; Response Time: ≤1 μs.

AEG 110‑222 Micro PLC Expansion Terminal Block

  • Product Introduction: It is a dedicated expansion terminal block for the AEG Modicon 110 series micro PLC, which is used to expand the external wiring interface of the PLC. It can connect multiple digital/analog I/O signals in a centralized manner, and realize the reliable transmission of field signals and PLC modules. It is an important accessory to ensure the stable operation of the small‑scale control system.
  • Technical Specifications:
    • Number of Terminals: 24 screw terminals, divided into 3 groups of 8 channels each, supporting mixed connection of input and output signals.
    • Rated Voltage: 250 VAC/30 VDC; Rated Current: 5 A per terminal.
    • Wiring Type: Screw clamping, suitable for wires with a cross‑section of 0.5‑2.5 mm².
    • Isolation: 1000 VAC isolation between terminal groups.
    • Operating Temperature: -20°C to +60°C; Protection Rating: IP20; Dimensions: 80mm × 50mm × 30mm (W×H×D); Material: Flame‑retardant ABS plastic.