Others

You are here:
  1. Home
  2. Others
  3. Page 85

AEG AS-9715-001 Analog Input Module

  • Product Introduction: AEG AS-9715-001 is an analog input module for the Modicon 800 series, used to convert analog signals from sensors (e.g., temperature, pressure, flow) into digital data for processing by PLCs. It offers high precision and stability for critical measurement applications.
  • Technical Specifications:
    • Number of Channels: 8 differential analog inputs
    • Input Signal Types: 4-20 mA, 0-10 V DC, thermocouples (Type J, K, T, E), RTD (PT100)
    • Resolution: 16-bit
    • Accuracy: ±0.1% of full scale
    • Sampling Rate: 100 samples per second per channel
    • Isolation: Channel-to-channel isolation (500 V AC)

AEG MM-FMC3-010 Modular Fieldbus Communication Module

  • Product Introduction: AEG MM-FMC3-010 is a fieldbus communication module under Schneider Electric's AEG Modicon series, designed to enable data exchange between field devices and upper-level control systems in industrial automation environments. It supports multiple fieldbus protocols for seamless integration into distributed control systems.
  • Technical Specifications:
    • Communication Protocols: Profibus-DP, CANopen, Ethernet/IP, Modbus TCP/IP
    • Communication Rate: Up to 12 Mbps (Profibus-DP), 1 Mbps (CANopen), 100 Mbps (Ethernet/IP)
    • Number of Communication Ports: 2 x RS-485, 1 x Ethernet (RJ45), 1 x CAN
    • Power Supply: 24 V DC (1.2 A typical)

AEG NW-BP85-000 Modicon Network Backplane Bus Module

  • Product Introduction: This is an industrial-grade network backplane bus module for AEG Modicon NW series PLC systems, serving as the core communication hub and backplane bus controller for multi-module PLC chassis. It integrates an 8-slot high-speed backplane bus, 10/100 Mbps Ethernet ports (Modbus TCP/IP), and bus redundancy functions, realizing high-speed data exchange between installed PLC modules (CPU, I/O, communication, special function) and seamless connection with the upper industrial control network (SCADA, HMI, MES). The module is designed for medium and large-scale industrial automation systems, providing a reliable, scalable and high-speed communication foundation for centralized control and distributed I/O networking of Modicon NW series PLCs.
  • Technical Specifications:
    • Slot Configuration: 8 standard slots, supporting hot-swappable installation of Modicon NW series CPU, I/O, communication and special function modules.
    • Backplane Bus: 32-bit high-speed synchronous bus, data transmission rate 1 Gbps, ensuring low-latency data exchange between modules.
    • Ethernet Interfaces: 2×10/100 Mbps RJ45 ports (Modbus TCP/IP), supporting auto MDI/MDIX, port redundancy and network fault self-healing.
    • Network Protocols: Modbus TCP/IP, TCP/IP, UDP/IP, supporting communication with upper SCADA, HMI and MES systems.

AEG AS-02MP-000 Modicon Auxiliary Motion & Process Processing Module

  • Product Introduction: This is a dedicated auxiliary processing and interface module for AEG Modicon 800 series PLC systems, engineered to offload specialized motion control and complex process calculation tasks from the main PLC CPU, enhancing the overall system’s processing efficiency and real-time performance. It integrates a dedicated motion processing core, analog/digital signal preprocessing circuits, and high-speed I/O interfaces, supporting simple motion control (single-axis positioning, speed regulation) and advanced process data analysis (filtering, scaling, PID pre-calculation). The module acts as a co-processor for the main CPU, enabling the Modicon 800 series to handle mixed control tasks of logic, motion, and process in industrial automation scenarios, and is a key expansion component for improving the PLC system’s multi-task processing capability.
  • Technical Specifications:
    • Processing Core: 16-bit dedicated motion/process processor, operating frequency 40 MHz, independent of the main CPU.
    • Supported Control Tasks: Single-axis stepper/servo motor positioning, speed regulation (0-5000 RPM), analog signal preprocessing (filtering, linearization, scaling), PID loop pre-calculation (up to 8 loops).
    • High-Speed I/O Interfaces: 2×high-speed pulse output (PTO, 0-100 kHz) for motion control, 2×high-speed counter input (0-100 kHz, incremental encoder compatible).

AEG Modicon AS-02MP-000 Auxiliary Processing Circuit Board

Functional Features

  • Stable Signal Processing: Capable of sorting, buffering, and distributing signals inside the industrial control system. It ensures smooth communication between controllers and accurate execution of instructions, reducing signal interference and transmission errors in complex industrial electromagnetic environments.
  • Clear Functional Positioning: It can serve as an interface adapter, data transmission hub, or functional expansion unit according to actual application requirements. It can effectively connect the main control board with external devices, realizing data exchange and functional extension.
  • Industrial - Grade Reliability: Adopting high - temperature - resistant and anti - interference electrical structure design. It can maintain stable performance in harsh industrial sites with strong electromagnetic interference, high temperature, and high humidity, and has a long service life.
  • Compact and Easy Integration: The small - sized layout allows for easy installation inside the rack or next to other control modules. It can be seamlessly integrated with the Modicon series control system without occupying excessive space.
  • Simple Maintenance: The modular design enables plug - and - play replacement. When a fault occurs, the board can be quickly replaced by plugging and unplugging it on the rack or motherboard, greatly improving maintenance efficiency and reducing system downtime.
  • Low Power Consumption: The power consumption is less than 2W during operation, which helps to reduce the overall power consumption of the control system and meet the energy - saving requirements of modern industrial equipment.

AEG 110CPU41102 Modicon Micro 411 Programmable Logic Controller (PLC) CPU Module

  • Product Introduction: This is a compact, cost-effective CPU module for AEG Modicon 110 Micro series PLC systems, designed for small-scale industrial automation applications. It integrates an 8-bit microprocessor, 64 KB user memory, and basic communication interfaces, supporting IEC 61131-3 programming languages. It is built to execute simple to medium complexity control logic, process I/O signals, and communicate with external devices, providing a reliable control solution for machine control, lighting systems, and basic process monitoring in small factories, commercial buildings, and municipal facilities.
  • Technical Specifications:
    • Processor: 8-bit microprocessor, operating frequency 16 MHz, optimized for simple logic execution and data processing.
    • Memory: 64 KB user program memory, 32 KB data memory, non-expandable.
    • I/O Capacity: Supports up to 128 digital I/O points or 16 analog I/O points via expansion modules.
    • Communication Interfaces: 1×RS-232 (Modbus RTU), 1×RS-485 (Modbus RTU, multi-drop up to 16 devices).

AEG 6728-042.24466 Modicon Industrial Grade Analog Input Module

  • Product Introduction: This is an 8-channel universal analog input module for AEG Modicon 984 series PLC systems, designed to collect and convert analog signals from industrial sensors (pressure, flow, level, temperature) into digital data for the PLC CPU. It supports 4-20 mA current and 0-10 VDC voltage inputs, with 16-bit resolution and channel isolation, ensuring high measurement accuracy and signal integrity. It is built to withstand harsh industrial environments, providing reliable analog signal acquisition for process control, condition monitoring, and quality assurance applications.
  • Technical Specifications:
    • Input Channels: 8 independent channels, each configurable for 4-20 mA DC current or 0-10 VDC voltage input.
    • Resolution: 16-bit (65536 discrete values), ensuring fine measurement of analog signals.
    • Accuracy: ±0.05% FS at 25°C, ±0.1% FS over the operating temperature range (-25°C to +70°C).
    • Input Impedance: 250 Ω for 4-20 mA channels, 10 kΩ for 0-10 VDC channels, minimizing signal loading effects.
    • Isolation: 2500 VAC between channels and backplane, 1500 VAC between adjacent channels to prevent cross-interference.

AEG DAU104 Modicon 4-Channel Digital-to-Analog Conversion Module

  • Product Introduction: This is a 4-channel digital-to-analog conversion module designed for AEG Modicon 800 series PLC systems, converting digital control signals from the PLC CPU into precise 4-20 mA current or 0-10 VDC voltage output signals. It features 16-bit resolution, channel isolation, and overload protection, ensuring accurate and stable signal transmission to field actuators, such as control valves, variable frequency drives (VFDs), and positioners. It integrates seamlessly with Modicon PLC backplanes, providing a reliable interface for continuous process parameter control in industrial automation applications.
  • Technical Specifications:
    • Output Channels: 4 independent channels, each configurable for 4-20 mA DC current or 0-10 VDC voltage output.
    • Resolution: 16-bit (65536 discrete values), ensuring fine control of output signals.
    • Accuracy: ±0.05% full scale (FS) at 25°C, ±0.1% FS over the operating temperature range (-25°C to +70°C).
    • Current Output: 4-20 mA, maximum load resistance 750 Ω, ensuring no signal attenuation over long cable runs.
    • Voltage Output: 0-10 VDC, output impedance 10 Ω, maximum load current 20 mA.
    • Isolation: 2500 VAC between channels and backplane, 1500 VAC between adjacent channels to prevent cross-interference.

AEG 110CPU61210 Modicon Micro 612 Programmable Logic Controller (PLC) CPU Module

  • Product Introduction: This is a high-performance CPU module designed for AEG Modicon 110 Micro series PLC systems, serving as the core processing unit for industrial automation control. It integrates a 32-bit microprocessor, 256 KB user memory, and multiple communication interfaces, supporting IEC 61131-3 programming languages (LD, FBD, ST, IL, SFC). It is built to execute control logic, process I/O signals, and communicate with external devices in real time, providing a reliable and scalable control solution for small to medium-sized industrial automation applications, such as machine control, material handling, and process monitoring.
  • Technical Specifications:
    • Processor: 32-bit RISC microprocessor, operating frequency 50 MHz, ensuring fast logic execution and data processing.
    • Memory: 256 KB user program memory, 128 KB data memory, expandable to 512 KB via optional memory modules.
    • I/O Capacity: Supports up to 512 digital I/O points or 64 analog I/O points via expansion modules.
    • Communication Interfaces: 1×RS-232 (Modbus RTU), 1×RS-485 (Modbus RTU, multi-drop up to 32 devices), 1×Ethernet (10/100 Mbps, Modbus TCP/IP).

AEG 7628-200596.08 Modicon Backplane Bus Extender

  • Product Introduction: This is a 10-slot backplane bus extender for AEG Modicon 984 series PLC systems, designed to expand the I/O capacity of the main PLC chassis by connecting additional modules. It features a 32-bit high-speed bus with data transfer rates up to 100 Mbps, supporting CPU, I/O, and communication modules. It is ideal for large-scale industrial automation systems requiring extended I/O capacity, such as automotive manufacturing, power generation, and chemical processing.
  • Technical Specifications:
    • Slot Configuration: 10 slots, compatible with Modicon 984 series CPU, I/O, and communication modules.
    • Backplane Bus: 32-bit, 100 Mbps data transfer rate, ensuring fast communication between modules.
    • Power Distribution: 24 VDC input, 5 A per slot, total power capacity 50 W.
    • Isolation: 2500 VAC between backplane and external connections.
    • Dimensions: 483mm × 356mm × 229mm (W×H×D); Mounting: 19-inch rack-mounted (13U height).

AEG CRA 932 00 Modicon Contactor Relay

  • Product Introduction: This is a 3-phase contactor relay for AEG Modicon PLC systems, designed to switch 3-phase AC loads in industrial motor control and power distribution applications. It features a 24 VDC coil, 3 NO main contacts, and 1 NO auxiliary contact, with arc suppression and overload protection, ideal for controlling small to medium-sized motors, pumps, and fans in industrial automation systems.
  • Technical Specifications:
    • Poles: 3 main (NO) + 1 auxiliary (NO), silver alloy contacts for long life.
    • Coil Voltage: 24 VDC, power consumption 5 W, coil resistance 115 Ω.
    • Rated Current: 10 A (3-phase, 400 VAC, 50/60 Hz), resistive load.
    • Breaking Capacity: 100 A (3-phase, 400 VAC), at 50 Hz.
    • Arc Suppression: Built-in arc chutes for safe switching of inductive loads.

AEG 170BDI34600 Modicon Momentum 32-Channel Digital Input Module

  • Product Introduction: This is a 32-channel digital input module for AEG Modicon Momentum series distributed I/O systems, designed to collect discrete signals from industrial sensors in distributed automation environments. It supports 24 VDC sink (NPN) input, with channel isolation and noise immunity, ideal for high-density input applications in remote field locations, such as oil and gas pipelines, water treatment plants, and mining operations.
  • Technical Specifications:
    • Input Channels: 32 independent channels, sink (NPN) configuration, 24 VDC input.
    • Input Voltage: 24 VDC (18-30 VDC range), input current 5 mA per channel.
    • Isolation: 2500 VAC between channels and backplane, 1500 VAC between channels.
    • Response Time: ≤1 ms (on/off), ensuring fast signal detection.
    • Noise Immunity: ±2 kV surge protection, CMRR ≥120 dB.
    • Power Supply: 24 VDC from Momentum base module, power consumption ≤5 W.