Others

You are here:
  1. Home
  2. Others
  3. Page 89

AEG NW-BP85-002 Series PLC Battery Backup Module

  • Product Introduction: This is a dedicated PLC battery backup module of AEG's NW-BP85 series with the model NW-BP85-002, 3.6 V rated voltage and 1800 mAh rated capacity, designed for providing uninterrupted power supply for AEG Modicon 800/850 series PLC CPU modules' RAM memory and real-time clock (RTC) when the main power is cut off. It adopts a high-capacity lithium manganese dioxide battery, plug-and-play dedicated connector, and long service life, ensuring that the PLC program, process data and RTC are not lost during power failure, and is an essential accessory for AEG Modicon 800/850 series PLC systems to ensure data retention.
  • Technical Specifications:
    • Battery Type: Lithium manganese dioxide battery (Li-MnO2), non-rechargeable, maintenance-free, high energy density.
    • Rated Parameters: 3.6 V nominal voltage, 1800 mAh rated capacity (20°C, 0.2 C discharge), open circuit voltage ≤3.9 V.
    • Backup Time: ≥1500 hours for PLC RAM + RTC power supply at 25°C, ≥800 hours at 40°C (high temperature derating).
    • Service Life: ≥4 years at 25°C (normal working condition), ≥2 years at 40°C, storage life ≥1 year (25°C, unopened).

AEG 110-CPU-612-03 Series Compact PLC CPU Module

  • Product Introduction: This is a compact PLC CPU module of AEG's 110 series with the model 110-CPU-612-03, with 6k program steps and 24 VDC power supply, designed for small-scale industrial control systems and standalone equipment control. It integrates a built-in digital I/O, high-speed counter, and RS-232 communication port, adopting a compact structural design and high-performance industrial processor, with strong expandability and reliable operation, and is a core control component for small-scale automation control such as single-machine equipment, small production lines and municipal small facilities.
  • Technical Specifications:
    • Processor: 16-bit industrial low-power RISC processor, operating frequency 40 MHz, dedicated for PLC control logic processing.
    • Program Memory: 6k user program steps (Flash memory, non-volatile), data memory 1k words (RAM, battery backup).
    • Built-in I/O: 12 digital inputs (24 VDC NPN), 8 digital outputs (24 VDC PNP), 1 high-speed counter (10 kHz, up/down).
    • Communication Interface: 1×RS-232 (Modbus RTU/AEG dedicated protocol), transmission rate 300-115200 bps, support HMI and programming terminal connection.

AEG 92-00688-01 Series Industrial Grade Solenoid Valve Coil

  • Product Introduction: This is a 24 VDC industrial grade solenoid valve coil of AEG's 92 series with the model 92-00688-01, rated power 10 W, specially designed for matching AEG industrial solenoid valves in industrial fluid control systems. It adopts a high-efficiency electromagnetic core structure, epoxy resin encapsulation, and IP65 protection rating, with low power consumption, strong anti-vibration performance and good sealing performance, and is a core driving component for AEG solenoid valves in fluid control systems such as pneumatic and hydraulic control.
  • Technical Specifications:
    • Rated Voltage: 24 VDC ±10%; Rated Power: 10 W; Coil Resistance: 57.6 Ω (at 20°C); Rated Current: 417 mA.
    • Electromagnetic Structure: Closed magnetic circuit core, high magnetic permeability silicon steel sheet, electromagnetic force ≥8 N at rated voltage.
    • Encapsulation Material: Epoxy resin vacuum encapsulation, high temperature resistance, moisture resistance and anti-vibration.
    • Protection Rating: IP65 (dustproof and water jet proof); Insulation Class: Class B (130°C), insulation resistance ≥100 MΩ at 500 V DC.

AEG 43506698 Industrial Grade Thermal Overload Relay

  • Product Introduction: This is an adjustable industrial grade thermal overload relay of AEG with the model 43506698, with a rated current adjustment range of 1-1.6 A, designed for overload and phase failure protection of small-power three-phase/asynchronous motors in industrial control systems. It adopts a bimetallic strip thermal sensing structure, manual/automatic reset, and phase failure protection function, with high protection accuracy and reliable action, and is a core motor protection component for small-power motor control in industrial automation systems such as fans, pumps and conveyors.
  • Technical Specifications:
    • Rated Current Adjustment Range: 1 A to 1.6 A (continuous adjustable), rated operating current 1.6 A (at 40°C).
    • Protection Functions: Motor overload protection, phase failure protection, thermal imbalance protection, manual/automatic reset optional.

AEG 7628-000249627 Industrial Grade PLC Backplane Bus Cable

  • Product Introduction: This is a 5-meter 25-core industrial grade PLC backplane bus extension cable of AEG with the model 7628-000249627, specially designed for the extension and connection of AEG Modicon PLC chassis backplane bus. It adopts high-purity oxygen-free copper conductor, double-shielded structure, and industrial-grade gold-plated connectors, with low signal attenuation, strong anti-interference performance and stable connection, and is a dedicated transmission cable for realizing multi-chassis expansion and long-distance bus connection of AEG Modicon PLC systems.
  • Technical Specifications:
    • Core Quantity: 25 core, single core stranded conductor, independent insulation for each core, color-coded for easy wiring.
    • Conductor Material: High-purity oxygen-free copper (OFC), conductor cross-section 0.2 mm², resistance ≤95 Ω/km at 20°C.
    • Shielding Structure: Double shielding (aluminum foil shielding + tinned copper braid shielding), shielding coverage ≥95%, anti-interference attenuation ≥90 dB at 1 MHz.
    • Insulation Material: FEP fluoroplastic, high temperature resistance, low dielectric loss, insulation resistance ≥100 MΩ at 500 V DC.
    • Sheath Material: PUR polyurethane, oil-resistant, wear-resistant, anti-tear, IP65 protection rating for the cable body, -40°C to +80°C temperature resistance.

AEG A332-03 Series Industrial Grade Intermediate Relay

  • Product Introduction: This is a 3-pole double-throw (3PDT) industrial grade intermediate relay of the AEG A332 series, with 24 VDC low-voltage coil, designed for signal isolation, amplification and conversion in industrial control systems. It adopts a high-sensitivity electromagnetic coil, silver alloy contact, and flame-retardant plastic enclosure, with high contact capacity, long service life and strong anti-vibration performance, and is an essential intermediate control component for connecting PLC low-current output signals and high-current field actuators in industrial control systems.
  • Technical Specifications:
    • Contact Configuration: 3 pole double throw (3PDT), 3 normally open (NO) + 3 normally closed (NC) contacts, independent contact action.
    • Coil Parameter: 24 VDC rated voltage, coil resistance 144 Ω, rated current 167 mA, power consumption 4 W, insulation resistance ≥100 MΩ.
    • Contact Capacity: AC 250 V / 10 A (resistive load), AC 250 V / 5 A (inductive load), DC 30 V / 5 A (resistive load); Mechanical life ≥100 million times, electrical life ≥1 million times.
    • Switching Time: Operate time ≤15 ms, release time ≤10 ms; Vibration Resistance: 10-55 Hz, 1.5 mm amplitude (IEC 60068-2-6).

AEG AM-C916-100 Series 16-Channel Digital Output Module

  • Product Introduction: This is a 16-channel 24 VDC digital output module of the AEG AM-C916 series, dedicated to AEG Modicon 900 series medium and large PLC systems, designed for driving industrial field 24 VDC digital actuators such as solenoid valves, relays, indicator lights and contactors. It adopts PNP sourcing output design, high-current output per channel, and built-in overcurrent and short-circuit protection, converting PLC digital control signals into on-site driving signals, and is a core output module for medium and large industrial control systems with multi-channel digital output requirements.
  • Technical Specifications:
    • Output Channels: 16 independent 24 VDC digital output channels, divided into 4 common groups of 4 channels each, independent power supply per group.
    • Output Type: PNP sourcing output, high-side switching, compatible with most 24 VDC industrial digital actuators.
    • Rated Output Voltage: 24 VDC ±15%; Rated Output Current: 2 A per channel, 8 A per common group, peak current 5 A (100 ms).
    • Switching Time: ≤1 ms (on/off); Output Load: Resistive, inductive, capacitive load, inductive load suppression built-in freewheeling diode.
    • Protection Functions: Per-channel short-circuit protection, overcurrent protection, reverse polarity protection, all protection functions self-recovering.

AEG ALUMINIUM152 Series Heavy-Duty Aluminum Alloy Terminal Block

  • Product Introduction: This is a 1-pole heavy-duty industrial grade aluminum alloy terminal block of the AEG ALUMINIUM152 series, designed for the connection of large-section aluminum alloy cables in industrial high-power power distribution and control systems. It adopts a thickened aluminum alloy conductor, double screw compression clamping structure, and high-strength flame-retardant insulation shell, with high current carrying capacity, strong connection stability and good anti-oxidation performance, and is a core connection accessory for large-section aluminum cable wiring in industrial heavy-duty power distribution systems.
  • Technical Specifications:
    • Pole Quantity: 1 heavy-duty pole, double-wire parallel connection design (in/out), support two same-section cables connection.
    • Conductor Material: Thickened high-purity aluminum alloy (6061-T6), surface with electroplated nickel anti-oxidation treatment, contact resistance ≤30 μΩ.
    • Insulation Material: BMC unsaturated polyester resin, UL94 V-0 flame retardant grade, CTI ≥650 V, anti-fracture and high temperature resistance.
    • Rated Voltage: 1000 V AC/DC; Rated Current: 150 A (at 40°C), derating to 120 A at 70°C.
    • Cable Range: Aluminum alloy cable 50 mm² to 150 mm², compatible with copper cable 35 mm² to 120 mm² (copper-aluminum transition).

AEG ALU202 Series Industrial Grade Aluminum Alloy Terminal Block

  • Product Introduction: This is a 2-pole industrial grade aluminum alloy terminal block of the AEG ALU202 series, specially designed for the connection of aluminum alloy cables in industrial power distribution and control systems. It adopts a special aluminum alloy conductor clamping structure, anti-oxidation surface treatment, and flame-retardant insulation shell, solving the problems of aluminum cable oxidation, poor contact and large contact resistance in traditional connections, and is a professional connection accessory for aluminum alloy cable wiring in industrial high-current power distribution systems.
  • Technical Specifications:
    • Pole Quantity: 2 independent poles, single-pole single-wire connection design, no mutual interference between poles.
    • Conductor Material: High-purity aluminum alloy (6063-T5), surface with electroplated tin anti-oxidation treatment, contact resistance ≤50 μΩ.
    • Insulation Material: PA66 flame-retardant engineering plastic, UL94 V-0 flame retardant grade, CTI ≥600 V, high temperature resistance.
    • Rated Voltage: 1000 V AC/DC; Rated Current: 95 A (at 40°C), derating to 76 A at 70°C.
    • Cable Range: Aluminum alloy cable 16 mm² to 95 mm², compatible with copper cable 10 mm² to 70 mm² (copper-aluminum transition).

AEG S975-000 Series High-Performance PLC Chassis

  • Product Introduction: This is a 10-slot industrial-grade PLC chassis of the AEG S975 series, engineered as the core hardware carrier for AEG Modicon medium-sized PLC systems, providing a standardized backplane bus and power distribution for various I/O modules, communication modules, and functional modules. It adopts a rugged metal enclosure design, high-speed backplane bus architecture, and redundant power supply support, ensuring stable and reliable operation of the entire PLC system in harsh industrial environments, and is a key infrastructure component for building medium-scale industrial control systems.
  • Technical Specifications:
    • Slot Quantity: 10 standard I/O slots, compatible with all AEG Modicon 800/900 series modular PLC modules.
    • Backplane Bus: High-speed parallel bus, transmission rate 10 Mbps, support real-time data exchange between modules.
    • Bus Isolation: 2500 VAC electrical isolation between backplane bus and external circuits, anti-interference attenuation ≥80 dB at 1 MHz.
    • Power Supply Interface: Dual 24 VDC power input (redundant design), support hot swap of power supply modules, input current ≤10 A.
    • Enclosure Material: Cold-rolled steel sheet with electrostatic spraying, IP20 protection rating, anti-corrosion and anti-vibration.
    • Mounting Method: Standard 35mm DIN rail mounting + panel mounting, double fixed for industrial site stability.

AEG AS-BDAP-21 High-Precision Single-Channel Analog Output Module

  • Product Introduction: This is a high-precision single-channel 12-bit analog output module of the AEG Modicon series, designed for converting the digital control signal output by the PLC CPU into a high-precision standard analog voltage/current signal to drive a single industrial field precision actuator such as electric regulating valves and precision frequency converters. It features high conversion accuracy, low signal drift and strong driving capacity, and is a core module for high-precision single-channel analog control in industrial process control systems that require precise regulation of a single process parameter.
  • Technical Specifications:
    • Output Channel: 1 independent high-precision analog output channel, dedicated to single signal output.
    • Output Signal Types: 4-20 mA DC current, 0-10 VDC voltage (software configurable, seamless switching).
    • Resolution: 12-bit; Output Accuracy: ±0.05% of full scale at 25°C, ±0.1% over the entire operating temperature range.
    • Signal Drift: ≤20 ppm/°C (temperature drift), ≤0.01% FS/year (time drift), ultra-low drift for long-term stable output.
    • Output Load Capacity: Current output ≤500 Ω, voltage output ≥1 kΩ, strong driving capacity for field actuators.

AEG BM85S232 Industrial RS-232 Serial Communication Module

  • Product Introduction: This is a dedicated industrial RS-232 serial communication module of the AEG BM85 series, designed for realizing RS-232 serial communication between AEG Modicon PLC systems and various RS-232 standard equipment such as programming terminals, HMIs, printers and barcode scanners. It features industrial-grade electrical isolation, strong anti-interference performance and stable communication, and converts the PLC backplane bus signal into standard RS-232 serial signal, serving as a core communication accessory for the connection between Modicon PLC systems and RS-232 peripheral equipment.
  • Technical Specifications:
    • Communication Standard: RS-232C (EIA/TIA-232), support full-duplex communication.
    • Communication Interface: DB9 female connector (standard RS-232 interface), with screw locking structure for firm connection.
    • Transmission Rate: 300 bps-115200 bps, software configurable, adaptive baud rate.
    • Transmission Distance: Up to 15 meters, in line with RS-232 standard transmission distance.
    • Data Format: 7/8 data bits, 1/2 stop bits, odd/even/no parity, all software configurable.