GE

You are here:
  1. Home
  2. GE
  3. Page 49

GE 55A213937P630B

Product Name:​ GE Mark VI Central Processing Board (32-bit RISC)
Introduction:​ The primary logic solver of a Mark VI control cabinet, executing turbine sequencing, protection, and control loops.
Technical Specifications:
  • CPU:​ 32-bit RISC, 133 MHz

GE SSF2G5X2U000000

Product Name:​ GE Single-Channel Solid-State DC Driver Module (Excitation System)
Introduction:​ A forced-air-cooled power converter that transforms a 4–20 mA control signal from an AVR into high-current DC for generator rotor excitation.

GE IS230TCISH7C

Product Name:​ GE Mark VI High-Density Thermocouple Interface Terminal Board
Introduction:​ A signal-conditioning and wiring terminal board for Mark VI/Mark VIe turbine exhaust, bearing, and casing thermocouples.
Technical Specifications:
  • Channels:​ 24 configurable thermocouple inputs (typical build)

GE TC4040SSHE1

Product Name:​ GE Series 90-30 Field Wiring Terminal Block (Mark V/VI compatible)
Introduction:​ A shielded barrier-terminal interface panel linking cabinet field wires to 90-30 I/O modules or Mark V/VI termination cards.

GE DS3820PSCC1D1

Product Name:​ GE Speedtronic Mark VI Serial Communication Module
Introduction:​ A VME-based interface board providing two independent serial channels for data exchange between a Mark VI turbine controller and external intelligent devices such as PLCs, meters, drives, and HMI.

GE IS210MVRCH1A

Product Name​
GE IS210MVRCH1A MVRC High-Voltage Relay Control and Excitation Regulator Assembly
Product Introduction​
The GE IS210MVRCH1A is a Process Wiring Assembly (PWA) combining the IS200MVRC baseboard and IS200HSLA high-speed serial link board. It functions inside Mark VI / Mark VIe C-core racks as the excitation voltage regulator and high-voltage relay controller for EX2100 static exciter systems.

GE DGP54BACA

Product Name​
GE DGP54BACA Digital Generator Protection Relay
Product Introduction​
The GE DGP54BACA is a microprocessor-based generator protection, metering, and control relay from the GE Multilin DGP54 series. It consolidates the full protection suite for medium and large synchronous generators in one 160 mm panel device.

GE DS200CTBAG1ADD

Product Name​
GE DS200CTBAG1ADD Control Terminal Board (CTBA)
Product Introduction​
The GE DS200CTBAG1ADD is a high-density signal termination and routing board belonging to the Mark V Speedtronic control family. It bridges controller backplane logic with field wiring for analog, digital, relay, and communication circuits in turbine control cabinets.

GE DS215UCIBG3A

Product Introduction​
The GE DS215UCIBG3A is a central processing and interface motherboard developed by General Electric for the Mark V Speedtronic turbine control platform. It acts as the primary computational hub in both Simplex and Triple Modular Redundant (TMR) gas turbine and steam turbine control architectures, coordinating data exchange between the host CPU, flash storage, Genius I/O network, and auxiliary control boards.

GE THPR3612G3TRT1

  • Product Description:​ A high-precision, through-bolt type current transformer designed for revenue metering and advanced protective relaying in high-voltage substations.
  • Technical Specifications:​ Ratio: 3600:5 A. Accuracy Class: 0.3 (Metering) / 5P20 (Protection). Rated insulation level: 36 kV. Frequency: 50/60 Hz.

GE IS2020RKPSG2A

  • Product Description:​ A 400-watt power supply module specifically designed for the VME (Versa Module Europa) rack backplane used in GE Mark VI control systems.
  • Technical Specifications:​ Input: 125 VDC nominal. Outputs: +5 V @ 60A, +15 V @ 5A, -15 V @ 5A, and a dedicated 335 VDC output for flame detection scanners.

GE DS200VPBLG1AFF

  • Product Description:​ A power distribution and interface board that provides regulated DC power to various boards within a GE drive or control cabinet.
  • Technical Specifications:​ Converts 125 VDC or 230 VAC input into regulated +5 V, +15 V, and -15 V outputs. Total power capacity of 300 Watts.