GE

You are here:
  1. Home
  2. GE
  3. Page 26

GE TKC36800M

Product Name:​ GE TK Series 800 A 3-Pole Molded-Case Circuit Breaker
Product Introduction:​ The GE TKC36800M is a heavy industrial molded-case breaker from GE’s TK frame line, used as main or feeder disconnect in 600 V switchboards, MCCs, and turbine auxiliary panels.

GE DS3800HAIC1A1A

Product Name:​ GE Speedtronic Mark IV High-Speed Analog Current Input Board (HAIC)
Product Introduction:​ The GE DS3800HAIC1A1A is a Mark IV regulator-class analog input board that feeds turbine control logic with 4–20 mA and 0–5 V process values under TMR architecture.

GE IS220PRTDH1A

Product Name:​ GE Mark VIe RTD Input Module (PRTD)
Product Introduction:​ The GE IS220PRTDH1A is a Mark VIe distributed I/O module that reads resistance temperature detectors and resistance-input transmitters for bearing, winding, and exhaust temperature monitoring.

GE IS230TPROH2C

Product Name:​ GE Mark VI / Mark VIe TPRO Analog I/O Terminal Board
Product Introduction:​ The GE IS230TPROH2C is a passive signal-conditioning and termination board belonging to the VPRO (Vibration Protection and Overspeed) family, used to scale LVDT, thermocouple, and 4–20 mA signals for the turbine protection processor.

GE DS3820MAUD1A1A

Product Name:​ GE Speedtronic Mark V / Mark VI Mixed Analog & Digital I/O Module (MAUD)
Product Introduction:​ The GE DS3820MAUD1A1A is a hybrid I/O board developed by General Electric for the Speedtronic Mark V and Mark VI turbine control platforms. It acquires analog process signals and handles discrete logic for gas turbine, steam turbine, and generator auxiliary systems.

GE IS200VTCCH1

Product Name:​ Mark VI Thermocouple Input Module (VTCC)
Introduction:​ High‑accuracy thermocouple acquisition module for exhaust gas temperature (EGT) monitoring on gas turbines.
Technical Specifications:
  • Channels:​ 12 differential TC inputs

GE 942D365‑0

Product Name:​ Generic GE Industrial Interface / Signal Conditioning Board
Introduction:​ Broad‑use control board found in auxiliary panels, compatible with 90‑30/90‑70 and third‑party PLC via fieldbus.
Technical Specifications:
  • Interfaces:​ RS‑485, CANopen

GE 218A4293P630B

Product Name:​ 5.5 kV Medium‑Voltage Current‑Limiting Power Fuse
Introduction:​ GE 218‑series expulsion/current‑limiting fuse for MV switchgear and transformer protection.
Technical Specifications:
  • Rated Voltage:​ 5.5 kV (5500 V)

GE IS200ITBAG1A

Product Name:​ Mark VI DC Drive Terminal Board (ITBA)
Introduction:​ Mark VI interface board terminating high‑current DC drive power and feedback lines to controller.
Technical Specifications:
  • Signals:​ Armature voltage, armature current, field current, tach, enable/interlock

GE 0996D957G0001

Product Name:​ Mark V Serial Communication Interface Module (COMM)
Introduction:​ Asynchronous serial gateway enabling Mark V controller to talk Modbus, SRTP, DNP3 with external SCADA/HMI/meters.
Technical Specifications:
  • Ports:​ 1× RS‑232 DB9, 1× RS‑485 screw terminal

GE DS200TBCBG1AAA

Product Name:​ Mark V RTD / 4–20 mA Input Termination Board (TBCB)
Introduction:​ Field wiring termination and signal pre‑conditioning board for resistance thermometers and current transmitters in Mark V systems.

GE IS220PSVOH1BB

Product Name:​ Mark VIe Servo Valve Position I/O Pack (PSVO)
Introduction:​ Electro‑hydraulic servo interface pack for precise fuel and steam valve positioning using LVDT/RVDT feedback.
Technical Specifications:
  • Servo Loops:​ 2 independent WSVO channels