GE

You are here:
  1. Home
  2. GE
  3. Page 15

GE TED134150

Product Name:​ GE E150 Frame Molded Case Thermal-Magnetic Circuit Breaker
Product Introduction:​ A 3-pole, 150 A thermal-magnetic molded case circuit breaker from GE's E150 product line, providing reliable overcurrent and short-circuit protection for commercial and industrial power distribution.
Technical Specifications:
  • Product Line:​ Thermal Magnetic

GE 6KP1123075X9B1

Product Name:​ GE 6KP Series 6-Pulse Thyristor (SCR) Power Module
Product Introduction:​ A high-power silicon-controlled rectifier module for industrial power electronic conversion, used in rectifiers, variable-frequency drives, soft starters, and DC drive systems for power transformation.
Technical Specifications:
  • Module Type:​ 6-pulse thyristor bridge (three-phase full-controlled bridge)

GE 7556D26G1

Product Name:​ GE Multilin 7556D Voltage & Reactive Power Control Relay (Base Version)
Product Introduction:​ The base-configuration variant of the 7556D series, sharing the same hardware platform as the G2 version but with standard communication configuration and firmware differences. Suited for standard voltage/reactive power control needs in medium- and low-voltage distribution networks for capacitor bank switching and transformer tap adjustment.

GE 7556D26G2

Product Name:​ GE Multilin 7556D Voltage & Reactive Power Control Relay
Product Introduction:​ A voltage and reactive power integrated control relay designed for substation automation, performing automatic voltage regulation (AVR) and reactive power compensation management in power transmission and distribution networks.

GE 173C8413ADG01

Product Name:​ GE Mark V/VI Analog Input Module (AI)
Product Introduction:​ An analog input board for GE Mark V and Mark VI Distributed Control Systems (DCS), used to acquire field analog signals (such as 4–20 mA and 0–10 V) and convert them into digital values for processing by the main controller.
Technical Specifications:
  • Module Type:​ 8-channel analog input (configuration-dependent)

GE DS3800NLCB1L1G

Product Name:​ GE Fanuc DS3800 Series Control Module
Product Introduction:​ This module belongs to GE's Speedtronic / Mark series control board family, designed for high-speed and reliable control functions in turbine and industrial automation systems.
Technical Specifications:
  • Series:​ DS3800

GE CR306F003

Product Name:​ GE CR306 Series Non-Reversing Magnetic Motor Starter
Product Introduction:​ A three-pole, NEMA Size 4 non-reversing magnetic motor starter with thermal overload protection, designed for starting and stopping three-phase industrial motors.
Technical Specifications:
  • Manufacturer:​ GE (now supported under ABB's 300 Series)

GE IC2812B107BA

Product Name:​ GE IC2800 Series Motor Field Contactor
Product Introduction:​ This is a replacement motor field contactor from the GE IC2800 family, designed for switching and controlling field circuits in industrial motor control applications.
Technical Specifications:
  • Type:​ Replacement Motor Field Contactor

GE 44A963225-G04

Product Name:​ GE Mark VI / Mark VIe Control System Printed Circuit Board Assembly (PCB Assembly)
Product Introduction:​ The 44A963225-G04 is a core printed circuit board assembly used in GE's Mark VI / Mark VIe Speedtronic gas turbine and steam turbine control systems. It resides inside the control cabinet as a key functional card, undertaking specific signal processing, logic operations, or communication protocol conversion tasks. Some distributors also list it under the "Fanuc / GE Fanuc" power supply category.

GE DDM-0199101-1523

Product Name:​ Model 1523 True RMS Wattmeter (with RS-232 Communication Interface & Special Auto-Scan Function)
Product Introduction:​ The DDM-0199101-1523 is referenced as a Model 1523 instrument. Note: No GE-official standalone webpage was found confirming this exact full material number; the available technical datasheet corresponds to the "Model 1523 True RMS Wattmeter". It is a precision electrical measuring instrument.

GE DS3815CCMD1B1B

Product Introduction:​ The DS3815CCMD1B1B is a circuit-board module within GE's Speedtronic drive and turbine control product family. Based on its DS3815 prefix it belongs to GE's Mark VI/Mark VIe control I/O series, used for data exchange and status monitoring between the control system and host computers, DCS, or other control systems. Publicly available detailed official datasheets for this exact part number are limited; the following parameters are compiled from industrial supplier documentation and should be confirmed against GE's original drawings or the nameplate before deployment.

GE SR737-5-5-HI-485

Product Name:​ GE Multilin SR737 Digital Feeder/Overcurrent Protection Relay
Product Introduction:​ The SR737 is a digital feeder protection relay developed by GE Grid Solutions for primary circuit protection on distribution networks at any voltage level, and can also serve as backup protection for transformers and transmission lines. In the specific model "SR737-5-5-HI-485", "5-5" denotes 5 A CT input / 5 A CT secondary rated current, "HI" indicates a high-impedance type suitable for long-cable CT circuits, and "485" denotes an RS-485 communication interface.