Digital guide
You are here:
GE 703-1253
Product Name: GE Fanuc 703-1253 8-Channel Analog Input Module
Product Overview: The 703-1253 is an 8-channel analog input module for the GE Fanuc Series 90-30 PLC system. It is used to collect field 4-20 mA current signals or 0-10 V voltage signals, converting continuously varying physical quantities (temperature, pressure, flow, liquid level, etc.) into digital values that can be processed by the PLC. It is widely used in process control systems.
Detailed content
Technical Specifications:
- Brand: GE Fanuc
- Model: 703-1253
- Series: Series 90-30
- Channels: 8 channels (independent inputs)
- Input Signal Types: 4-20 mA DC (2-wire/4-wire) / 0-10 V DC / 0-5 V DC (selectable via jumper or software configuration)
- Resolution: 12-bit (4096 levels)
- Conversion Accuracy: ±0.1% of full scale (typical)
- Sampling Rate: Approximately 2 ms per channel (all 8 channels sampled synchronously)
- Isolation: Channel-to-channel isolation, channel-to-ground isolation, 500 VDC
- Common Mode Rejection Ratio (CMRR): ≥ 80 dB @ 50 Hz
- Supply Voltage: 24 VDC (bus-powered)
- Power Consumption: Approximately 3 W
- Front Panel: 8-channel configuration LED status indicators
Functional Features:
- Supports 4-20 mA two-wire sensor direct power supply (module provides 24 V loop power)
- Channel-to-channel isolation to avoid inter-channel crosstalk
- Software-configurable range scaling and engineering unit conversion
- Supports wire-break detection function; outputs preset alarm value upon wire break
- Front-panel LEDs display data valid status for each channel
Structural Features:
- Standard Series 90-30 module dimensions
- Front Panel: 8-bit LED indicators, input type selection DIP switch
- Bottom: Genius bus connector
- Terminals: 8 groups of independent terminal blocks, supporting both screw compression and spring clamp methods
- Housing Material: Flame-retardant engineering plastic (UL94 V-0)
Installation Requirements:
- Install in Series 90-30 rack
- For 4-20 mA two-wire wiring, the module provides 24 V loop power, and the sensor is connected in series
- For voltage signal input, use shielded twisted pair cable
- Terminal maximum conductor size: 14 AWG (2.08 mm²)
- Maintain at least one empty slot between multiple modules for heat dissipation
Usage Notes:
- 4-20 mA input must never be open-circuited, otherwise it will cause abnormal readings
- Voltage input has high impedance; wiring should be kept away from strong electromagnetic interference sources
- Perform zero and full-scale calibration regularly to ensure accuracy
- Operating environment temperature: 0°C ~ 60°C
- Storage temperature: -40°C ~ 85°C
Application Industries: Chemical process control, petroleum refining, power boiler control, water treatment, pharmaceuticals, food processing.
