GE

You are here:
  1. Home
  2. GE
  3. Page 35

GE L90H00HCHF8FH6PL6PNXXSXXUXXW7J

Product Name:​ GE Multilin L90 Line Current Differential Relay (UR Series)
Product Introduction:​ The GE L90 (ordered as L90H00HCHF8FH6PL6PNXXSXXUXXW7J) is a high-end line current differential protection relay in GE's Universal Relay family. It is intended for transmission lines and cables of different voltage levels, providing reliable and secure operation even under the worst-case power system conditions.

GE T60H00HCHF8HH6PM8HP6PUXXWXX

Product Name:​ GE Multilin T60 Transformer Protection Relay (UR Series)
Product Introduction:​ The T60 is a transformer protection system in GE's Universal Relay (UR) family. The ordered model T60H00HCHF8HH6PM8HP6PUXXWXX is configured for transformer protection applications. It delivers high-speed differential protection with advanced fault detection and integrates overcurrent, overvoltage, and thermal protection functions to prevent transformer damage under abnormal conditions.

GE 246B2323AAG02

Product Name:​ GE Multilin 246B Digital Feeder Protection Relay
Product Introduction:​ The GE 246B2323AAG02 is a digital feeder protection relay in the GE Multilin 246B series (under GE Grid Solutions). It is primarily deployed for the protection of medium-voltage feeders and distribution transformers, integrating overcurrent, differential, and earth-fault protection functions. It serves as a core protection device in distribution automation systems.

GE TSVG620B

Product Name:​ TSVG Series Dry-Type Power Transformer
Product Introduction:​ The GE TSVG620B is a 620 kVA three-phase epoxy-cast dry-type transformer in the TSVG product family. It is intended for indoor power distribution applications in commercial buildings, data centres, hospitals, and industrial facilities. The designation "TSVG" identifies the dry-type transformer series; "620" denotes the 620 kVA rating; "B" denotes a specific configuration variant.

GE TKMA31000

  • Product Name: GE TKMA31000 1000 A, 3-Pole Thermal-Magnetic Molded Case Circuit Breaker (MCCB)
  • Product Introduction: The GE TKMA31000 is a 3-pole, 1000 A molded case circuit breaker in GE's TKM (K-Frame) family. It provides robust overcurrent and short-circuit protection in heavy-duty commercial and industrial power distribution systems.

GE IS200VCMIH2B

  • Product Name: GE IS200VCMIH2B Mark VI VME Communications Interface Board (VCMI)
  • Product Introduction: The IS200VCMIH2B is a VME Communications Interface (VCMI) board developed for the GE Mark VI turbine control system. It is installed in the Central Control Module and provides internal communication between I/O boards in the rack and communication with other control or protection modules through the IONet network.

GE 7556D10G1

  • Product Name: GE 7556D10G1 Mark V Control System Power Supply & Distribution Board
  • Product Introduction: The 7556D10G1 is a fundamental power management component within the GE Speedtronic Mark V gas turbine control system. It converts the primary station power into the stabilized low-voltage DC rails required by the control rack's logic processors and I/O cards.

GE IS215UCVHM09C

  • Product Name: GE IS215UCVHM09C Mark VIe Universal Controller Board (UCVH)
  • Product Introduction: The IS215UCVHM09C is a VME-based universal controller board for the GE Mark VIe Speedtronic turbine control system. It processes control logic, manages I/O, and handles communication, and supports both Simplex and Triple Modular Redundant (TMR) configurations.

GE B216LSIG

  • Product Name: GE B216LSIG MVT Plus Solid State Programmer (LSIG) for Power Break II
  • Product Introduction: The B216LSIG is a MicroVersaTrip Plus (MVT Plus) solid-state electronic trip programmer manufactured by GE for use with Power Break II air circuit breakers. It provides Long-Time, Short-Time, Instantaneous, and Ground-Fault (LSIG) protection functions.

GE DS200TCEAG1B

  • Product Name: GE DS200TCEAG1B Mark V Emergency Overspeed and Flame Detection Processor Board (TCEA)
  • Product Introduction: The DS200TCEAG1B is a P1 Protective Core board for the GE Speedtronic Mark V system. It is an independent safety processor executing overspeed trip and flame-loss trip logic outside the main control loop and IONET network.
  • Technical Specifications:
    • Series: Mark V / Speedtronic / DS200

GE IS200TBQDH1A

  • Product Name: GE IS200TBQDH1A Mark VIe Turbine Bearing Temperature Input Module (TBQD)
  • Product Introduction: The IS200TBQDH1A is the turbine bearing temperature input module for the GE Mark VIe distributed control system, providing dedicated, high-accuracy temperature monitoring for turbine bearings.
  • Technical Specifications:
    • System compatibility: Mark VIe, Mark VIeS

GE IS200TBQGH2A

  • Product Name: GE IS200TBQGH2A Terminal Board (Mark VI / Mark VIe Speedtronic)
  • Product Introduction: The IS200TBQGH2A is a General Electric PCB termination module within the Mark VI Speedtronic series, used as a high-density field termination and signal interface board for turbine control systems.
  • Technical Specifications:
    • Brand / Series: General Electric, Mark VI / Mark VIe Speedtronic