Digital guide

You are here:
  1. Home
  2. GE
  3. GE IS215UCVHM09C

GE IS215UCVHM09C

  • Product Name: GE IS215UCVHM09C Mark VIe Universal Controller Board (UCVH)
  • Product Introduction: The IS215UCVHM09C is a VME-based universal controller board for the GE Mark VIe Speedtronic turbine control system. It processes control logic, manages I/O, and handles communication, and supports both Simplex and Triple Modular Redundant (TMR) configurations.
WhatApp
WeChat

Detailed content

  • Technical Specifications:
    • Series: Mark VIe Speedtronic
    • Board type: VME Controller Board (UCVH)
    • Processor: Ultra Low-Voltage Intel Celeron 650 MHz
    • Memory: 128 MB SDRAM; 128 MB Flash
    • Communication: Ethernet (IONet), PROFIBUS-DP (Simplex), RS-232, RS-485
    • Connectors: SVGA monitor port, 2 × Ethernet ports, COM ports, multi-pin VME connectors
    • Faceplate: Reset switch, status LEDs, SVGA, Ethernet, COM ports
    • Power: 24 V DC or 125 V DC (supplied by Mark VIe system)
    • Signal protection: EMI shielding, surge suppression
    • Conformal coating: Yes (environmental protection)
    • Board markings: GE logo, IS215UCVHM09C, 6BA01 code
    • Operating temperature: –30 °C to +65 °C (–22 °F to +149 °F)
    • Storage temperature: –40 °C to +85 °C
    • Humidity: 5 % to 95 % (non-condensing)
    • Dimensions: Standard VME, ~23.4 cm × 16 cm (9.2 × 6.3 in.)
    • Weight: ~0.5 kg
    • Mounting: Single slot in Mark VIe VME rack
    • Certifications: CE, UL, CSA, Class I Div 2
    • Reference manual: GEH-6721L
  • Functional Features: Executes control logic; manages I/O data exchange; facilitates IONet communication; supports Simplex and TMR redundancy; works with ToolboxST configuration software; surface-mount construction.
  • Application Scenarios: Power generation, oil & gas, and renewable energy turbine control — ensuring reliable and efficient turbine operation in critical applications.
  • Installation Requirements: Install in a single VME slot in the Mark VIe rack; connect 24 V DC or 125 V DC system power; attach IONet Ethernet cabling per system architecture (Simplex or TMR).
  • Usage Notes: Confirm the complete part number and 6BA01 code matches the system BOM; verify IONet network topology (Simplex vs. TMR) before installation; use ToolboxST for configuration and firmware management.

You may also like