GE

You are here:
  1. Home
  2. GE
  3. Page 45

GE SGLA36AT0600

Product Name:​ GE Spectra RMS™ Electronic Trip Molded-Case Circuit Breaker (SG600 Frame)
Introduction:​ A digitally controlled, solid-state RMS-sensing molded-case circuit breaker from GE's Spectra RMS series. The electronic trip unit uses digital sampling to determine the true RMS value of sinusoidal and non-sinusoidal load currents, providing precise, adjustable protection. A field-installable, front-mounted rating plug establishes or changes the breaker's ampere rating.

GE 750-P5-G5-S5-HI-A20-R-E-H

Product Name:​ GE 750 Series Feeder Management / Overcurrent Protection Relay (SR750)
Introduction:​ A high-performance electrical protection relay from GE's 750-series transformer and feeder protection system. It monitors phase current, zero-sequence current, and sensitive ground current, and provides comprehensive overcurrent protection, metering, and I/O for medium-voltage distribution systems.

GE 173C8989AEG01

Product Name:​ GE Speedtronic Mark V/VI Gas Turbine Control I/O Module
Introduction:​ This module is used in GE's Speedtronic Mark V and Mark VI gas turbine control systems to acquire field sensor signals and output control commands to actuators.

GE DS3820MSAB1A1A

Product Name:​ GE High-Speed Drive I/O and Communication Module
Introduction:​ Interface module bridging GE drives to control network with mixed digital I/O and real-time Ethernet.
Technical Specifications:
  • ARM Cortex-M4 @ 200 MHz

GE DS3800HCMC1A1B

Product Name:​ GE Speedtronic Mark IV Central Main Control Module
Introduction:​ Primary redundant controller CPU board for Mark IV gas/steam turbine control systems.
Technical Specifications:
  • Motorola 68020 processor

GE SSF2G5X3U000000

Product Name:​ GE Silicon-Controlled Rectifier (SCR) Trigger / Firing Module
Introduction:​ Six-channel phase-angle fire controller for SCR banks in industrial heating and DC drives.
Technical Specifications:
  • 6 independent trigger outputs

GE DS200DSPCH1ACA

Product Name:​ GE Mark V / VI Digital Signal Processor Channel Module
Introduction:​ DSP-based acquisition and processing board handling high-speed turbine protection and control channel math.
Technical Specifications:
  • 16 configurable channels (AI/AO/DI/DO)

GE DS200TCEBG1A

Product Name:​ GE Mark V Protective Termination Expansion Board
Introduction:​ Companion board to PTBA, expanding protection-signal termination count and adding signal transformers for Mark V turbine safeguard loops.
Technical Specifications:
  • 4 onboard signal transformers, 26-pin + multiple 10/20-pin headers

GE TC4040SSE1C

Product Name:​ GE Spectra Series Insulated-Case Circuit Breaker (ICCB)
Introduction:​ Draw-out main breaker for low-voltage switchgear, protecting large 600 V distribution feeders.
Technical Specifications:
  • 4000 A frame, 600 VAC

GE TRLA36BA16

Product Name:​ GE Relay Output Module (16-Channel Latching)
Introduction:​ Discrete output module with magnetic-latch relays for PLC or drive systems requiring state retention during power loss.
Technical Specifications:
  • 16 SPDT channels

GE TH4367RC

Product Name:​ GE Heavy-Duty Safety Switch / Fusible Disconnect (NEMA 3R)
Introduction:​ Outdoor-rated knife-blade disconnect for industrial feeders, providing visible isolation and fuse-based short-circuit protection.
Technical Specifications:
  • 800 A, 600 VAC, 3-pole 4-wire

GE DS200PTBAG1BAA

Product Name:​ GE Speedtronic Mark V Protection Terminal Board
Introduction:​ Field-wiring termination and signal conditioning interface between Mark V turbine control core (P-core) and external protective sensors.
Technical Specifications:
  • Backplane-powered 24 VDC, ~6.5 W