GE

You are here:
  1. Home
  2. GE
  3. Page 5

GE TJ600CS

  • Product Name: GE TJ600S / TJ600CS enclosure or molded-case circuit breaker assembly, TJK frame.
  • Product Overview: A 600‑amp, 3‑pole, 600 V AC General Electric TJK-frame breaker/enclosure package intended for heavy three‑phase power distribution and short‑circuit protection.
  • Technical Specifications:
    • Amperage rating: 600 A

GE IS200TBQGH1A

Product Name:​ TGE (Terminal Board Gas Excitation) I/O Termination Board
Product Overview:​ The IS200TBQGH1A is the TGE variant—Terminal Board Gas Excitation. It handles the critical interface between the Mark VIe controller and the turbine's excitation field circuitry. Unlike its TBQD cousin (which leans toward steam applications), the TGE board has a distinct I/O mapping that accounts for gas turbine start-up sequencing and flame detection interlock signals.

GE IS200TRPAS1A

Product Name:​ 24V DC Special Annunciator Relay Terminal Board
Product Overview:​ The IS200TRPAS1A is a TRPAS series specialized annunciator relay board with 'S1' custom configuration for non-standard alarm applications. The 'S1' tells you it's not a standard configuration—it's a specialized variant designed for specific customer requirements or non-standard annunciation schemes.

GE DS200NATOG3A

Product Name:​ Voltage Feedback Scaling Board
Product Overview:​ The GE DS200NATOG3A is a high-performance voltage feedback scaling board developed by GE for the Mark V series control system. As a core optional component of the LCI ATTE series and various GE brand exciters and drives, its core responsibility is to perform precise integrated AC and DC voltage attenuation of high-voltage signals from the SCR bridge, thereby providing accurate and reliable voltage feedback data to the control system.

GE DS3800NMEC1H1H

Product Name:​ Mark VIe CPU Board / Main Processor and Communication Controller
Product Overview:​ The GE DS3800NMEC1H1H is the primary CPU controller board for the Mark VIe Speedtronic series, used extensively in heavy-duty gas and steam turbine control applications. This VMEbus form-factor processor handles real-time execution of turbine sequencing, fuel control, and protection logic in power generation and industrial drive environments.

GE DS3800NGPA1B1C

Product Name:​ General Purpose Amplifier (NGPA) Board / Gas Turbine Control Board
Product Overview:​ The GE DS3800NGPA1B1C is an analog signal conditioning and scaling hub built for legacy Speedtronic Mark IV turbine control panels. Functioning as a dedicated General Purpose Amplifier (NGPA) board, this module is engineered to accept low-level analog inputs from field sensors—such as pressure transducers, LVDTs, and temperature transmitters—and amplify them into clean, high-level linear signals compatible with the system's central logic processors.

GE DS200UPSAG1AGD

Product Name:​ Power Supply Board
Product Overview:​ The GE DS200UPSAG1AGD is a power supply board for drive control circuits. It provides regulated DC power to drive control circuits and converts 24V DC input into multiple isolated output voltages. The unit mounts inside the drive cabinet as a secondary power source.

GE DS200TCQCG1AHE

Product Name:​ RST Overflow Board
Product Overview:​ The GE DS200TCQCG1AHE belongs to the Mark V series. General Electric designed this board as an RST overflow unit. This component monitors signal levels and triggers reset events. It also prevents data overflow in critical control loops.

GE DS200NATOG3ACB

Product Name:​ Voltage Feedback Scaling Board
Product Overview:​ The DS200NATOG3ACB is a voltage feedback scaling board developed by GE for the Mark V turbine control system. Its primary function is to attenuate and scale AC and DC voltage feedback signals from the SCR bridge, allowing the control system to obtain useful voltage feedback without directly exposing low-level control electronics to the original high-voltage signal.

GE DS3820FEXB1A1A

Product Name:​ GE Fanuc Series 90-70 High-Speed Counter Module
Product Overview:​ The DS3820FEXB1A1A is a 4-channel high-speed counter function module designed by GE Fanuc for the Series 90-70 PLC system, dedicated to encoder signal acquisition, pulse counting, and speed measurement in high-speed signal processing scenarios.
Technical Specifications:
  • Channels: 4 independent high-speed counters

GE F0P3KHF35

Product Name:​ GE Fanuc Series 90-30 32-Point 24VDC Digital Input Module
Product Overview:​ The F0P3KHF35 is a digital input module specially designed for the GE Fanuc Series 90-30 PLC system. It belongs to the F0P series of basic I/O modules, used to acquire field switch signals and transmit them to the PLC processor for logic operation processing.
Technical Specifications:
  • Channels: 32 points

GE 104X106MAG01

Product Name:​ GE Fanuc 90-30 / 90-70 Series Analog Input Module
Product Introduction:​ This module is an analog input I/O module designed by GE Digital (formerly GE Fanuc Automation) for the 90-30 / 90-70 programmable logic controller (PLC) series. It provides 16 independent analog signal acquisition channels for distributed control systems, SCADA data acquisition, and industrial process control.