GE

You are here:
  1. Home
  2. GE
  3. Page 37

GE IC693DNM200-CD

  • Rated Voltage: 12 - 24V DC (positive logic)
  • On - state Voltage Drop: 0.3V DC
  • Output Points: 32
  • Output Current: 0.5A per point, 4A per group, and a maximum of 3A per group common pin
  • Inrush Current: 5.4A for 10ms
  • On/Off Response Time: Maximum 0.5ms
  • Communication Protocol: DeviceNet
  • Data Rates: Supports 125K, 250K, and 500K Baud
  • Backplane Current Consumption: 450mA at 5V DC (typical)
  • Operating Temperature Range: 0℃ - 60℃
  • Storage Temperature Range: - 40℃ - 85℃
  • Mounting Location: In the main rack of Series 90 - 30 (any slot except slots 0 and 1), and in the main rack of PACSystems RX3i (any slot except slot 0)

GE IS200SPIDG1ABA

  • Input Voltage: 220V AC/DC (±15%)
  • Operating Temperature Range: - 30℃ to +65℃
  • Communication Protocol: Profibus DP, Modbus TCP/IP
  • Protection Level: IP20 (for indoor use)
  • Installation Method: DIN rail or panel mounting
  • Dimensions: 159mm (width) x 178mm (height) x 64mm (depth)
  • Weight: 1.0kg
  • Output Frequency: 50kHz
  • Certification: CE, UL, IEC 61131 - 2

GE IC693PWR321 Power Supply Module

Technical Specifications

  • Input Voltage:
    • Rated Voltage: 120/240 V AC
    • Voltage Range: 85-264 V AC
    • Frequency Range: 47-63 Hz
  • Output Voltage:
    • Primary Output: 5 V DC (for PLC logic circuits)
    • Secondary Output: 24 V DC (for I/O modules and peripherals)
  • Output Current:
    • 5 V DC Output: 4 A
    • 24 V DC Output: 1.5 A

GE IC697PWR711 Power Supply Module

Technical Specifications

  • Input Voltage:
    • Rated Voltage: 120/240 V AC
    • Voltage Range: 85-264 V AC
    • Frequency Range: 47-63 Hz
  • Output Voltage:
    • Rated Voltage: 24 V DC
    • Other Output Options: 5 V DC, 12 V DC (specific models may vary)
  • Output Current:
    • Maximum Output Current: 5 A (at 24 V DC)

GE 531X111PSHAPG2 Programmable Controller Module

Technical Specifications

  • Input Voltage: 24 VDC
  • Output Current: Maximum 2 A
  • I/O Configuration:
    • 8 digital input channels (voltage range: 5-30 VDC)
    • 8 digital output channels (voltage range: 5-30 VDC)
    • 4 analog input channels (12-bit resolution)
    • 4 analog output channels (12-bit resolution)
  • Communication Protocols: Supports ProfiBus, DeviceNet, EtherNet/IP, Ethernet, RS-232, and RS-485.
  • Operating Temperature: -20°C to 60°C
  • Storage Temperature: -40°C to 85°C

GE IC752DPA062A Power Supply Module

Technical Specifications

  • Input Voltage: 24 VDC (±10%)
  • Output Voltage: Configurable to meet system requirements (specific output details may vary based on configuration).
  • Power Capacity: Designed to support the power demands of PLCs and peripheral devices in industrial setups.
  • Operating Temperature: -20°C to 70°C
  • Storage Temperature: -40°C to 85°C
  • Relative Humidity: 5% to 95% (non-condensing)
  • Dimensions: Approximately 160 mm × 115 mm × 60 mm (may vary slightly based on specific design).

GE IC697CPX772-HD Communication Module

Technical Specifications

  • Processor: 96 MHz, 32-bit, 80486DX4 microprocessor
  • Memory:
    • 512 KB battery-backed RAM (for program and data storage)
    • 256 KB non-volatile user flash memory
  • I/O Capacity: Supports up to 2K inputs and outputs (any combination) and up to 8K analog I/O points
  • Communication Ports: Three serial ports for flexible networking options
  • Power Supply: 24 VDC (±10%)
  • Operating Temperature: -20°C to 70°C
  • Storage Temperature: -40°C to 85°C

GE IC697BEM763 Ethernet Communication Module

Technical Specifications

  • Manufacturer: GE Fanuc
  • Series: 90-70 Series
  • Type: Ethernet Communication Module
  • Communication Protocol: Ethernet/IP
  • Ports: 1 × 10/100 Mbps adaptive Ethernet port
  • Standards Supported: IEEE 802.3
  • Memory: Built-in large-capacity cache for stable data transmission
  • Processing Speed: High-speed data processing for real-time control applications

GE IC693PCM311H Communication Processor Module

Technical Specifications

  • Processor Type: 32-bit microprocessor for fast and stable data processing.
  • Memory:
    • RAM: 512 KB (expandable to 1 MB).
    • Program Storage: 512 KB flash memory.
    • Data Storage: 256 KB flash memory.
  • I/O Capacity:
    • Supports up to 1024 digital I/O points and 256 analog I/O points.

GE IC693ALG2221NP Analog Input Module

Technical Specifications

  • Input Channels: 8 single-ended or 4 differential analog inputs (configurable).
  • Input Types:
    • Voltage: ±10V, 0–10V, ±5V
    • Current: 4–20mA, 0–20mA (requires external resistor for current-to-voltage conversion).
  • Resolution: 12-bit ADC (analog-to-digital conversion) for accurate signal representation.
  • Accuracy: ±0.1% of full scale at 25°C, ensuring minimal measurement error.
  • Sampling Rate: Up to 100 samples per second per channel for rapid data acquisition.

GE IC660BBS103L 8-Channel Discrete I/O Module

Technical Specifications

  • Module Type: Discrete I/O module
  • I/O Configuration: 8 independent circuits (configurable as inputs or outputs per channel)
  • Input Voltage Range:
    • AC: 93–132 VAC
    • DC: 105–132 VDC
  • Nominal Voltage:
    • AC: 115 VAC
    • DC: 125 VDC

GE IC693313K Digital Output Module

Technical Specifications

  • Output Channels: 16 digital outputs
  • Output Types:
    • AC outputs: 120 VAC or 240 VAC (configurable per group of 8 channels)
    • DC outputs: 24 VDC or 125 VDC (configurable per group of 8 channels)
  • Output Current:
    • AC: 0.5 A per channel (max. 4 A per common)
    • DC: 0.5 A per channel (max. 4 A per common)
  • Voltage Range:
    • AC: 100–132 VAC or 200–264 VAC
    • DC: 24 VDC (18–30 VDC) or 125 VDC (90–140 VDC)