Digital guide
You are here:
GE DS215MVMAH1A
Product Name: GE Mark V RST Analog I/O Board (TCQA)
Product Introduction: The DS215MVMAH1A is a GE Speedtronic Mark V series RST analog I/O board used in gas turbine control systems. Many analog signals read by terminal boards installed on the I/O cores R1, R2, and R3 are scaled and conditioned by the analog I/O board (TCQA).
Detailed content
Board Type: I/O Board (Analog I/O Board)
Series: Mark V
Manufacturer: General Electric
Origin: USA
Signal Conditioning Capabilities: The TCQA board scales and conditions various analog signals including:
-
LVDT inputs
-
Servo valve outputs
-
Thermocouple inputs
-
4-20 mA inputs and outputs
-
Vibration inputs
-
Relay driver outputs
-
Pulse inputs
-
Voltage inputs
-
Generator and line signals
Connector Interfaces:
-
3PL connector: Some signals are written to the STCA board
-
JE connector: Used to send and receive generator and line signals with the TCQC board
-
TBQA board connector JAR/S/T: Carries the core’s thermocouple inputs and cold junction compensation via the JA connector
Signal Processing Detail: The TCQA board scales and conditions 4-20 mA input signals, such as compressor stall detection signals and fuel flow pressure signals.
Working Principle: Through the 3PL connector, conditioned signals are transmitted to COREBUS. The TCQA board scales and conditions analog signals read from terminal boards on the I/O cores, preparing them for further processing within the Mark V control system.
Application Scenarios: Gas turbine control systems within the Mark V series architecture; specifically installed in the I/O cores R1, R2, and R3.
