GE

You are here:
  1. Home
  2. GE
  3. Page 25

GE IS210AEDBH4AGD

  • Product Name:​ GE Mark VIe IS210AEDBH4AGD Digital Input Termination Board
  • Product Description:​ This terminal board serves as the primary interface for discrete field signals entering the Mark VIe system. It is specifically configured for Triple Modular Redundant (TMR) applications, ensuring high reliability for safety-critical systems like turbine controls.

GE IS200EROCH1ADD

  • Product Name:​ GE Mark VIe IS200EROCH1ADD Relay Output Module
  • Product Introduction:​ A critical component of the GE Mark VIe control system, this card provides isolated relay outputs to control field devices such as solenoids, alarms, and motor starters. It acts as the bridge between the digital logic of the controller and the physical plant equipment.

GE FVK364R

  • Product Name:​ GE FVK Series Bus Plug Fuse Clips / Retainers
  • Product Description:​ These are heavy-duty fuse clips designed specifically for integration into GE FVK series bus plugs. They serve as the critical interface holding the current-limiting fuses securely within the bus plug housing, ensuring reliable electrical contact and safety.

GE DS200DCFBG1BLC

Product Name: DS200DCFBG1B Variant “LC” (Coated, Rev B/C, Excitation-Optimized)
Product Brief: Same functional family as DCFBG1B but with conformal coating (L), revised circuit (C), optimized for generator excitation feedback.
Technical Specifications
  • Derived from DCFBG1B: +5/±15/±24 V, field supply, SCR drive

GE IS420YDOAS1B

Product Name: Mark VIe Discrete Output I/O Pack (Relay, 12/16-ch)
Product Brief: Distributed Ethernet-based relay output pack mounted on SRLY/TRLY terminal board for safety-rated discrete outputs.
Technical Specifications
  • Outputs: 12 or 16 Form-C relay contacts (variant dependent)

GE IS200TRPGH1B

Product Name: Mark VI Trip Relay / Pre-Stage Terminal Board
Product Brief: Terminal and pre-driver board handling emergency trip relay logic for Mark VI.
Technical Specifications
  • Terminals: 48 screws across two blocks

GE IS200EPCTG1A

Product Name: Mark VIe Ethernet Protocol Communication Terminal/Interface Card
Product Brief: Ethernet communication interface for Mark VIe controllers linking to HMI, DCS, or peer GE racks.
Technical Specifications
  • Ports: 2 × RJ45 10/100/1000 Mbps (auto)

GE IS200VTCCH1B

Product Name: Mark VI Thermocouple Input Board (VTCC)
Product Brief: 24-channel thermocouple acquisition board for Mark VI turbine exhaust and bearing temperature.
Technical Specifications
  • Channels: 24 thermocouple inputs

GE IS2020ISUCG1A

Product Name: Mark VIe Analog Signal Isolation & Conversion Module (ISU)
Product Brief: Isolated universal analog input conditioner for Mark VIe, converting field 4–20 mA / 0–10 V to backplane digital values.
Technical Specifications
  • Channels: Multiple isolated analog inputs (group isolated)

GE DS200TCCBG8B

Product Name: Mark V TCCA Turbine Control Card
Product Brief: Primary speed/load control board in GE Speedtronic Mark V turbine control system.
Technical Specifications
  • Family: DS200 Mark V

GE IS210BPPBH2B

Product Name: Mark VIe Backplane Processor / Power & Processing Board
Product Brief: Core controller board inside Mark VIe UCS rack; combines control processing with backplane power distribution for I/O packs.
Technical Specifications
  • CPU: 32-bit RISC, 400 MHz

GE EZSFPA36AT0250

Product Name: Spectra RMS SFPA Frame Molded Case Circuit Breaker (MCCB)
Product Brief: 3-pole electronic trip molded case breaker from GE’s Spectra RMS series (now obsolete, superseded by ABB Tmax XT after GE’s electrical business transfer to ABB).