Yokogawa

You are here:
  1. Home
  2. Yokogawa
  3. Page 6

Yokogawa UR1BG3-008-0102-008/Z

Product Overview: The UR1BG3-008-0102-008/Z is a safety-rated I/O interface module for the Yokogawa ProSafe-RS Safety Instrumented System. The configuration 008-0102-008/Z indicates: 008 = 8-channel digital input, 0102 = specific module variant/channel grouping, 008/Z = additional 8-channel configuration with zone-specific termination. This module provides SIL3-certified digital input signal acquisition from field safety devices (emergency stop buttons, limit switches, gas detectors).

Yokogawa MW100-E-1W

Product Series: MW100 Series — Yokogawa Paperless Recorders Product Overview: The MW100-E-1W is a single-width (1W), 1-channel paperless recorder from the Yokogawa MW100 series with built-in Ethernet communication (E). This compact recorder provides high-accuracy process data recording with network connectivity for remote monitoring and data archival.

Yokogawa MX110-V4R-M06

Product Series: MX100/MX110 Series — Yokogawa Paperless Recorders Product Overview: The MX110-V4R-M06 is a single-channel (1-ch) paperless recorder featuring a 4.3-inch color VGA display (V4R) and 64 MB memory (M06). This device replaces traditional chart recorders by digitally recording process data (temperature, pressure, flow, voltage, etc.) with timestamped data logging and alarm management capabilities.

Yokogawa F3NC95-1N

Product Series: F3 I/O Series — CENTUM VP / CENTUM CS 3000 DCS Product Overview: The F3NC95-1N is a single-channel communication interface module for the Yokogawa F3 I/O series. It provides RS-485 serial communication capability, enabling the CENTUM VP/CS 3000 DCS to interface with third-party devices using Modbus RTU and other serial protocols. The 1N suffix indicates a non-redundant single-channel configuration.

Yokogawa FX1012-4-2-L

Product Overview: The FX1012-4-2-L is a 4-channel, 2-wire transmitter input module for the Yokogawa FAST/TOOLS distributed control system. The designation breaks down as: FX1012 (module type), 4 (4 channels), 2 (2-wire 4-20mA input), L (low-power/linear configuration). This module accepts signals from 2-wire loop-powered transmitters (pressure, temperature, flow, level).

Yokogawa F3YP18-0N

Product Series: F3 I/O Series — CENTUM VP / CENTUM CS 3000 Distributed Control System Product Overview: The F3YP18-0N is a 16-point transistor (NPN) output module designed for the Yokogawa CENTUM VP and CENTUM CS 3000 DCS platforms. The 0N suffix indicates a non-redundant (single) configuration. This module provides discrete digital output signals for controlling solenoid valves, indicator lamps, relay coils, and other on/off field devices.

Yokogawa SD1075B02-2PO

Product Series: SD1075 — ProSafe-RS Series Analog I/O Module Product Overview: The SD1075B02-2PO is a 4-channel analog output module from the ProSafe-RS Safety Instrumented System. The B02-2PO variant designation indicates a specific configuration providing 2-channel pulse output capability in addition to standard 4-20mA analog outputs. This module delivers SIL2/SIL3 certified output signals for final control elements in safety loops.

Yokogawa UR1AG3-S1-100N-1LD-2TA-N/CN

Product Series: UR1AG3 — ProSafe-RS Series SIL3 Certified Safety Instrumented System Product Overview: The UR1AG3-S1-100N-1LD-2TA-N/CN is a single-CPU safety programmable logic controller designed for Safety Instrumented System (SIS) applications requiring SIL3 (Safety Integrity Level 3) certification per IEC 61508 and IEC 61511 standards. This unit integrates local I/O and communication capabilities into a compact rack-mounted chassis.

Yokogawa 915U-2-900US

Product Overview: The 915U-2-900US is a battery backup unit (BBU) for the CENTUM VP DCS system. It provides uninterrupted 24 VDC power to critical DCS components (CPU, I/O cards, communication modules) during AC mains power failure. The model code breakdown: 915U = battery backup series, 2 = 2-slot unit, 900 = 900 mAh capacity, US = United States specification (120 VAC input).

Yokogawa F3YP28-0P

Product Overview: The F3YP28-0P is an 8-channel analog input card for the CENTUM VP DCS platform, functionally similar to F3YP22-0P but with extended configuration options and enhanced diagnostics. It accepts 4-20 mA DC (2-wire) signals from field transmitters. The "0P" suffix indicates non-redundant (single) configuration. The "28" variant typically supports additional input range configurations compared to the "22" variant.

Yokogawa F3AD04-5V/CT

Product Overview: The F3AD04-5V/CT is a 4-channel high-precision A/D converter card for the CENTUM VP DCS platform. The "CT" suffix indicates current input (4-20 mA) configuration, and "5V" indicates it is powered by the 5 VDC I/O bus. This card provides 16-bit resolution for high-accuracy analog signal acquisition, suitable for critical process measurements.

Yokogawa TM21001045-2SN

Product Overview: The TM21001045-2SN is a 45-point wiring terminal block module designed for the CENTUM VP and CS3000 DCS I/O stations. It provides organized, secure connection points for field instrument wiring to I/O cards. The "2SN" suffix indicates the terminal block type with screw-clamp connection for reliable wire termination.