Product Introduction: The UT55A000-11-00 is a single-loop digital indicating controller from Yokogawa's UT55A series. It is the most basic configuration of the UT55A family, providing process variable indication only with no control output, no alarm outputs, and no communication. The model code 000-11-00 decodes as: 000 = basic type, 11 = DC 4–20 mA input, 00 = no output option.
Product Introduction: The SD1015B02 is an SD card memory module designed for Yokogawa's UTAdvanced series (UT55A, UT52A, UT51A, UT35A, UT32A, UT31A) and YS1000 series paperless recorders. It provides removable non-volatile data storage for recorded process data, enabling data archiving, transfer, and offline analysis. The B02 suffix indicates the specific generation/revision of the module.
Product Introduction: The SGMPH-01A1E41D is a compact AC servo motor from Yokogawa's Sigma-7 series, designed for high-precision motion control applications. The SGMPH designation indicates a small-frame servo motor with an absolute encoder (E41) and specific winding/connection configuration. This motor delivers high torque density in a small package, ideal for pick-and-place, packaging, semiconductor handling, and precision positioning applications.
Product Introduction: The PH150-AS-AA is a compact 2-wire pH/ORP transmitter from Yokogawa designed for continuous measurement of pH and ORP (Oxidation-Reduction Potential) in industrial process environments. The AS option indicates compatibility with analytical sensors featuring built-in automatic temperature compensation (ATC). The AA suffix denotes specific output and configuration settings.
Product Introduction: The F3RP56-2H/L1/C is a 2-wire loop-powered signal isolator and splitter from Yokogawa's F3RP product family. It provides galvanic isolation between input and output signals while being powered entirely from the 4–20 mA loop current, eliminating the need for a separate power supply. The device converts and distributes process signals to multiple outputs with full electrical isolation.
Product Introduction: The NFDV151-P11 is a 2-channel universal analog input/output module for the FAST/TOOLS DCS platform by Yokogawa. Each channel can be independently configured as either input or output. The suffix "-P11" denotes: P = HART communication enabled, 11 = specific configuration variant (output-biased or specific firmware).
Product Introduction: The CP333D-S1 is a dual-port Ethernet communication processor card for the CENTUM VP DCS by Yokogawa. It provides Vnet/IP and Ethernet/IP communication between the CENTUM VP controller and other systems (SCADA, HIS, MES, OPC servers). The suffix "-S1" denotes the specific firmware/configuration variant for the S1 series communication profile.
Product Introduction: The SDV541-S33/PRP-S3 is a HART protocol communicator and signal validator from Yokogawa's portable instrumentation range. It combines HART communication, 4–20mA loop power, measurement, and simulation functions in a single handheld device. The suffix "-S33/PRP-S3" denotes: S33 = standard configuration with specific accessory set, PRP-S3 = Parallel Redundancy Protocol (PRP) communication capability with firmware variant S3.
Product Introduction: The NFAI835-S00 is an 8-channel universal analog input module for the FAST/TOOLS DCS platform by Yokogawa, functionally identical to the NFAI835-S01 but with a different configuration variant. The suffix "-S00" indicates: S = HART communication enabled, 00 = base configuration variant (differs from S01 in firmware/default settings).
Product Introduction: The SC25V-ALP25-12 is a serial communication interface module for Yokogawa DCS/SCADA systems, specifically designed to provide RS-232C/RS-485 communication between the control system and external devices (PLC, modem, printer, etc.). The suffix "-ALP25-12" specifies the cable: ALP25 = 25-pin D-sub connector, 12 = 12 meter cable length.
Product Introduction: The NFAI835-S01 is an 8-channel universal analog input module for the FAST/TOOLS DCS platform by Yokogawa. It accepts thermocouple, RTD, DC voltage, and DC current signals from field instruments. The suffix "-S01" denotes the specific configuration: S = HART communication enabled, 01 = specific firmware/configuration variant.
Product Introduction: The CACP-JU22D3A is an 8-channel analog input card for the CENTUM VP distributed control system (DCS) by Yokogawa. It accepts 4–20mA DC current inputs from field transmitters and converts them to digital values for the DCS controller. The model code JU22D3A identifies the specific channel configuration and termination type.
