Yokogawa

You are here:
  1. Home
  2. Yokogawa
  3. Page 4

YOKOGAWA AXFA11G-D1-21

Product Introduction: The AXFA11G-D1-21 is a full-spectrum vibration transmitter from Yokogawa's AXFA product line, designed for continuous online vibration monitoring of rotating machinery. The "11G" indicates the standard vibration measurement range (0 to 11 mm/s velocity or equivalent), "D1" specifies the output configuration (4–20 mA + HART), and "21" denotes the mechanical mounting and process connection variant. This transmitter provides comprehensive spectral vibration data for predictive maintenance programs.

YOKOGAWA S5U709924

Product Introduction: The S5U709924 is a spare hardware module for the Yokogawa CENTUM VP and CENTUM CS 3000 Distributed Control Systems. This part number corresponds to a specific I/O or communication interface card used in the S5 I/O station. The exact module function is defined by the S5U prefix, which denotes a universal I/O or link module for the CENTUM DCS architecture.

YOKOGAWA MW100-E-1H

Product Introduction: The MW100-E-1H is a high-precision weight transmitter from Yokogawa's MW100 product line. The "E" designation indicates the enhanced functionality variant, and "1H" specifies the particular output and configuration code. This transmitter converts the low-level millivolt signal from load cells into a standardized 4–20 mA output with HART digital communication capability.

YOKOGAWA DM1A-100G-1D2A

Product Introduction: The DM1A-100G-1D2A is a high-speed digital measurement module designed for the Yokogawa WT5000 Precision Power Analyzer platform. This module enables simultaneous high-bandwidth sampling of voltage and current signals with exceptional accuracy. It carries CE marking certification (4G2-031-2079/CE), confirming compliance with European safety, health, and environmental protection standards.

Yokogawa ACM12-S1

Product Type: 4-Channel Analog Current (4–20 mA) Input Module Product Overview: The Yokogawa ACM12-S1 is a 4-channel analog input module for the Yokogawa FAI (Fieldbus Interface) and CENTUM series DCS systems. It accepts 4–20 mA DC input signals and converts them to digital values for the DCS controller. The "S1" designation indicates the standard accuracy version with 16-bit resolution.

Yokogawa NFAR181-S50

Product Overview: The Yokogawa NFAR181-S50 is a near-infrared absorption sensor specifically designed for online monitoring of dissolved gases in transformer oil. It detects key fault gases including hydrogen (H₂), methane (CH₄), ethane (C₂H₆), ethylene (C₂H₄), acetylene (C₂H₂), carbon monoxide (CO), and carbon dioxide (CO₂). The "S50" suffix denotes the 50 mm optical path length configuration optimized for transformer oil monitoring.

Yokogawa YS1700-101-A34

Product Overview: The Yokogawa YS1700-101-A34 is a 2-wire vibration transmitter from the YS1700 series. It converts vibration signals from piezoelectric velocity or IEPE acceleration sensors into a 4–20 mA DC output proportional to vibration velocity or acceleration. The "101" indicates the measurement type (velocity, 4–20 mA output), and "A34" specifies the configuration parameters including range and filter settings.

Yokogawa YS1360-121

Product Overview: The Yokogawa YS1360-121 is a field-mounted voice alarm from the YS1360 series configured for continuous tone alarm output with integrated LED beacon. The "121" model code specifies a continuous 105 dB tone with red LED beacon and standard mounting configuration. It is designed for hazardous area installations requiring clear audible and visual alarm notification.

Yokogawa DX1043-2-AR1F1

Product Overview: The Yokogawa DX1043-2-AR1F1 is a 4-channel universal paperless recorder from the DX1000 series. The "2" indicates 2 alarm relay outputs, "AR" denotes alarm and event recording capability, "1F1" specifies the communication and power configuration. It is designed for industrial process monitoring in control rooms and field panels.

Yokogawa AQ6370D

Product Overview: The Yokogawa AQ6370D is a benchtop optical spectrum analyzer covering the long-wavelength range from 1200 nm to 2400 nm. It is designed for characterization of optical components, fibers, and systems operating in the O, E, S, C, L, and U bands. The "D" suffix denotes the latest revision with enhanced performance and user interface.

Yokogawa AXG150-CGNF2BA 2AL212B-NNNNN/GRL/CH

Product Overview: The Yokogawa AXG150-CGNF2BA 2AL212B-NNNNN/GRL/CH is a high-performance absolute pressure transmitter featuring a capillary remote seal system. The "CG" indicates gauge/absolute capability, "NF2" specifies the process connection and material, "BA" denotes the output signal type, and "2AL212B" defines the electrical and communication configuration. The "/GRL/CH" suffix indicates the communication protocol (HART) and regional certification (China).

Yokogawa DX1006N-1-4-2

Product Overview: The Yokogawa DX1006N-1-4-2 is a 4-channel universal input paperless recorder from the DX1000N series. It replaces conventional chart recorders by digitally recording, displaying, and transmitting process data. It supports universal input types including thermocouple, RTD, voltage, current, and frequency. The "N" designation indicates the NAMUR-compliant version with isolated inputs.