Others

You are here:
  1. Home
  2. Others
  3. Page 24

KONGSBERG MRU-E-JB3

Technical Specifications
 
  • Roll and Pitch Output
    • Angle Range: ±45 degrees
    • Angular Velocity Range: ±100 degrees/second
    • Resolution: 0.001 degrees
    • Angular Velocity Noise: 0.1 degrees/second RMS
    • Static Accuracy: 0.08 degrees RMS
    • Dynamic Accuracy (±5° Amplitude): 0.08 degrees RMS
    • Scale Factor Error: 0.5% RMS

EATON XV-112-DB-70TWRC-00

Technical Specifications
 
  • Power Supply: 24V DC.
  • Operating Voltage: 24V.
  • Output Current: The maximum output current is 3A/phase.
  • Display: 7 - inch TFT color display with WVGA resolution.
  • Communication Interfaces: Ethernet interface, USB device, RS232, Profibus/MPI, and it also supports 2 CAN interfaces for communication with PLC.
  • Control Modes: Supports protocol position control, speed control, and periodic position control modes.
  • Encoder Resolution: The servo motor encoder can be optionally 20BIT or 17BIT resolution, and the standard is 2500 lines.
  • Pulse Input Frequency: Up to 4MPPS.
  • Speed Frequency Response: Can reach 1200HZ.
  • Overload Capacity: Up to 3 times.

ALSTOM EP3-E-4-A

Technical Specifications
 
  • Communication Protocols: Supports multiple protocols such as Ethernet, CAN, and Modbus for versatile integration.
  • Connectivity: Equipped with multiple input/output ports for connecting various devices and systems.
  • Operating Voltage: Typically rated for 24V DC.
  • Output Voltage: 0 - 10V DC.
  • Current Rating: 4A.
  • Operating Temperature: - 40℃ - + 85℃.
  • Mounting: Can be easily mounted in standard enclosures or on DIN rails.
  • Weight: Approximately 1 kg.

Fireye 45UV5-1101

Compatibility & Integration

  • Controllers: Fireye BurnerLogix™, D-Series, MicroM, and Flame Monitor™ systems.
  • Burner Types: Single-point monitoring for manual, semi-auto, or fully automatic burners.
  • Fuels: Natural gas, diesel, propane, kerosene (not for hydrogen/solar flames).

Alstom Micom P40 AGILE MICOM P141

Application Scenarios

1. Power Distribution Networks
  • MV Feeder Protection: Overcurrent/earth fault protection for 6.6–33kV substations .
  • Fault Location: Pinpoints cable/line faults via impedance-based algorithms .
2. Industrial Facilities
  • Motor/Generator Backup: Protects critical drives in plants using directional overcurrent .
  • Microgrid Control: Manages grid-tie transitions and load balancing .
3. Renewable Integration
  • Solar/Wind Farm Collection Grids: Synchronizes distributed resources with autoreclosing .
4. Transportation & Infrastructure
  • Rail Electrification: Protects catenary systems with distance protection .

NOUENVOG AAP3798102-00131

Application Scenarios

  1. Compressor Control Systems
    • Cameron TA-Series: Manages inlet valve positioning, oil pressure, and vibration monitoring in TA2000/TA3000 compressors .
  2. Energy Infrastructure
    • Pump Stations: Regulates flow/pressure in pipeline transport .
    • Gas Turbine Backup: Synchronizes auxiliary systems during grid failures .
  3. Industrial Automation
    • Production Lines: Interfaces with Schneider/Bently Nevada PLCs for safety interlocks .
    • Remote Monitoring: Transmits operational data to SCADA via Modbus .

Basler BE3-25A Phase Overcurrent Relay

echnical Specifications

  • Sensor Type: CMOS sensor technology optimized for high-speed and high-resolution image capture
  • Resolution: 25 MP (megapixels), providing detailed images for precise analysis
  • Frame Rate: Up to 30 frames per second at full resolution, ensuring smooth video capture even in fast-moving environments
  • Interface: CoaXPress (CXP) interface, supporting high-speed data transfer rates up to 12.5 Gbps per connection, with support for multiple connections
  • Pixel Size: Typically around 3.45 µm, contributing to high sensitivity and dynamic range
  • Shutter Type: Global shutter, minimizing distortion in moving objects

CCC IOC-555-D 17-550555-001 Simplex I/O Card / Communication Control Board

Technical Specifications

  1. I/O Configuration:
    • Digital Inputs: 8 channels .
    • Digital Outputs: 8 channels .
    • Analog I/O:
      • 2 analog inputs and 2 analog outputs (per ) .
      • Note:  describes 32 channels total (digital/analog combined), but this conflicts with earlier sources; the 8+8 digital configuration is consistently verified.

ONLINE DEVELOPMENT 56SAM-810

. Technical Specifications • Form-factor: single-slot 1756-style card for ControlLogix rack • CPU: 32-bit ARM core running Windows CE 5.0 • Memory: 64 MB CompactFlash for OS and user application storage • Power: 5 VDC @ 1.2 A from backplane; total dissipation 6 W • Operating temperature: 0 °C to +60 °C • Dimensions: 145 mm × 35 mm × 127 mm (H × W × D) • Certifications: CE marked, RoHS compliant, UL listed

CUTLER HAMMER JD3250F – Industrial Molded Case Circuit Breaker Frame

Technical Specifications • Voltage Ratings: 600 VAC, 250 VDC • Current Rating: 250 A (frame only; trip unit ordered separately) • Poles: 3 • Interrupting Capacity: 65 kA @ 240 VAC / 35 kA @ 480 VAC / 25 kA @ 600 VAC • Trip Functions: LI (Long-Time & Instantaneous) via field-installable trip units • Mounting: Bolt-on or plug-on; suitable for reverse feed • Standards: UL 489, CSA, IEC 60947-2 • Dimensions: 4.13" × 10" × 4.06" (H×W×D) • Weight: ~3.5 kg (frame only)

UNIOP ETT-VGA-0045 Industrial HMI Touch Panel

VGA Extension Module

Technical Specifications
  • Interface: VGA Input/Output
  • Resolution Support: Up to 1920x1080 pixels at 60Hz refresh rate
  • Cable Length: Typically supports extension lengths up to 45 meters without signal degradation (assuming it's named after its maximum length capability)
  • Power Supply: Usually powered through the VGA interface; however, some models may require external power
  • Operating Temperature: Ranges from 0°C to +50°C
  • Storage Temperature: -20°C to +70°C