Material Composition: Conductors are fine-stranded Class 5 copper per IEC 60228 (560 strands of 0.20 mm diameter each) for maximum flexibility. Insulation is cross-linked polyethylene (XLPE) rated to 90°C continuous. The PUR outer jacket provides exceptional resistance to cutting oils, hydraulic fluids, coolants, and mechanical abrasion — critical for servo motor environments in CNC and machining centers.
The unit incorporates active PFC (Power Factor Correction) achieving power factor > 0.95 at full load. Built-in protections include: short-circuit protection (auto-recovery), overcurrent protection, overvoltage protection, overtemperature protection (thermal shutdown at 85°C internal). A DC OK relay contact (changeover, 250 V AC / 5 A) provides status signaling to the host controller. The wide input voltage range (323–528 V AC) ensures uninterrupted operation during grid voltage sags and swells.
Structural & Mechanical Features: Motor employs a square flange mounting design (NEMA 23 equivalent) with 4 threaded mounting holes on a 140 mm x 140 mm bolt pattern. Rotor is dynamically balanced to G6.3 per ISO 1940-1, ensuring minimal vibration at rated speed. Pre-assembled motor cable exits radially from the rear end, terminated with M23 17-pin connector on the drive side and M23 12-pin connector on the motor side. The integrated multi-turn absolute encoder eliminates the need for homing routines after power loss — absolute position is retained across power cycles.
Model Series: 3BP (Power Supply for X20 I/O Systems) Product Overview: The 3BP152.4 is a 24 V DC / 240 W switch-mode power supply from B&R's 3BP product line, designed for higher-power X20 I/O system configurations requiring more current for multiple I/O modules, servo drives, and additional field devices. It provides regulated 24 V DC output with universal AC input and full protection features.
Model Series: 3BP (Power Supply for X20 I/O Systems) Product Overview: The 3BP151.4 is a 24 V DC / 120 W switch-mode power supply from B&R's 3BP product line, specifically designed to power B&R X20 I/O modules and X20 bus components. It features a universal AC input and provides a stable 24 V DC output with comprehensive protection features.
Model Series: X20 System (AO = Analog Module — Output) Product Overview: The 3AO360.60-1 is a 2-channel analog output module from B&R's X20 I/O system. It generates analog control signals (current or voltage) to drive field actuators such as control valves, variable frequency drives (VFDs), and proportional controllers. The module features 12-bit resolution and supports both 4–20 mA and 0–10 V output ranges.
Model Series: X20 System (AM = Analog Module — Input) Product Overview: The 3AM374.6 is a 4-channel analog input module from B&R's X20 I/O system. It acquires analog signals (current or voltage) from field sensors such as pressure transmitters, temperature sensors, and flow meters. The module provides 12-bit resolution and supports both 4–20 mA and 0–10 V input ranges.
Model Series: APC 300 (Automation PC 300) — 2NC Series CPU Product Overview: The 2NC303.60-1 is the CPU module for B&R's Automation PC 300 (APC 300) industrial computer series. It features an Intel Celeron processor, onboard memory, CompactFlash storage, and dual Gigabit Ethernet interfaces. It serves as the central controller for B&R's X20 and X67 I/O systems, running the B&R Automation Runtime (AR) real-time operating system.
Model Series: 2BP (Industrial Power Supply) Product Overview: The 2BP210.4 is a 24 V DC industrial switch-mode power supply from B&R's 2BP product line. It delivers 120 W of regulated DC power from a universal AC input, suitable for powering I/O modules, sensors, and small actuators in B&R X20 and X67 systems.
Model Series: 2BP (Power Supply for APC 200) Product Overview: The 2BP201.40-010 is a 24 V DC switch-mode power supply (SMPS) specifically designed for B&R's Automation PC 200 (APC 200) series. It provides regulated 24 V DC output with high efficiency and wide input voltage range, enabling operation from global AC mains voltages.
Model Series: X20 System (IF = Input Field) Product Overview: The 0GH-IF260 is a 16-channel digital input module from B&R's X20 I/O system. It is designed for acquiring binary (ON/OFF) signals from sensors, switches, and other field devices in industrial automation applications. The module connects to the X20 bus (Ethernet-based) and provides galvanically isolated input channels.
Model Series: ACOPOS 6D (ACOPOSmicro 6D) Product Overview: The 0GH-DM476 is a single-axis servo drive from B&R's ACOPOS 6D product line. It is a compact, highly integrated digital servo drive designed for precise motion control of permanent magnet synchronous motors (PMSM) and asynchronous motors. The drive features an integrated servo controller and power stage in a single housing, eliminating the need for a separate controller cabinet.
