Digital guide
You are here:
B&R 4C2210.01-510
Material Composition:
Conductors are fine-stranded Class 5 copper per IEC 60228 (560 strands of 0.20 mm diameter each) for maximum flexibility. Insulation is cross-linked polyethylene (XLPE) rated to 90°C continuous. The PUR outer jacket provides exceptional resistance to cutting oils, hydraulic fluids, coolants, and mechanical abrasion — critical for servo motor environments in CNC and machining centers.
Detailed content
Core Technical Specifications:
| Parameter | Value |
|---|---|
| Conductor Cross-Section | 10 mm² (AWG 7 equivalent) |
| Number of Conductors | 4 (3 phases U/V/W + PE) |
| Voltage Rating (U0/U) | 300/500 V (AC) / 750 V (DC) |
| Cable Type | 4C2210 — Servo-rated, double-shielded, PUR-sheathed |
| Outer Sheath Material | PUR (Polyurethane) — oil & abrasion resistant |
| Shielding Configuration | Overall tinned copper braid (coverage > 85%) + individual pair foil shield |
| Cable Length | 5.0 meters (factory-cut) |
| Drive-Side Connector | M23 17-pin male (straight, screw-lock) |
| Motor-Side Connector | M23 12-pin female (straight, pre-crimped) |
| Pin Assignment (Drive Side) | Pins 1–3: U/V/W power, Pin 4: PE, Pins 5–8: Encoder signals, Pins 9–17: Reserved/auxiliary |
| Color Coding | Brown (U), Black (V), Gray (W), Green/Yellow (PE) |
| Current Rating | ~47 A (installation method B, IEC 60364-5-52) |
| Minimum Bend Radius (Fixed) | 5 × cable OD ≈ 75 mm |
| Minimum Bend Radius (Flexible) | 6 × cable OD ≈ 90 mm |
| Ambient Temperature (Fixed) | -5°C to +70°C |
| Ambient Temperature (Flexible) | -15°C to +70°C |
| Fire Behavior | Flame-retardant per IEC 60332-1-2 |
Functional Features:
Factory-assembled connectors with crimp-and-seal technology ensure IP67 connector integrity when mated. Double shielding provides > 60 dB EMC attenuation in the 150 kHz–30 MHz range, fully compliant with EN 61800-3 (EMC for adjustable speed drives). The cable is UL listed and CSA certified for North American installations.
Applicable Industries:
ACOPOS and ACOPOSmulti servo motor connections, CNC machine tool axis drives, robot arm servo feeds, injection molding machine servo axes, printing press drive connections.
Installation Requirements:
Route in cable carrier (drag chain) or conduit. Maintain minimum 100 mm separation from 400 V+ power cables. Secure with cable clamps every 0.5 m along tray runs. Ensure connectors are fully threaded and locked before applying power. Ground the cable shield at both ends to the drive and motor chassis.
Critical Usage Directives:
Never cut or modify cable length in the field. Do not use with non-B&R servo systems without verifying pin compatibility. Inspect connectors for corrosion or pin damage every 6 months. Replace immediately if PUR jacket shows cuts, cracks, or chemical degradation. Maximum continuous operating temperature at conductor: 90°C.
