B&R

You are here:
  1. Home
  2. B&R
  3. Page 8

B&R X20AT2402

Product Type: 2-Channel Analog Input Module (Current/Voltage/Resistance/Thermocouple) Product Introduction: The B&R X20AT2402 is a 2-channel universal analog input module for the B&R X20 distributed I/O system. It accepts four different input signal types: 0-20mA, 4-20mA current, 0-10V voltage, 0-100Ω to 1000Ω resistance (RTD/PTC), and thermocouple (Type J, K, T, N, S, R, B, E). Each channel features 16-bit resolution with configurable filtering for noise rejection in industrial environments.

B&R X20AO4622

Product Introduction: The B&R X20AO4622 is a 4-channel analog output module for the B&R X20 distributed I/O system. It provides four independently configurable analog output channels that can be set to output either 0-20mA / 4-20mA current or 0-10V voltage signals. Each channel features 16-bit resolution, ensuring precise control of actuators such as control valves, variable frequency drives (VFDs), and proportional amplifiers.

B&R MCNT33-0

Product Introduction: The B&R MCNT33-0 is a 3-channel high-speed counter module for the B&R X20 distributed I/O system. It is designed for precise frequency measurement, pulse counting, and encoder evaluation in motion control and process automation applications. Each of the three channels supports input frequencies up to 500 kHz, making it suitable for high-speed encoder interfaces and tachometer signals.

B&R ECPT81-0

Product Introduction: The B&R ECPT81-0 is a 24V DC power supply module designed specifically for the B&R Automation PC 910 series of compact controllers (including ECFP128-0 and related modules). It converts AC mains (100-240V AC) to a regulated 24V DC output to power the controller and connected X20 I/O modules. It features high efficiency, low ripple, and built-in protection circuits for reliable operation in industrial environments.

B&R ECFP128-0

Product Introduction: The B&R ECFP128-0 is a fanless, compact CPU module from the B&R Automation PC 910 series, specifically designed for embedded control applications requiring floating-point arithmetic performance. The "FP" in the model designation indicates the Floating-Point Unit (FPU), and "128" indicates 128 MB DDR RAM. This controller runs B&R Automation Runtime and supports IEC 61131-3 programming alongside real-time Linux (optional). It is engineered for vibration-prone, space-constrained, and maintenance-free installations.

B&R DM435

Product Introduction: The B&R DM435 is a compact, high-performance stepper motor drive from the B&R ACOPOS family. It is designed for precise open-loop and closed-loop position control of 2-phase and 5-phase stepper motors. The DM435 delivers up to 3.5A RMS per phase with advanced microstepping technology, providing smooth motion with minimal vibration and noise. It is ideal for applications requiring precise positioning without the cost and complexity of a servo system with encoder.

B&R D0486 3D0486.6

Product Introduction: The B&R D0486 (Order Number: 3D0486.6) is a compact, high-performance AC servo drive from the B&R ACOPOS family. It is designed for precise motion control of permanent magnet synchronous motors (PMSM) and asynchronous motors (AC induction) in single-axis applications. The D0486.6 variant is configured for 400V AC mains supply with a continuous output current of 6A RMS and a peak current capability of 18A for short-duration overloads.

B&R BRRT360-0

Product Introduction: The B&R BRRT360-0 is a high-performance real-time Ethernet gateway module for the B&R X20 distributed I/O system. It bridges the X20 bus with industrial Ethernet networks, enabling the X20 I/O system to participate in real-time Ethernet protocols including EtherCAT, PROFINET IRT/RT, EtherNet/IP, POWERLINK, and SERCOS III. This module transforms a standard X20 system into a fully networked, real-time capable automation node.

B&R BRADOL-0

Product Type: Analog Reference Voltage Supply Module Product Introduction: The B&R BRADOL-0 is a precision analog reference voltage source module for the B&R X20 bus system. It provides a stable, low-noise reference voltage for all analog input and output modules in the X20 system, ensuring high measurement accuracy and signal integrity across the entire analog I/O chain.

B&R BM4-F-DIO-0

Product Type: Digital Input/Output Bus Terminal Module with F-Fieldbus Interface Product Introduction: The B&R BM4-F-DIO-0 is a compact digital I/O bus terminal module designed for the B&R X20 distributed I/O system. It communicates via the F-Fieldbus (PROFIBUS DP) interface and provides configurable digital input and output channels for industrial automation applications. The module is engineered for high-speed signal processing in harsh industrial environments.

B&R 3NC154.60-2

Product Type: 4-Axis CNC Motion Controller with Integrated PLC and Safety Product Description: The B&R 3NC154.60-2 is a 4-axis CNC controller from B&R's NC product family. It extends the capabilities of the 3NC150-6 with an additional axis, enabling simultaneous 4-axis control for complex machining operations including 4-axis milling, 4-axis lathes, and multi-axis routing. It features full integration with B&R Power Panel systems, including safety PLC functionality.

B&R 3NC150-6

Product Type: 3-Axis CNC Motion Controller Product Description: The B&R 3NC150-6 is a 3-axis CNC controller from B&R's NC product line. It provides full numerical control for milling, drilling, cutting, and routing operations with integrated motion control, PLC, and HMI functionality. It runs the B&R NC runtime software and is designed for integration into B&R Power Panel systems or standalone CNC machines.