Brooks Automation 001-4130-03 1、 Technical specifications Alignment accuracy: ± 2 μ m in the X/Y direction and ± 0.1 mrad in the θ direction. Repeatability: X/Y direction is 0.5 μ m, θ direction is 0.05mrad. Scanning range: ± 20mm in the X/Y direction and ± 5 ° in the θ direction. Speed: 100mm/s in the X/Y direction and 10 °/s in the θ direction.
Radisys SBC486DX66 Technical specifications: Processor: Equipped with the Intel 80486 DX66 processor, running at a frequency of 66MHz, it provides higher computational performance compared to earlier 386 and lower frequency 486 processors. Memory and storage: Supports ECC or non ECC SIMM memory slots, with maximum memory capacity depending on design, typically reaching tens to hundreds of megabytes. In terms of storage, there may be one or more IDE interfaces used to connect hard drives or solid-state storage devices. Expansion capability: Provides ISA or PCI expansion slots, allowing users to add additional interface cards as needed, such as network cards, graphics cards, SCSI controllers, etc. I/O interfaces: including basic serial ports (COM), parallel ports (LPT), keyboard and mouse interfaces, etc., to meet basic peripheral connection requirements.
Rockwell TC-302-02-4M0 It is a fiber optic remote expansion cable, and the following is detailed information about it: technical specifications Cable type: Fiber optic remote expansion cable Connector: SC Fiber type: multimode fiber Transmission distance: 4 meters Data rate: up to 100 Mbps Temperature range: -40 ° C to+85 ° C Protection level: IP67 Material: PVC Functional characteristics Long distance transmission: TC-302-02-4M0 can transmit up to 4 meters, meeting the needs of long-distance data communication. High reliability: Fiber optic transmission provides high reliability and anti-interference, ensuring stable and reliable data transmission. Environmental adaptability: It has an IP67 protection level and can be used in harsh environments, resisting mechanical wear, oil pollution, chemical erosion, and extensive temperature changes. Easy to install: Compact structure, easy to install and maintain. Application scenarios TC-302-02-4M0 is widely used in situations that require remote data communication in harsh environments, such as:
PEPPERL+FUCHS HiD2082 It is a temperature signal regulator module, and the following is detailed information about it: technical specifications Working environment temperature: can work in environments ranging from -4 to 140 degrees Fahrenheit (-20 to 60 degrees Celsius). Power requirement: 24V DC power supply (bus powered). Output signal: Linearized output, ranging from 4 mA to 20 mA, or 1 V to 5 V. Isolation function: Provides 2-channel isolation barriers to reduce signal interference. Functional characteristics Dual channel isolation: HiD2082 has two independent channels, each capable of processing temperature signals and supporting simultaneous monitoring or control of two different temperature points. Signal isolation and conversion: Provides electrical isolation of input signals to reduce interference. At the same time, thermal resistance (RTD) or thermocouple (TC) signals can be converted into standard current or voltage signals, such as 4-20mA or 0-10V, for subsequent signal processing and long-distance transmission. High precision measurement: Ensure the accuracy of temperature measurement, suitable for industrial applications that require high-precision temperature control. Flexible configuration: supports multiple types of temperature sensors, and users can choose the appropriate sensor type for configuration according to their actual needs. Diagnostic function: Integrated with diagnostic function, it can detect open circuits, short circuits, or line faults, which helps with preventive maintenance. Easy to install and maintain: Designed for quick installation and replacement, reducing system downtime. The optional fault monitoring terminal board simplifies the operation and maintenance process. Wide power supply voltage range: Suitable for different on-site power supply conditions. Application scenarios The PEPPERL+FUCHS HiD2082 temperature signal regulator module is widely used in industrial fields that require high-precision temperature monitoring and control, including but not limited to automation control systems, environmental monitoring systems, temperature testing and calibration equipment, etc.
Valmet D202593 1、 Technical specifications Model: D202593 Manufacturer: VALMET Bus type: PROFIBUS DP Transmission rate: up to 12 Mbaud Number of connected I/O modules: up to 24 Dimensions: 85 x 30 x 25 mm Weight: 150 grams Working temperature: -20 ° C to+60 ° C Protection level: IP67 2、 Functional characteristics High speed transmission rate: Supports a transmission rate of up to 12 Mbaud, ensuring efficient data transmission. Multiple I/O module support: Supports up to 24 I/O modules, suitable for industrial automation needs of different scales. Optimized industrial application design: optimized for the industrial environment, capable of withstanding harsh working conditions such as a wide temperature range, strong resistance to vibration and electromagnetic interference. Security features: may include multiple security functions, such as error detection and security chain mechanisms, to ensure the security of industrial automation applications.
| Displacement 1100CC | Brake system Dual hydraulic disc |
| Drive system 2WD/4WD | Tire(F/R) AT26x9-14/AT26x11-14 |
| Max speed 85 km/h | Product size 3676*1550*1942mm |
| Fuel capacity 35L/9.2gal | Loading Qty 40HQ:6PCS |
| Suspension Double A-arm |
