Other brands

You are here:
  1. Home
  2. Other brands

Triconex AO3481 Analog Output Module

Technical Specifications • Channels: 8 isolated analog outputs • Output Ranges: 4–20 mA or 0–10 V, software-selectable • Resolution: 16-bit • Accuracy: ±0.1 % of full scale • Update Rate: ≤10 ms per channel • Power Supply: 24 VDC redundant feed (18–36 VDC range) • Isolation: 1.5 kV AC channel-to-channel, 500 V AC to ground • Operating Temperature: −40 °C to +70 °C • Protection Class: IP20 (panel-mounted) • Certifications: CE, UL, ATEX, IECEx, SIL 3 per IEC 61508

Radisys SBC486DX66 Industrial Single-Board Computer

1. Technical Specifications • Processor: Intel 80486DX @ 66 MHz, 256 KB on-board cache • Memory: 8 MB SIMM RAM (expandable), supports ECC and non-ECC modules • Storage: On-board Flash or CompactFlash socket for disk emulation • Bus Interface: 16-bit ISA, passive backplane compatible • I/O Ports: – 2 × RS-232 serial (16550 UART) – 1 × RS-485 isolated serial – 1 × bi-directional parallel port (SPP/EPP/ECP) – 16 × GPIO lines (TTL) – VGA CRT interface (Cirrus GD5428) – Floppy and IDE headers

CUTLER HAMMER JD3250F – Industrial Molded Case Circuit Breaker Frame

Technical Specifications • Voltage Ratings: 600 VAC, 250 VDC • Current Rating: 250 A (frame only; trip unit ordered separately) • Poles: 3 • Interrupting Capacity: 65 kA @ 240 VAC / 35 kA @ 480 VAC / 25 kA @ 600 VAC • Trip Functions: LI (Long-Time & Instantaneous) via field-installable trip units • Mounting: Bolt-on or plug-on; suitable for reverse feed • Standards: UL 489, CSA, IEC 60947-2 • Dimensions: 4.13" × 10" × 4.06" (H×W×D) • Weight: ~3.5 kg (frame only)

KUKA KSD1-08 Servo Drive Module – Complete Technical Profile

Technical Specifications

  1. Electrical Parameters:
    • Rated Current: 4 A (continuous operation) .
    • Peak Output Current: 8 A (short-term overload) .
    • Power Supply: 24 V DC ±10% .
    • Output Frequency: 50 Hz .
    • Control Modes: Position, velocity, and torque control .
    • Feedback Interfaces:
      • Quadrature encoders (incremental/absolute) .
      • Analog sensors (e.g., displacement, pressure) via multiplexed ADC channels .

KEBA FB201 — Comprehensive Data Sheet

Interface Module / Control System

Technical Specifications
  • Form Factor: Compact design suitable for integration into existing systems
  • Communication Protocols: Supports multiple industry-standard protocols including Ethernet/IP, PROFINET, EtherCAT, and others
  • Input Voltage: Typically operates within standard industrial power supply ranges (e.g., 24V DC)
  • Digital Inputs/Outputs: Configurable I/O points for connecting sensors, actuators, and other peripheral devices
  • Analog Inputs/Outputs: Available options for precise control and feedback mechanisms
  • Environmental Conditions: Designed to operate reliably under industrial conditions, including temperature ranges from 0°C to +55°C and relative humidity up to 95% non-condensing
  • Safety Standards: Compliant with relevant safety and EMC standards for industrial environments

KONGSBERG DPS112 差分全球导航卫星系统（DGNSS）传感器

Technical Specifications:

  • Supports multiple sensor inputs including GPS, gyrocompass, wind sensors, and sonar to achieve precise position and orientation control.
  • Features redundancy in design to ensure continuous operation even if a single component fails.
  • Offers various levels of operational modes ranging from basic position holding to complex trajectory tracking capabilities.
  • Meets International Maritime Organization (IMO) standards for dynamic positioning systems, suitable for use under diverse environmental conditions.

Vibro-meter 200-570-000-014 200-570-101-013

The Vibro-meter 200-570-000-014 and 200-570-101-013 are servo motor modules or controller modules designed for industrial applications, particularly those requiring high precision and reliability. These modules are built on the foundation of the 1900 series, offering enhanced measurement capabilities and operational flexibility.

Vibro-meter 200-566-000-012 200-566-101-012

The Vibro-meter 200-566-000-012 and 200-566-101-012 are input/output communication network interface cards (IOCN) designed for integration within Vibro-meter's VM600 system. These cards facilitate communication between various devices and systems within an industrial automation or process control environment.

Vibro-meter 200-560-000-113 200-560-101-017

The Vibro-meter 200-560-000-113 200-560-101-017, also known as VM600 IOC4T, is an input/output controller module designed for vibration monitoring and control systems. It serves as a signal interface for MPC4 machinery protection cards within the VM600 series.

Vibro-meter 200-560-000-018 200-560-101-015

The Vibro-meter 200-560-000-016 200-560-101-015 VM600 IOC4T is a high-performance input/output (I/O) card designed for industrial monitoring and mechanical protection applications. It is part of the Meggitt sensing system and specifically belongs to the Vibro-Meter vibration meter product line. This card offers reliability, flexibility, and advanced features that cater to various industrial needs.

Vibro-meter 200-560-000-016 200-560-101-015 VM600 IOC4T

The Vibro-meter 200-560-000-016 200-560-101-015 VM600 IOC4T is a high-performance input/output (I/O) card designed for industrial monitoring and mechanical protection applications. It is part of the Meggitt sensing system and specifically belongs to the Vibro-Meter vibration meter product line. This card offers reliability, flexibility, and advanced features that cater to various industrial needs.

Vibro-meter 200-510-070-113 200-510-111-034 VM600 MPC4

The Vibro-meter 200-510-070-113 200-510-111-034 VM600 MPC4 is a high-precision vibration monitoring and analysis instrument designed for measuring and analyzing vibrations in mechanical equipment. It is a key component of the VM600 series mechanical protection system (MPS), offering comprehensive vibration measurement and precise data for industrial applications.